mapomme

Hello, I have installed Ventura Beta on my laptop Lenovo X1 Yoga 3rd gen I have used these files : EFI.Opencore.NoteBook.KabyLake OpenCore-0.8.3-RELEASE Lilu-1.6.2-RELEASE AirportItlwm-Ventura-v2.2.0-DEBUG-alpha-d9f1294 VoodooI2C-2.7 VoodooPS2Controller-2.2.9 But touchscreen and bluetooth are not working. Help would be appreciated Thanks

I have added ig-platform-id and set shared memory to 256Mo but there is still no hardware acceleration

Hello, I have installed macOS Monterey with Clover and it works I have no graphic accelaration, I have changed SMBIOS to iMac 19,1 I have added this boot arguments igfxonln=1 and this device properties in config.plist <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data>BwCbPg==</data> <key>framebuffer-patch-enable</key> <data>AQAAAA==</data> <key>framebuffer-con0-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-enable</key> <data>AQAAAA==</data> <key>framebuffer-con2-enable</key> <data>AQAAAA==</data> <key>framebuffer-con0-alldata</key> <data>AQAJAAAEAADHAwAA</data> <key>framebuffer-con1-alldata</key> <data>AgAKAAAEAADHAwAA</data> <key>framebuffer-con2-alldata</key> <data>AwQIAAAIAADHAwAA</data> <key>framebuffer-stolenmem</key> <data>AAAwAQ==</data> <key>hda-gfx</key> <string>onboard-1</string> <key>name</key> <string>Intel UHD Graphics 630</string> </dict> but it does not work Can you help?

Hello, I will create a video patch Is it possible you tell me why it is working with Big Sur and not with Monterey? Thank you for your help

Hi, I installed with default BIOS settings (RAID disabled). The first part of the installation of macOS Monterey works then I interrupted the installation because the computer was restarting about fifteen times without succeeding. I tried to install macOS Big Sur and it works but graphics acceleration is disabled. Big Sur works with Samsung EVO 970 SSD plugged in and RAID1 is seen correctly. I don't know what to do to make it works with monterey : can you help? I can make a donation if you want to fix the problems

Hello, I have updated the firmware of the SSD but there is still the same problem. I have two hard drive in RAID1 : Could they cause the problem?

Hello, It is a Samsung V-NAND SSD 970 EVO NVMe M.2 250 GB

Hi, Thank you for your help I added -igfxvesa and was able to install. I had to add the kext SATA-unsupported for the installer to detect my SATA hard drives and the installation on a SATA hard drive went well. But now when I start the computer to finish the installation process, the pc restarts by itself when I have to choose the language. Do you know what the problem is? Thank you very much for your help

Hello, I want to install macOS Monterey on this desktop pc : - AsRock H370M-itx/ac - Intel Core i3 8100 - Intel UHD Graphics 630 - Corsair Vengeance LPX 16 Go (2x8 Go) DDR4 2400MHz - SSD M2 Nvme Samsung I have create a usb install key with createinstallmedia command. I have tried to boot with your Clover and OpenCore folders for Mobos Serie 300. The pc boots but after a few seconds, the screen turns off and I have to reboot the pc. Can you help me? Thanks

Hello, Here is a link to my OpenCore folder OpenCore folder for Monterey on Lenovo X1 Yoga 3rd gen 2018 I can't tell you what I exactly did because the folder is a mix between multiple OpenCore folders I have found on internet. Maybe there are extra files and settings and some are missing. Hope it helps! List of what is working : - WiFi - Bluetooth - Keyboard - Joystick - Touchpad - Touchscreen - Sleep - USB 3.0 Type A ports - Audio - microSD card reader - battery

Hello, I have added AppleALC.kext in OpenCore and "-alcid=11" in boot arguments and now sound works : thanks When I add IntelBluetoothInjector.kext and IntelBluetoothFirmware.kext in OpenCore, macOS boots very slowly and in system parameters I can not open Bluetooth panel and Wifi does not work.

Hello, I managed to make touchpad, joystick, wifi and touch screen work. Can you help me for audio and bluetooth? For the bluettoh, I have added these two kexts but then macOS does not boot: IntelBluetoothFirmware.kext IntelBluetoothInjector.kext Thanks :)

Hello MaLdOn, Thank you for your help, I have installed AsusSMC-1.4.1-RELEASE but there is no change I am not sure if I did properly. - I put AsusSMC.kext in OpenCore kexts folder and add an entry in config.plist - I run the command in install_daemon.sh I use OpenCore on the ssd macOS boot to desktop but the peripherals still don't work.

Hello, I have restored the BIOS defaults parameters and I was able to install Monterey. But these peripherals don't work : - touchpad, joystick, wifi and bluetooth, audio My Wi-Fi and Bluetooth card is an Intel 8265 : does it work with macOS?

Hello, I have a 3rd generation Lenovo X1 Yoga laptop and I would like to install macOS Monterey. I created a macOS Monterey installation usb key with the "create install media" command. I copied the Clover folder for laptop with Kaby Lake processor on the usb key. I press F12 to be able to boot on the USB key but the usb key does not boot. I copied the same Clover folder to the EFI partition of the internal ssd and created a UEFI boot entry with Easy UEFI software on Windows, but that doesn't boot either. Can someone tell me how to start Clover from usb key or ssd on this computer? Help would be greatly appreciated