Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[MaLd0n]

Easy Hackintosh with Clover Bootloader on Serie 5, 6, 7, 8, 9 

-Support Olarila Vanilla Hackintosh by making a donation HERE

-About Premium Users you can check HERE

-Problems with Paypal HERE

-Installation Guide HERE

-Hackintosh EFI folders HERE

-Hackintosh USB Remap HERE

-How to update OpenCore and Kexts HERE

-Guides and Tutorials HERE

 

Some Basic Information

-Bios/UEFI configuration check HERE

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

 

a) If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

b) You can request one full ACPI solution HERE and Premium Users HERE

c) After installation you need remove unnecessary files like unused Lan kexts

d) Remove agdpmod=pikera bootarg if you have RX550, RX560, RX570 and RX580 

e) If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

f) Users with IGPU need change SMBIOS and create video patch

 

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux) HERE

1b) How to create USB Installer (Mac) HERE

 

Step 2 - Burning Olarila Images with Balena Etcher with Windows, macOS or Linux

2a) Download Link HERE

 

Step 3 - Downloading correct EFI folder for your hardware with Clover or OpenCore

3a) OpenCore and Clover HERE

3b) OpenCore MOD HERE

 

Step 4 - Copying EFI folder to USB EFI partition with macOS or Windows HERE

 

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

 

Step 6 - Copying EFI folder to SSD EFI partition after Installation HERE

 

Step 7 - Starting a real fine tune with full ACPI solution. About Premium and Donators users check HERE

 

Step 8 - USB Port Mapping HERE

 

Step 9 - Audio Solution HERE

 

Step 10 - Dual Boot with OpenCore and Full ACPI Solution HERE

 

Step 11 - How to update OpenCore bootloader HERE

 

Step 12 - How to generate SMBIOS and Serial on Hackintosh HERE

 

Step 13 - Mobile Intel HD Graphics HERE

 

Step 14 - Run Olarila Repair one time HERE

 

Step 15 - Olarila Guides and Tutorials HERE. More than a hundred tutorials for your Vanilla.

 

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

 

We're all here to have fun and learn from each other! That's all Folks!

[Mirone]

Thanks for the great job, as usual!

[MaLd0n]

Thanks for the great job, as usual!

Thanks, Mirone!

[Allan]

The great guides are back!

Go MaLd0n Go!

[MaLd0n]

The great guides are back!

Go MaLd0n Go!

Thx, Allan!

[aldebaran]

Hi MaldOn,

I am sending you Send me file for my new iMac14,2

Board is Gigabyte Z87MX-D3H

Processor Intel i5-4690

Video card Intel 4600

16 Gb of memory

Bios F8a from 9.12.2014.

Can you also setup config.plist for me. I will add part for SMBIOS.

Thank you

Aldebaran

P.S. Could not send you file because the restriction on attachment.

[MaLd0n]

Hi MaldOn,

I am sending you Send me file for my new iMac14,2

Board is Gigabyte Z87MX-D3H

Processor Intel i5-4690

Video card Intel 4600

16 Gb of memory

Bios F8a from 9.12.2014.

Can you also setup config.plist for me. I will add part for SMBIOS.

Thank you

Aldebaran

P.S. Could not send you file because the restriction on attachment.

up here

http://www.zippyshare.com/

[aldebaran]

MaldOn,

I used link you specified and uploaded file Send me Bootes.zip.

The link is:http://www93.zippyshare.com/v/MdMekh1c/file.html

Thank you for your help.

Regards, Aldebaran

[MaLd0n]

MaldOn,

I used link you specified and uploaded file Send me Bootes.zip.

The link is:http://www93.zippyshare.com/v/MdMekh1c/file.html

Thank you for your help.

Regards, Aldebaran

replace, reboot

CLOVER.zip

[aldebaran]

MaldOn,

Thank you for Clover.zip file.

I will replace it and try it on Monday.

Regards, Aldebaran

[aldebaran]

Hi MaldOn,

I replaced Clover and everything is working.

I have some questions.

1. You added in config.plist SMBIOS part with serial number. Can I use that serial number or I shell generate a new one from clover configurator?

2. EHC1 and EHC2 have no connections. Is that OK?

3. I still have some errors while booting. Those are connected to audio ports not loaded.

What to do next for getting and sending you details?

Regards, Aldebaran

[MaLd0n]

Hi MaldOn,

I replaced Clover and everything is working.

I have some questions.

1. You added in config.plist SMBIOS part with serial number. Can I use that serial number or I shell generate a new one from clover configurator?

2. EHC1 and EHC2 have no connections. Is that OK?

3. I still have some errors while booting. Those are connected to audio ports not loaded.

What to do next for getting and sending you details?

Regards, Aldebaran

send me new files, generate new files

yes, we dont need EHCI, all work inside usb3 bus, is correct

what problems with audio in boot?

[aldebaran]

MaldOn,

One more thing. When monitor turns of (after 15 min) I can not turn it on. It stays black.

Regards, Aldebaran

[aldebaran]

MaldOn,

How can I get and save boot log file?

Regards, Aldebaran

[Mirone]

Run the RunMe App in the first post.

[aldebaran]

MaldOn,

Please find attached new Send me Bootes_1 file.

Hope to solve the problems now and have good working system.

Regards, Aldebaran

Send me Bootes_1.zip

[MaLd0n]

MaldOn,

Please find attached new Send me Bootes_1 file.

Hope to solve the problems now and have good working system.

Regards, Aldebaran

 

the monitor sleep problem, disable it, dont use or try a darkwake options in config.plist

about audio, i dont understand

[aldebaran]

MaLdOn,

Thank you again. System is working OK.

About audio problem maybe Mirone can help.

Now I am getting ready to build another iMac. This time iMac17,1.

Regards, Aldebaran

[Mirone]

MaLdOn,

About audio problem maybe Mirone can help.

 

 

What is the problem with your Audio?

[aldebaran]

Mirone,

During booting it gives some errors.

If I could copy screen during booting I could tell you more about these errors.

Now it runs to fast and I can not read it.

Regards, Aldebaran

[Mirone]

The errors you are referring to are: Sound Assertion?

if yes, and your sound works perfectly you can ignore them.

[aldebaran]

Thank you Mirone,

Errors are about sound assertion. The sound itself is working correctly.

Regards, Aldebaran

[MaLd0n]

Thank you Mirone,

Errors are about sound assertion. The sound itself is working correctly.

Regards, Aldebaran

 

to avoid it use:

com.apple.driver.AppleHDA

536F756E 64206173 73657274 696F6E20

00000000 00000000 00000000 00000000

Patch Assertions

10.11.x,10.12.x,10.13.x

and

com.apple.driver.AppleMikeyDriver

536F756E 64206173 73657274 696F6E20

00000000 00000000 00000000 00000000

Patch Assertions

10.11.x,10.12.x,10.13.x

[aldebaran]

MaLdOn,

Everything is working fine. But looking to everymac I realized that iMac15,1 would be a better match.

What do you suggest. To change the SMBIOS section or not? If yes should I use Clover configurator to generate new SMBIOS?

Regards, Aldebaran

[MaLd0n]

14 or 15 work good