[Guide] Hardware Encoder / Hardware Decoder / Video Processing / HEVC Support / Intel Quick Sync

[erghezi]

Hi Daniel,

I followed your tutorial but I get this error for my i9 9900k :

Here is my send me file:

https://drive.google.com/file/d/1y1YKgl39i83Wbyg5ImY3FuqN1BHoy4rn/view?usp=sharing

What is the problem?

Thanks

[MaLd0n]

[ref]erghezi[/ref], use Olarila clover folder serie 300 with my dsdt, only it

DSDT.aml.zip

[erghezi]

Hi,

I replaced clover folder from : https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

Still no go

Here is my full clover folder:

https://drive.google.com/file/d/19n8RSdY_lmTs4iWsZr0LunNnCyhYZCBg/view

[MaLd0n]

[ref]erghezi[/ref], post one full dump

--Run_Me

RunMe.app

[erghezi]

Dear Daniel,

Here it is,

Please kindly check, Thanks

https://drive.google.com/open?id=1qjP64RVwI77UYJXm4dbQVgvudkJwGdMm

[MaLd0n]

[ref]erghezi[/ref], no idea what happen, intel accel is loaded

[jibinpanji]

shutdown not working, instead it reboots.

tried to attach "sendme" file, but i get error : file too large.

Pls help..

thanks.

[Najr4d]

MaLd0n... you have done me a super DSDT working perfect with Mojave (iGPU + dGPU) equipment worked as it should. I have a problem on Catalina under FCPX. As I use DSDT, ti iGPU works at 30% - up to 0.35GHz maximum and exporting goes much slower than on Mojave. I can't run RunMe even though I watched your tutorial. Can you improve DSDT for me? Now UHD630 no longer needs FakeID, it goes without ig_platform_id, and in my old configuration I still have it injected. With the new WEG 1.3.4 you have to add:

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
           <dict>
               <key>AAPL,ig-platform-id</key>
               <data>
               AwCYPg==
               </data>
               <key>AAPL,slot-name</key>
               <string>Internal@0,2,0</string>
               <key>device_type</key>
               <string>Display controller</string>
               <key>hda-gfx</key>
               <string>onboard-2</string>
               <key>model</key>
               <string>Intel UHD Graphics 630 (Desktop 9 Series)</string>
           </dict>
<key>PciRoot(0x0)/Pci(0x1f,0x3)</key>
           <dict>
               <key>AAPL,slot-name</key>
               <string>Internal@0,31,3</string>
               <key>device_type</key>
               <string>Audio device</string>
               <key>layout-id</key>
               <data>
               AQAAAA==
               </data>
               <key>model</key>
               <string>Cannon Lake PCH cAVS</string>
           </dict>

for the wake up to work under 10.15.1.

If I remove DSDT, iGPU works at 1.20GHz and export from FCPX goes very fast, but I have glitches in the film.

Could you make a new DSDT using the old "DSDT" which I attach in the attachment? I care about iMac2019 because of software licenses, because on iMacPro everything works, without glitchy and ... without iGPU :)I can't add my old "SendMe" because the file is too big it is here:https://Olarila.com/forum/viewtopic.php?f=62&t=7164&start=160 last post on this page.I will wait for good news

DSDT.aml.zip

[MaLd0n]

[ref]Najr4d[/ref], dsdt is same, i think is a bug, compare time

[Najr4d]

hmm ... when I use DSDT, iGPU works on 1/3 of its power. As soon as I remove DSDT, iGPU works 100%, but the movie has glitch.

[MaLd0n]

[ref]Najr4d[/ref], no idea what happens, nothing in dsdt about it

[Najr4d]

can i use this DSDT on iMacPro 2017 identification with iGPU disabled? Do you still need XHCI-unsupported.kext and EFICheckDisabler.kext in Catalina?

[MaLd0n]

[ref]Najr4d[/ref], same config for all system

[MaLd0n]

-Update first post with new way WEG 1.3.6

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

[rajkhand]

my system is GA 370N wifi motherboard, i7-8700K CPU, GA RX-570 4GB, Catalina 10.15.2

with your latest whatevergreen and lilu

What SMBIO?

In Devices/Properties what setting for Platform Id, intelgfx?

Should I check injectIntel? and boot argument Shikivga=60?

At present I am using imacpro1,1, disabled iGPU in BIOS, ShikiVGA=16, latest whatevergreen 1.3.6, lilu 1.4.0 and No entry in Device/Properties

everything works like Safari playing Netflix and Amazon prime, TV+ app playing content, HEVEC H265 working using RX 570 BUT H264 not working though videoproc says both 264/265 enabled at time of encoding h264 it gives error in log file that videotoolbox cannot be initialised also in handbrake if I select h264 Videotoolbox codec will not encode.

Thanks

[MaLd0n]

[ref]rajkhand[/ref], use iMac19,2 smbios with shikigva=128 with no igpu enable

[rajkhand]

With imac19,2 nothing works used you whatevergreen and Lilu and Shikivga=128, iGPU disabled in BIOS

videoproc both NO

Hackintool VDA Decoder Decoder fail

[MaLd0n]

[ref]rajkhand[/ref], try with iMac19,1, work very good

[rajkhand]

In past I tried also with 19,1 with iGpu enabled in BIOS and with headless ig platform id and every thing worked except H264 and Netflix and Amazon Prime playing in Safari. But I have not tried with the latest whatevergreen and lilu.

Why iGpu should be disabled in BIOS?

Can you please give me the values for Device/Properties etc.

Also with imacpro1,1 only H264 is not working any solution to that?

[MaLd0n]

[ref]rajkhand[/ref], if u use intelhd, dont need any device/properties now, just enable and weg kext work on it

[wastedbrain]

Hi there [ref]MaLd0n[/ref]!

First of, thanks for DSDT you sent me earlier. It fixed a good number of stuff.

I am currently testing the hackintosh with OBS and it appears encoding via gpu is not available. Do I need to implement this guide to my hackintosh to achieve this? Will it not distort/break the current working config I got from you?

[MaLd0n]

[ref]wastedbrain[/ref], Use weg kext from first post and add shikigva=128

ur processor don't have igpu, intel quick sync don't work

[wastedbrain]

[ref]MaLd0n[/ref], I cant find your instruction on how to implement that.

All I can think of is

step 1: I open config.plist with clover;

step 2: Copy Whatevergreen to the EFI/clover/kexts/other folder

step 3: ?

[MaLd0n]

[ref]wastedbrain[/ref], add shikigva=128 in bootargs

[wastedbrain]

[ref]MaLd0n[/ref],

I can't find a shikigva entry:

Added in 41 minutes 10 seconds:

Hmm....never thought I could just double click on the white space and type :S