onemanosx

Place my DSDT in ACPI/Patched folder and use my config.plist. reboot and generate new send me files. Your last sendme is missing my DSDT and config.plist.

[ref]juanjor87[/ref], You did not boot with my clover folder

[ref]keeyin[/ref], Please test this and generate new sendme files. DSDT.aml.zip

Attach sendme files with polling mode

[ref]juanjor87[/ref], Replace Clover folder and reboot. CLOVER.zip Please generate and upload new SendMe files for fine tune.

Just return everything to native with no GPIO pinning Device (ETPD) { Name (SBFB, ResourceTemplate () { I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C1", 0x00, ResourceConsumer, _Y31, Exclusive, ) }) Name (SBFI, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, ) { 0x0000005F, } }) ...... Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Return (ConcatenateResTemplate (SBFB, SBFI)) }

[ref]keeyin[/ref], No. Return _CRS SBFB,SBFI is considered Polling. But, Make sure your edits are native i.e reinstate native SBFI and remove SBFG code

[ref]keeyin[/ref], Have you tried polling mode?

In your case, You need to look at the GPI0 IRQ table with multiple communities. On an unrelated note, you can delete the highlighted kexts. You dont need them. https://imgur.com/p3y8tJD

[ref]keeyin[/ref], VoodooI2CHID kext is missing from kext folder.

Read my post again about brightness hotkeys and bluetooth.

[ref]keeyin[/ref], Upload full sendme dump. For Cannonlake with APIC 0x5f, there are 3 pins options you can test with and 0x47 is not one of them.

Have you reboot and check the track pad? Polling mode is implemented automatically by I2C kexts with native DSDT settings. Also check that accessibility preferences are unchecked, advanced bios for track pad are enabled (if available) and delete plugin kexts inside voodooPS2controller kext Reference: https://Olarila.com/forum/viewtopic.php?f=46&t=8087

[ref]keeyin[/ref], Change your I2C patch as follows <dict> <key>Comment</key> <string>Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar</string> <key>Name</key> <string>com.apple.driver.AppleIntelLpssI2C</string> <key>Find</key> <data>SU9LaXQ=</data> <key>Replace</key> <data>SU9LaXM=</data> <key>InfoPlistPatch</key> <true/> </dict> <dict> <key>Comment</key> <string>Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar</string> <key>Name</key> <string>com.apple.driver.AppleIntelLpssI2CController</string> <key>Find</key> <data>SU9LaXQ=</data> <key>Replace</key> <data>SU9LaXM=</data> <key>InfoPlistPatch</key> <true/> </dict> or follow this if its easier ( the HEX values in your config are different) https://imgur.com/VWQcVv7 Reboot. Your track pad should work in polling mode

[ref]Rajbirbal[/ref], With no sufficient information, I cannot help further. Thank your for that image, now I know the fault lies in one of the clover patch. Reboot with this DSDT and check for sleep and hotkeys. DSDT.aml.zip If hotkey dont work, then you ARE required to follow this guide. https://Olarila.com/forum/viewtopic.php?f=28&t=8396 If bluetooth is not Apple's supported Broadcom sometimes it works.

[ref]juanjor87[/ref], Can your extract Clover/ACPI/Origin files? At clover boot loader, press F4.

Boot with voodooI2c kexts and extract sendme files. RunMe

[ref]cachiputi[/ref], HEVC supports for Skylake+ Read first post. https://i.imgur.com/PQJlG5D.png

[ref]juanjor87[/ref], Run app and upload sendme files RunMe

Frankly, I cant help any further with this kind of feedback. No screenshots of error etc.. nothing. I stand corrected from the fact that in your recent SendMe records, you did not use the hotkey patched DSDT. Thus the hotkeys never worked.

Your latest RunME files did not contain the DSDT that was configured for your brightness button. Did you really replace the file? Nonetheless, I attach again the DSDT and config.plist. Replace both files in clover with these, reboot and upload new sendme files. Archive.zip

Good to know trackpad works smooth and that was my main target all along. If you can follow the hotkey guide that will be best, otherwise I will look into the patching again later. will send you another DSDT later in the evening. For audio, you can try other layout id that gives the best output and functionality. Other than that, there's nothing can be done. You have a clean clover folder now. Do not add unnecessary SSDT/Kexts unless you know what it is for. Later!

[ref]Rajbirbal[/ref], are you referring to brightness slider or brightness hotkeys? Were your hotkeys working previously as the patch was similar to your implemented SSDT? Otherwise, you will need to follow these steps here https://Olarila.com/forum/viewtopic.php?f=28&t=8396 Only user can do this test on their own. Good Luck! I assume trackpad is working better? You did not feedback.

[ref]Rajbirbal[/ref], Replace DSDT. Dont change anything. Reboot. Check brightness keys. Upload new sendme. DSDT.aml.zip

You ARE still not doing everything. 1. You re-enabled _DSM to XDSM which I clearly told you to disable. 2. You did not place the 2 clover patches I told you to. Replace Clover folder. Reboot. Dont change anything. Extract new sendme. CLOVER.zip