Yago Farias Posted April 25, 2021 Posted April 25, 2021 Criei o pendrive bootavel com a imagem do Mojave que o site disponibiliza... Tudo ok mais na hora de instalar no notebook não aparece a opção de instalar como resolvo isto ?
anto barreca Posted April 25, 2021 Posted April 25, 2021 28 minutes ago, Yago Farias said: Criei o pendrive bootavel com a imagem do Mojave que o site disponibiliza... Tudo ok mais na hora de instalar no notebook não aparece a opção de instalar como resolvo isto ? You have Select the usb stick from the bios? and it does not start?
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 https://prntscr.com/120p3cloque aparece na hora de instalar alguem ajuda por favor Just now, anto barreca said: You have Select the usb stick from the bios? and it does not start? I sent a picture of how it looks up there!
anto barreca Posted April 25, 2021 Posted April 25, 2021 4 minutes ago, Yago Farias said: https://prntscr.com/120p3cloque aparece na hora de instalar alguem ajuda por favor I sent a picture of how it looks up there! Clover is started, you have set bios right? Don t show the installer https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/kaby-lake.html#cleaning-up
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 (edited) 5 minutes ago, anto barreca said: Clover é iniciado, você configurou a bios, certo? Não mostre o instalador https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/kaby-lake.html#cleaning-up I am new in the middle of hackintosh and I want to install it on my notebook .. I am struggling for hours to solve this problem I do not understand much ... so my difficulty I really want to learn how to properly install my notebook is a samsung expert x23 model 2017 (np300e5m-xd1br) Processor: i5 7200U memory: 8gb hd: 1tb Graphics: gt 920mx Edited April 25, 2021 by Yago Farias
anto barreca Posted April 25, 2021 Posted April 25, 2021 2 minutes ago, Yago Farias said: I am new in the middle of hackintosh and I want to install it on my notebook .. I am struggling for hours to solve this problem I do not understand much ... so my difficulty I really want to learn how to properly install my notebook is a samsung expert x23 model 2017 (np300e5m-xd1br) Processor: i5 7200U memory: 8gb hd: 1tb Graphics: gt 920mx However, it is important that you have set the bios correctly sorry which image did you download?
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 14 minutes ago, anto barreca said: No entanto, é importante que você tenha configurado o BIOS corretamente desculpe qual imagem você baixou? --CATALINA Olarila-- Link MediaFire - https://tinyurl.com/y3mlf4of e a --MOJAVE Olarila-- Link MediaFire - https://tinyurl.com/y4ls8a4t the bios of my notebook is the new one from samsung ... it is very limited
anto barreca Posted April 25, 2021 Posted April 25, 2021 you need to disable this Disable Fast Boot Secure Boot Serial/COM Port Parallel Port VT-d (can be enabled if you set DisableIoMapper to YES) CSM Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly) Intel SGX Intel Platform Trust CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 Disable this in the bios of the pc itself or in the boot of the clover?
anto barreca Posted April 25, 2021 Posted April 25, 2021 2 minutes ago, anto barreca said: you need to disable this Disable Fast Boot Secure Boot Serial/COM Port Parallel Port VT-d (can be enabled if you set DisableIoMapper to YES) CSM Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly) Intel SGX Intel Platform Trust CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled) i'm not sure if it's compatible but i would disable your gtx, Just now, Yago Farias said: Disable this in the bios of the pc itself or in the boot of the clover? in the bios and these are the ones you need to enable Enable VT-x Above 4G decoding Hyper-Threading Execute Disable Bit EHCI/XHCI Hand-off OS type: Windows 8.1/10 UEFI Mode DVMT Pre-Allocated(iGPU Memory): 64MB SATA Mode: AHCI
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 (edited) 12 minutes ago, anto barreca said: i'm not sure if it's compatible but i would disable your gtx, in the bios I disabled what I could disable, but it still didn't work Edited April 25, 2021 by Yago Farias
anto barreca Posted April 25, 2021 Posted April 25, 2021 this ? OS type: Windows 8.1/10 UEFI Mode DVMT Pre-Allocated(iGPU Memory): 64MB SATA Mode: AHCI EHCI/XHCI Hand-off
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 5 buttons appear with the windows flag 1 - boot mircrosoft EFI boot from EFI 2 - boot from 3 - boot from EFI 4 - boot from legacy HD3 5 - boot from legacy HD4 Just now, Yago Farias said: 5 buttons appear with the windows flag 1 - boot mircrosoft EFI boot from EFI 2 - boot from 3 - boot from EFI 4 - boot from legacy HD3 5 - boot from legacy HD4 https://prntscr.com/120skju
anto barreca Posted April 25, 2021 Posted April 25, 2021 Just now, Yago Farias said: 5 buttons appear with the windows flag 1 - boot mircrosoft EFI boot from EFI 2 - boot from 3 - boot from EFI 4 - boot from legacy HD3 5 - boot from legacy HD4 thi is clover boot menu you need operating in the bios of pc chance sata to haci mode ,csm disable ,os type uefi mode, DVMT 64MB ,fastboot disable,secure boot disable ,serial / parallel port disable
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 6 minutes ago, anto barreca said: esta ? Tipo de sistema operacional: Windows 8.1 / 10 Modo UEFI DVMT pré-alocado (memória iGPU): 64 MB Modo SATA: AHCI Transferência EHCI / XHCI this does not have in the laptop bios 2 minutes ago, anto barreca said: thi is clover boot menu you need operating in the bios of pc chance sata to haci mode ,csm disable ,os type uefi mode, DVMT 64MB ,fastboot disable,secure boot disable ,serial / parallel port disable I did not understand this guy has an earlier version of mine @Anto Barreca
anto barreca Posted April 25, 2021 Posted April 25, 2021 (edited) 23 minutes ago, Yago Farias said: this does not have in the laptop bios I did not understand this guy has an earlier version of mine @Anto Barreca as I thought it is not compatible .. it must be disabled from the bios ,take a look here https://downloadcenter.samsung.com/content/UM/201702/20170217144647887/Win10_Manual_ENG.pdf they are these option Turn on the computer. 2 Before the Samsung logo appears, press the F2 key several times. 3 Select the Boot menu. 4 Set Fast BIOS Mode to Off. 5 Set Secure Boot Control to Off. 6 Set OS Mode Selection to uefi mode and then restart the computer. Edited April 25, 2021 by anto barreca
Yago Farias Posted April 25, 2021 Author Posted April 25, 2021 changed some things more then I'll be back all over again I leave only the CSM OS mode activated there, when I enter the MAC OS startup, it changes to CSM AND UEFI OS @Anto Barreca are you still there ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now