bonejoev
-
Posts
146 -
Joined
-
Last visited
Everything posted by bonejoev
-
I tried it all, and nothing, I don't know if my kextcache is working properly, should is do it manual, this is the issue that I'm having, I keep putting the layout ID one by one and nothing. should I do the following every time I change layout ID.. sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextchache -Boot -U /
-
I opened the hackingtool and it says in the audio section layoutID = 0, when I edited the config.plist to be 13, I don't know if the hackingtool is supposed to reflect the loaded config.plist or not.
-
here is my DSDT..... what's not working right now... not working Audio ( DSDT has to have the correct layout ID, 13,33,84) sleep ( it goes to sleep, but when it wakes the screen stay dark) DSDT.aml.zip
-
Mald0n can you then Edit my DSDT to reflect the right layout Id and also fix sleep, once those two things are fixed I would have a perfect hackintosh thanks
-
I opened the hackintool and is already checked Added in 11 minutes 5 seconds: now when I keep checking the hackingtool software it says in audio that the current layout is 3, when I've set to 84
-
Yes, it goes to sleep, but screen does not display anything when I wake it up
-
I appreciate the help.... I changed the layout ids one by one and nothing ? What could be wrong? What about sleep, it still doesn’t work.
-
Is a 92HD91BXX Here’s the link with the full info https://mega.nz/#!4xMjwK6R!ISU49q9pMABIN3L-rGEgi2Nc0iWpLQpJU08JCTMWmwY Added in 43 seconds: Is a 92HD91BXX Here’s the link with the full info https://mega.nz/#!4xMjwK6R!ISU49q9pMABIN3L-rGEgi2Nc0iWpLQpJU08JCTMWmwY
-
Mald0n, everything works except for audio and sleep, I tried all the layout ids and didn’t work, is that really the layout of that correspond to my laptop?
-
thanks Mald0n, here my send_me file https://mega.nz/#!FkcEGIhS!JG81dna67eIzod4pZqmfk8JrjVv8CjNq7wmwTGmSq6s not working.. Audio Sleep camera mic working... screen brightness
-
Mald0n, you did a fine job, I am able to boot, the system recognizes the HDD, also I used rehabman configHD40001600x900.plist file which makes the screen visible, of course this is not a perfect Hackintosh but I believe I'm almost there not working audio camera mic Battery status screen brightness sleep ( it goes to sleep but when wakes up, screen stays black) codec info https://mega.nz/#!s1FHHILT!TZAnBUXAeqzHso9jy-VILCREBW4n5wyvTbMYuEv7NGg help please
-
I was able to get the HDD recognize and booted into the os, but I can only see the screen if I attached a monitor to the HDMI otherwise is a black screen on the laptop's monitor
-
this is the original DSDTs from Clover boot https://mega.nz/#!Epk20QaK!_3CBQjTlJmPJY0Mn1_drce4j6IV9_S1I03zEZJIRQFw
-
I don't see it, maybe because I wasn't looking for it, but now I'm going to analyze the boot, another thing Is that when I go to the bios, it really doesn't give the option to change the disk mode, I don't see the option for AHCI and I've looked extensively, Added in 41 minutes 32 seconds: thank you for your time Mald0n, I just found this out on my laptop https://h30434.www3.hp.com/t5/Notebooks-Archive-Read-Only/How-to-enable-AHCI-for-HP-ENVY-TouchSmart-m6-k015dx/m-p/3310507#M115130 it turns out that my laptop doesn't support AHCI due to a technical reason that HP decided to exclude and replace by RAID my question to you, is there a workaround to install osx in a situation like this?
-
I did try it, but nothing happened
-
Mald0n your Folder works, but the issue is that I can't see sata drives, how do I fix that, when I'm in the installer I can't see the hard drives attached. I checked the UEFI bios everything looks find,
-
I manage to boot the USB base on your modified Clover folder, but no display, I connected an external display and the installation appear, but there's no HDD visible
-
thank you Mald0n, and your trouble won't be unrewarded, I used your CLOVER folder, and everything seems to boot fine, but when booted the screen is black nothing is displaying
-
this is a usb stick with Mojave https://mega.nz/#!dlFxXIaZ!W1a-L6aTdz-df7Il8rsR8vwmXOZYAHKdAAAAAAAAAAA HP ENVY DV7-7250us has a i7 3630QM
-
I don't know, maybe my config file needs to be checked..... you want me to a clean install, without any patches?
-
what do you mean? Added in 3 minutes 38 seconds: [ref]bonejoev[/ref], u use a usb 2 port? check ur private messenger here I connected the drive to usb and booted, everything seem to have loaded but the screen is black no log in screen, not kernel panic, but no display now. when I connect the hdd to SATA that's when I get the freeze and then it gets distorted.
-
so Mald0n how do I fix the USB problem that's causing my install to stall base on the video that I showed you https://mega.nz/#!Q5UXkC6C!wCAK161YC7PfSSQr69xh0MaT0GrBYTFwm_f44zcLnxg
-
I never had a working folder, I was starting from scratch, by requesting my DSDT to be patched, I think we're making progress
-
I'm sorry Maldon, I don't understand "worming" folder??
-
is loading from HHD