ssd is not selectable in installer

[monw2d]

as title said ssd is not selectable in installer or disk utility

 

 

i have attached my efi as well

ahci is enabled

thanks

EFI-usb.zip

[monw2d]

anyone?

[MaLd0n]

lga775? if yes u need a patch installer for it

http://dosdude1.com/software.html

[monw2d]

thanks i will try and report.

yes lga775, i want hfs+ will it work?

[monw2d]

another question.

i looked up the link. there is system definitions but no mac pro6.1.

is there a conflict with clover if my sys def is mac pro6.1 ?

witch one of these patches do i need and witch ones to avoid conflict with clover

sys def in bio. thanks

[monw2d]

it didnt boot in to installer. it was looping on 3 process to start

[onemanosx]

if you are doing post install prior to installing OS, that is not the correct way.

You are to install OS first then reboot to DosDude1 installer and do the necessary Post installation.

Pretty sure you'll need to have a working Clover to boot dosdude1 as his installer is meant for real macs and does not contain clover bootloader.

[monw2d]

ok i understand that but thing is i have working clover to get the installer going. dosdude1 have stuck with 3 proccess to start and stop.

i have found another way to install mojave, but now it says cpu not supported.

patched th telemetry.plugin still same

[monw2d]

witch system def i choose to patch

[monw2d]

help

it doesnt boot

https://mega.nz/#!C35imYoS!dwdudLWjYyQiXnicjlW7ed_rlll5mdsu0RYCgWfAC8o

sorry it says file too large here

[MaLd0n]

u need use a AHCI patch

[monw2d]

thanks patch worked.

sorry @MaLd0n for asking this much, never had this many miss matches with hackintosh

i have another problem with gpu

only boots to desktop with SAFE mode

and second display is pink

HDMI to VGA working

DVI to HDMI to VGA shows pink in mojave / sierra works fine

i have tried 3 smbios`s macpro6 - imac14.2 - imac 18.3 ., still same

3 contigs.zip

[erroruser]

maybe try imac 14,1

[monw2d]

maybe try imac 14,1

 

didnt work

without safe mode i get this

black screen first monitor / flashing pink on second

video

https://mega.nz/embed#!37533Y5J!H8KasGqRmFYbH90wjDOLVHbWWEsXDxE3zPU89KaPgyg

[monw2d]

any help?

[MaLd0n]

[ref]monw2d[/ref], RX560 work in legacy? i think no

[monw2d]

[ref]monw2d[/ref], RX560 work in legacy? i think no

yes it does. even in 3d apps and 3d gpu render

can you please help me figure this out

Edited February 14, 2019 by Guest

[monw2d]

i have made some progress.

fresh install +cpu patch

clover 4769

replaced fakesmc with virtualsmc

and auto login ON

successfull boot to desktop but its laggy and second monitor is still pink

currently googling patch vbios

update: different imac sysdef i have tried 14.2 - 17.1 - 18.1 - 18.3 - all black screen

only on macpro6 i have boot to desktop

in text below "Radeon" framebuffer is injected. just testing. it boots without injecting framebuffer

kiks-Mac-Pro:~ kik$ ioreg | grep ATY

| | | | +-o ATY,AMD,RadeonFramebuffer@0

| | | | +-o ATY,AMD,RadeonFramebuffer@1

| | | | +-o ATY,AMD,RadeonFramebuffer@2

kiks-Mac-Pro:~ kik$ ioreg | grep AMD

| | | | +-o AMD9500ControllerWrangler

| | | | +-o AMDSupport

| | | | +-o AMDRadeonX4000_AMDRadeonHWServicesPolaris

| | | | | +-o AMDRadeonX4000_AMDRadeonHWLibs

| | | | +-o AMD9500Controller

| | | | +-o ATY,AMD,RadeonFramebuffer@0

| | | | | +-o AMDFramebufferVIB

| | | | +-o ATY,AMD,RadeonFramebuffer@1

| | | | | +-o AMDFramebufferVIB

| | | | +-o ATY,AMD,RadeonFramebuffer@2

| | | | | +-o AMDFramebufferVIB

kiks-Mac-Pro:~ kik$ /code]

[monw2d]