Hackintosh Guide - Install MacOS Catalina with Intel 10th Mobile Processors using OpenCore bootloader

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

rositaott · August 1, 2020

6 hours ago, MaLd0n said:

u know what ur embedded controller?

what ur notebook?

Notebook Dell Inspiron 5593 i5-1035G1 8GB 512SSD 15.6" MX230 2GB

14 minutes ago, rositaott said:

Notebook Dell Inspiron 5593 i5-1035G1 8GB 512SSD 15.6" MX230 2GB

I extracted these aml files from windows

aml.zip

MaLd0n · August 1, 2020

12 hours ago, rositaott said:

I extracted these aml files from windows

what efi folder u use? send me this folder

rositaott · August 1, 2020

19 minutes ago, MaLd0n said:

what efi folder u use? send me this folder

Quote

https://tinyurl.com/ybwr9kq3

from that link ✌️

1 minute ago, rositaott said:

from that link ✌️

then extract DSDT & SSDT-EC file from windows from this link

Quote

https://github.com/corpnewt/SSDTTime

MaLd0n · August 1, 2020

7 minutes ago, rositaott said:

from that link

use this folder

http://s000.tinyupload.com/index.php?file_id=70213875618284026209

reset nvram first time

rositaott · August 1, 2020

5 minutes ago, MaLd0n said:

use this folder

http://s000.tinyupload.com/index.php?file_id=70213875618284026209

reset nvram first time

Installing now ...thank you...so what folder I suppose to download by the way cause I think I've tried every folder for 10th gen and with 400 series

7 minutes ago, rositaott said:

Installing now ...thank you...so what folder I suppose to download by the way cause I think I've tried every folder for 10th gen and with 400 series

another issue here, can't see my SSD form DiskUtility even show all devices

https://imgur.com/a/yaqmJcM

MaLd0n · August 1, 2020

15 minutes ago, rositaott said:

another issue here, can't see my SSD form DiskUtility even show all devices

Big Sur?

rositaott · August 1, 2020

1 minute ago, MaLd0n said:

Big Sur?

Catalina

uncletonn · August 1, 2020

ACER NITRO 5 AN515-55-517N cannot boot this EFI

MaLd0n · August 1, 2020

2 minutes ago, rositaott said:

Catalina

check bios/uefi, sata mode

1 minute ago, uncletonn said:

ACER NITRO 5 AN515-55-517N cannot boot this EFI

use ec0 to ec rename and sta rtc fix

rositaott · August 1, 2020

Quote

check bios/uefi, sata mode

no this option in my bios, (secure boot already disabled)

6 minutes ago, rositaott said:

no this option in my bios, (secure boot already disabled)

my bios setting

Quote

https://imgur.com/a/67hNsiY

MaLd0n · August 1, 2020

2 hours ago, rositaott said:

no this option in my bios, (secure boot already disabled)

check if have bios/uefi update

uncletonn · August 1, 2020

3 hours ago, MaLd0n said:

check bios/uefi, sata mode

use ec0 to ec rename and sta rtc fix

I still can not boot i5 10300h Comit lake not support?

But i can boot config2 from efi olarila 10.15.6

MaLd0n · August 2, 2020

9 hours ago, uncletonn said:

I still can not boot i5 10300h Comit lake not support?

video is a mistery for now

trackpad need update in voodooi2c, try add dev id inside kext

rositaott · August 2, 2020

Hi @MaLd0n, this is what happened when after updating bios, very strange.stil usingte lst EFI you send.

Edited August 2, 2020 by rositaott

MaLd0n · August 2, 2020

5 hours ago, rositaott said:

Hi @MaLd0n, this is what happened when after updating bios, very strange.stil usingte lst EFI you send.

This error is about unsupported smbios change it

rositaott · August 3, 2020

7 hours ago, MaLd0n said:

This error is about unsupported smbios change it

Yeah, strange thing is I use the same USB stick with the EFI folder you send from link which normally booted until recovery, then after bios update, already have that error.

MaLd0n · August 3, 2020

17 hours ago, rositaott said:

Yeah, strange thing is I use the same USB stick with the EFI folder you send from link which normally booted until recovery, then after bios update, already have that error.

use -no_compat_check

bss111 · August 17, 2020

On 5/30/2020 at 2:08 AM, MaLd0n said:

-Tutorial

https://tinyurl.com/yyfa7mfa

good

MaLd0n · August 17, 2020

Enjoy!

Paolo7297 · September 16, 2020

Hi, i have this kernel panic when going to sleep:

panic(cpu 2 caller 0xffffff7f8611c09e): "[IGFB][PANIC][POWER    ] " "Cannot allow DC9 without disallowing DC6\n"@/Library/Caches/com.apple.xbs/Sources/GPUDriversIntel/GPUDriversIntel-14.7.8/IONDRV/ICLLP/AppleIntelFramebuffer/AppleIntelController.cpp:5531
Backtrace (CPU 2), Frame : Return Address
0xffffff810febb970 : 0xffffff800151a65d mach_kernel : _handle_debugger_trap + 0x49d
0xffffff810febb9c0 : 0xffffff8001654a75 mach_kernel : _kdp_i386_trap + 0x155
0xffffff810febba00 : 0xffffff80016465fe mach_kernel : _kernel_trap + 0x4ee
0xffffff810febba50 : 0xffffff80014c0a40 mach_kernel : _return_from_trap + 0xe0
0xffffff810febba70 : 0xffffff8001519d27 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff810febbb70 : 0xffffff800151a117 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff810febbbc0 : 0xffffff8001cc1abc mach_kernel : _panic + 0x54
0xffffff810febbc30 : 0xffffff7f8611c09e com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11enableHWDC6Ev.cold.1
0xffffff810febbc40 : 0xffffff7f860cb635 com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9enableDC9Ev + 0x3b
0xffffff810febbc60 : 0xffffff7f860cb531 com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN31AppleIntelFramebufferController10setDCStateEb + 0x361
0xffffff810febbca0 : 0xffffff7f8609b0e2 com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN21AppleIntelFramebuffer24setFramebufferPowerStateEj + 0x224
0xffffff810febbcd0 : 0xffffff7f860b0b9f com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN21AppleIntelFramebuffer12setAttributeEjm + 0x1ad
0xffffff810febbd20 : 0xffffff7f860b0c6a com.apple.driver.AppleIntelICLLPGraphicsFramebuffer : __ZN21AppleIntelFramebuffer12setAttributeEjm + 0x278
0xffffff810febbd70 : 0xffffff7f85f47faa com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer14checkPowerWorkEj + 0x280
0xffffff810febbe10 : 0xffffff7f85f47d08 com.apple.iokit.IOGraphicsFamily : __ZN14IOFBController14checkPowerWorkEj + 0x9a
0xffffff810febbe40 : 0xffffff7f85f4eaeb com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer10systemWorkEP8OSObjectP22IOInterruptEventSourcei + 0x123
0xffffff810febbee0 : 0xffffff8001c2d54d mach_kernel : __ZN22IOInterruptEventSource12checkForWorkEv + 0x17d
0xffffff810febbf30 : 0xffffff8001c2be1e mach_kernel : __ZN10IOWorkLoop15runEventSourcesEv + 0x11e
0xffffff810febbf70 : 0xffffff8001c2b416 mach_kernel : __ZN10IOWorkLoop10threadMainEv + 0x36
0xffffff810febbfa0 : 0xffffff80014c013e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(576.1)[92A3DAC1-1745-37AC-88DE-FA87B5EB2526]@0xffffff7f85f3d000->0xffffff7f85f8dfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[DF219CC1-366A-31FC-B8ED-17C584BA2549]@0xffffff7f81f12000
         com.apple.driver.AppleIntelICLLPGraphicsFramebuffer(14.0.7)[18868C3D-C807-3435-BBD6-D95A2F4D2FA7]@0xffffff7f86084000->0xffffff7f86321fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[DF219CC1-366A-31FC-B8ED-17C584BA2549]@0xffffff7f81f12000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[68557A36-4EE1-372A-983B-BB2769FDB8E0]@0xffffff7f81f09000
            dependency: com.apple.iokit.IOAcceleratorFamily2(438.7.3)[9D052246-9911-3EB3-89E9-BDF771949C45]@0xffffff7f85fb6000
            dependency: com.apple.iokit.IOReportFamily(47)[8F7948CF-5C25-33F4-A687-67F8A5B7906E]@0xffffff7f81e49000
            dependency: com.apple.AppleGraphicsDeviceControl(5.2.6)[372B091D-3A52-3749-AE17-E8A5103D8DB0]@0xffffff7f8607a000
            dependency: com.apple.iokit.IOGraphicsFamily(576.1)[92A3DAC1-1745-37AC-88DE-FA87B5EB2526]@0xffffff7f85f3d000

BSD process name corresponding to current thread: kernel_task
Boot args: debug=0x100 keepsyms=1 chunklist-security-epoch=0 -chunklist-no-rev2-dev

Mac OS version:
19G2021

Kernel version:
Darwin Kernel Version 19.6.0: Thu Jun 18 20:49:00 PDT 2020; root:xnu-6153.141.1~1/RELEASE_X86_64
Kernel UUID: 1D3A0F3D-D908-397B-BD16-8F48C0823A2E
Kernel slide:     0x0000000001200000
Kernel text base: 0xffffff8001400000
__HIB  text base: 0xffffff8001300000
System model name: MacBookPro16,2 (Mac-5F9802EFE386AA28)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 486125505360

I saw that DC9 and DC6 are two states where the display goes when it goes to sleep... But i don't know what could be the problem...

Sign In

Hackintosh Guide - Install MacOS Catalina with Intel 10th Mobile Processors using OpenCore bootloader

Recommended Posts

rositaott

MaLd0n

rositaott

MaLd0n

rositaott

MaLd0n

rositaott

uncletonn

MaLd0n

rositaott

MaLd0n

uncletonn

MaLd0n

rositaott

MaLd0n

rositaott

MaLd0n

bss111

MaLd0n

Paolo7297

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity