Xeon ES + Z10PE-D16 WS

[50niggaz]

Very good to everyone

Well the thing is that I can not make the distro boot (Olarila Mojave), configuring the bios as it says a person who has the same motherboard and has managed to install without problems, my bios is in the latest version, but Kernel Panic almost always the moment I started to start the distro, I have come to think that it is because of the CPU that I have since it is an Engineering Sample ... I leave the specifications of the PC to see if anyone can help (Excuse me for my English, I used a translator)

Intel Xeon E5-2699v4 ES (QHUP)

ASUS Z10PE-D16 WS

128GB (4x32) DDR4 2400 ECC Samsung

RX Vega 64 8GB HBM2

NVMe Samsung 970 EVO 250GB

NVMe Samsung 950 PRO 256GB

Transcend SSD370 512GB

Apple BCM94360CD (Wifi+Bluetooth)

Thanks in advance...

[erroruser]

Olarila is not a distro but try these options in the drivers64uefi folder try add emuvariable with Aptiomemory 2. Aptiofixdrv + emuvariable 3. Aptiofix2drv +emuvariable 4. Aptiofix3drv+emuvariable

with bios some settings will need to be changed check over these

Load Optimized Defaults

If your CPU supports VT-d, disable it

If your system has CFG-Lock, disable it

If your system has Secure Boot Mode, disable it

Set OS Type to Other OS

If your system has IO SerialPort, disable it

Set XHCI Handoff to Enabled

[50niggaz]

Olarila is not a distro but try these options in the drivers64uefi folder try add emuvariable with Aptiomemory 2. Aptiofixdrv + emuvariable 3. Aptiofix2drv +emuvariable 4. Aptiofix3drv+emuvariable

with bios some settings will need to be changed check over these

Load Optimized Defaults

If your CPU supports VT-d, disable it

If your system has CFG-Lock, disable it

If your system has Secure Boot Mode, disable it

Set OS Type to Other OS

If your system has IO SerialPort, disable it

Set XHCI Handoff to Enabled

 

Thanx for the help!!

After 200 configurations of Bios, Niresh advances a lot in the boot, recognizes the Ethernet, NVMe, and others but stays here without jumping Kernel Panic ... I do not know what to do anymore ...

aluminum and sulfur

it's the farthest I've come

[erroruser]

niresh is junk use image from here https://Olarila.com/forum/viewtopic.php?f=50&t=8685

[erroruser]

you may need to use other drivers you can get from here https://Olarila.com/forum/viewtopic.php?f=80&t=8919

an use these combos Aptiomemory + emuvariable 2. Aptiofixdrv + emuvariable 3. Aptiofix2drv +emuvariable 4. Aptiofix3drv+emuvariable

[50niggaz]

Good again and thanks for the real help, I have tried everything you have told me, one by one, with the image of Olarila, but nothing, Kernel Panic. However I have done the same with the "Garbage" Niresh and load everything except that it is still in the same place of capture, I always use Olarila, but this time I'm giving a lot of trouble with this PC

[eric76]

this card works well with mojave 10.14.3