Guide - MSI B360 Gaming Arctic (Catalina)

[MacUser]

scroll to previous posts and download my custom USB kext. Place in clover/kext/other folder and delete any other usb kexts you might have.

 

I tried Sir,but after placing your Kext in other folder usb Mouse and KBD becomes dead.

[onemanosx]

[ref]MacUser[/ref], are you using similar MSI B360 Gaming Arctic? I am assuming you are .. my kext is specific to this board only.

Anyway, upload sendme files so I can take a look later when I am on my mac

[MacUser]

[ref]MacUser[/ref], are you using similar MSI B360 Gaming Arctic? I am assuming you are .. my kext is specific to this board only.

Anyway, upload sendme files so I can take a look later when I am on my mac

 

No i am using Asus B360MA, here is my Send me file....

Send me Riteshs-iMac.zip

[onemanosx]

No i am using Asus B360MA, here is my Send me file....

that explains it then. Sorry for my assumption. I will take a look at your config later the day. Btw, did you test USB 3.0 ports with a proper USB 3.0 device?

[MacUser]

yes i am using Sandisk Dual Drive USB Type-C 32 GB pen drive for testing.

[onemanosx]

[ref]MacUser[/ref], based on your clover boot arg for 15 ports USB, let me know which ports are USB type C, USB 2.0 and 3.1 speed.

[MacUser]

[ref]MacUser[/ref], based on your clover boot arg for 15 ports USB, let me know which ports are USB type C, USB 2.0 and 3.1 speed.

 

Here is my USB list :-

HS07 :- USB 2.0 Connected Keyboard

HS08 :- USB 2.0 Mouse Connected

HS10 :- Front Right USB 2.0

HS11 :- Front left USB 2.0

SS01 :- Back USB 3.1

SS02 :- Back USB 3.1

SS03 :- Back USB Type C

SS04 :- Internal USB I havent tested.

SS05 :- Internal USB I havent tested.

SS06 :- Internal USB I havent tested.

Thanks,

[onemanosx]

[ref]MacUser[/ref], Block USBInjectAll and XHCI-unsupported kext in clover so that they will not load.

Upload a copy of Ioreg as proof.

 

ASUS-B360-USB.kext.zip

 

More can be done to further tweak your build but there are no ACPI tables in origin folder.

And, your clover driver folder needs to be cleaned up. Basically, you either use just aptiomemoryfix or combo of osxaptiofix3+emuvariable. NOT ALL at the same time. You also do not need legacy aptiomemoryfix-64 driver in UEFI

[MacUser]

[ref]MacUser[/ref], Block USBInjectAll and XHCI-unsupported kext in clover so that they will not load.

Upload a copy of Ioreg as proof.

ASUS-B360-USB.kext.zip

More can be done to further tweak your build but there are no ACPI tables in origin folder.

And, your clover driver folder needs to be cleaned up. Basically, you either use just aptiomemoryfix or combo of osxaptiofix3+emuvariable. NOT ALL at the same time. You also do not need legacy aptiomemoryfix-64 driver in UEFI

 

As per your Instruction i have removed 2 kext from "Other" folder and Place your compiled kext.but USB 3 Speed is same as previous.

[onemanosx]

Speed is same as previous.

Proof of ioreg. As I had said, use a true USB type C device to test. Not all devices comply. Do you have other USB type C devices to test?

[MacUser]

Proof of ioreg. As I had said, use a true USB type C device to test. Not all devices comply. Do you have other USB type C devices to test?

 

Did i need to remove usb comment from clover for using new USB kext?

And the Device i am using is brand new,its working very well In Windows 10.

Thanks

Send me Riteshs-iMac.zip

[onemanosx]

Did i need to remove usb comment from clover for using new USB kext?

Yes, you can remove the boot argument. Its only useful if used with USBInjectAll kext. You can also remove Clover's kext to patch USB Patch Limit.

The IOReg shows USB type C speed is detected.

https://imgur.com/olYdf33

https://imgur.com/6nN3z7P

https://imgur.com/CodCuw6

FYI,

0x9 or 0x0A = USB TYPE C

0X3 = USB 3.0

Press F4 at clover bootloader and upload files in clover/acpi/origin folder.

You can also remove the unused kexts as highlighted.

https://imgur.com/wxGENqV

Edited August 2, 2019 by Guest

[MacUser]

As per your Instruction i have remove USB boot argument as well as unwanted kexts. And uploaded Origin folder...

Thanks

ACPI.zip

[onemanosx]

[ref]MacUser[/ref], Place DSDT in clover/acpi/patched

 

DSDT.aml.zip

 

Use renames in Clover

 

change HDAS to HDEF
change HECI to IMEI
change SAT0 to SATA

 

Upload new sendme files for checking.

[MacUser]

[ref]MacUser[/ref], Place DSDT in clover/acpi/patched

DSDT.aml.zip

Use renames in Clover

 

change HDAS to HDEF
change HECI to IMEI
change SAT0 to SATA

 

Upload new sendme files for checking.

 

Why i need to mentioned above comments in config.plist?As i having issue with my USB Speed not with Audio

Thanks

[onemanosx]

 

 

Why i need to mentioned above comments in config.plist?As i having issue with my USB Speed not with Audio

Thanks

if you are certain you do not need any patched DSDT then ignore my approach to assist.

[MacUser]

Please don't mind my questions..i am very noob here,and as per my knowledge DSDT requires only on laptops,hence i raise the question.

I have purchase this hardware only for hackintosh and spend more than 3 month to make stable. but every time i am facing very weird issue so i am really frustrated.on my previous build Z 77 Motherboard the OS is fluid and rock solid everything work out of the box so i though lets make more powerful build ,but things has been changed.

Thanks and Regards,

[onemanosx]

as per my knowledge DSDT requires only on laptops,hence i raise the question

patches are required in any hackintosh machines.

[RandomTech7]

Nice build and guide, I have msi Z390i and everything working fine with clover, but as clover is ending for Hackintosh Im trying to switch to open core but then I lose build in audio.

do you have any plans to switch or try open core?

[onemanosx]

Nice build and guide, I have msi Z390i and everything working fine with clover, but as clover is ending for Hackintosh Im trying to switch to open core but then I lose build in audio.

do you have any plans to switch or try open core?

Thanks for the compliment. Yes, I tried OC on a bootable USB and update it as new releases are available.

Pretty sure Clover wont meet its end anytime soon at all. Why? Clover's feature to allow users to drop tables and mod acpi patches in bootloader menu is an advantage for installation and troubleshooting. That my pov, anyway.

[RandomTech7]

Thanks for the compliment. Yes, I tried OC on a bootable USB and update it as new releases are available.

Pretty sure Clover wont meet its end anytime soon at all. Why? Clover's feature to allow users to drop tables and mod acpi patches in bootloader menu is an advantage for installation and troubleshooting. That my pov, anyway.

Thanks for the good news about Clover, I felt a bit sad to leave that trust worthy bootloader as I'm using it since 10.10.5 Yosemite with no issues.

Now I am getting back to Clover and gonna keep it for ever ok as long as it stays alive Thanks again!

[onemanosx]

Now I am getting back to Clover and gonna keep it for ever ok as long as it stays alive Thanks again!

Relax and Enjoy!

[DROMGBA]

AppleALC.kext + Lilu.kext

[bikas4u]

Hi onemanosx,

I am new to hackintoshing but luckily I have the the same motherboard (MSI B360 Gaming Arctic).

I have got it to install and working but I am not sure it I have done it properly.

Do you mind sharing your EFI folder and DSDT patch?

Thanks

[novemberman]

Hi , and thanks a lot for sharing your experience;  i've been reading this topic now because i'm planning to build one similar hackintosh.

But small difference on motherboard : msi b360 gaming plus with i5 8400 and rx 580  (So very close to yours.)

You started this topic in 2018 so i understand at that time you would use smbios 18,3 which make sense.

I guess now i could go with smbios 19,2 (wich is for actual Apple iMac core i5 - 8500)

Am I right, and what other changes you would suggest ?

thanks a lot