asmar

Hi all, I bought a minisforum PC which has AMD ryzen 9 and the rest hardware specs as outlined in the link below: https://store.minisforum.com/products/minisforum-um790-pro I would like to ask if it is possible to install the latest MacOS and also if there is any relevant EFI that I can download and work on it instead of doing everything from the beginning. Thanks

@Nishant Pattani did you ever manage the bluetooth to work? I got the same model and tried a bunch of things without any luck.

I tried without any success. Maybe I'm doing something wrong but I have no clue how to troubleshoot this. I followed the following: https://github.com/corpnewt/USBMap everything works apart from bluetooth.

I'm not sure I understand what you want to say. Are you asking if the bluetooth is connected in USB? If yes, it is. Can you give me a few more details or a link to check what you are saying about usb remap?

Thank you @MaLd0n, you can download the file from this link.

I followed that link and its details without any luck. If you see my screenshot you will see the relevant keys that are already there.

Hi all, I'm trying to make this bluetooth usb to work without any luck. Here are what system reports: Bluetooth Controller: Address: NULL State: Off Chipset: BCM_4350C2 Discoverable: Off Firmware Version: v0 c0 Product ID: 0x0001 Supported Devices: 0x382039 < HFP AVRCP A2DP HID Braille AACP GATT Serial > Transport: USB Vendor ID: 0x004C (Apple) Attached is a screenshot of my kext files. Any help is more than welcome. Screenshot 2022-08-11 at 1.52.08 PM.zip

I removed some kexts and worked.

Hi all, I've got latest Opencore with all kext installed for audio but it doesn't work at all. It isn't listed under audio. I tried many id's (0, 1,2,3,5,7 etc as listed in opencore) for the Realtek 892 which seems to have my motherboard without any luck. In this link you can check all the details via the Runme.app Any help is very much appreciated.

@MaLd0n thanks for the reply. Is there a way (url etc) that I can check if it will be supported in the near future? The laptop suppose to have 2 cards, the second is nvidia. Correct me if I'm not wrong but is there a way to make it work with it? In the BIOS there isn't any option to switch or disable the Intel. Thanks

Hi all, Can someone please give me some help before I start digging into it if it will be able to run Hackintosh on the above laptop? Below you can find the output from the lspci command (has Linux installed at the moment) 00:00.0 Host bridge: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers (rev 01) 00:02.0 VGA compatible controller: Intel Corporation TigerLake GT2 [Iris Xe Graphics] (rev 01) 00:04.0 Signal processing controller: Intel Corporation TigerLake-LP Dynamic Tuning Processor Participant (rev 01) 00:06.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe Controller (rev 01) 00:07.0 PCI bridge: Intel Corporation Tiger Lake-LP Thunderbolt 4 PCI Express Root Port #3 (rev 01) 00:0a.0 Signal processing controller: Intel Corporation Tiger Lake-LP Telemetry Aggregator (rev 01) 00:0d.0 USB controller: Intel Corporation Tiger Lake-LP Thunderbolt 4 USB Controller (rev 01) 00:0d.3 USB controller: Intel Corporation Tiger Lake-LP Thunderbolt 4 NHI #1 (rev 01) 00:12.0 Serial controller: Intel Corporation Tiger Lake-LP Integrated Sensor Hub (rev 20) 00:14.0 USB controller: Intel Corporation Tiger Lake-LP USB 3.2 Gen 2x1 xHCI Host Controller (rev 20) 00:14.2 RAM memory: Intel Corporation Tiger Lake-LP Shared SRAM (rev 20) 00:14.3 Network controller: Intel Corporation Wi-Fi 6 AX201 (rev 20) 00:15.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #0 (rev 20) 00:16.0 Communication controller: Intel Corporation Tiger Lake-LP Management Engine Interface (rev 20) 00:1c.0 PCI bridge: Intel Corporation Device a0bb (rev 20) 00:1d.0 PCI bridge: Intel Corporation Tiger Lake-LP PCI Express Root Port #9 (rev 20) 00:1f.0 ISA bridge: Intel Corporation Tiger Lake-LP LPC Controller (rev 20) 00:1f.3 Multimedia audio controller: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20) 00:1f.4 SMBus: Intel Corporation Tiger Lake-LP SMBus Controller (rev 20) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP SPI Controller (rev 20) 01:00.0 3D controller: NVIDIA Corporation TU117M [GeForce MX450] (rev a1) 2c:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) 2d:00.0 Non-Volatile memory controller: SK hynix Device 174a

I did the what you suggested but the problem is the same. I did some modifications to my EFI since the initial post (not related with ethernet) but just in case I'm attaching it again for a reference. Speed doesn't go higher than 100-120kb/sec and at some point they go down to 0-10kb/sec. This problem drives me nuts.... Thanks EFI.zip

Hi all, I've installed successfully Big Sur on the Gigabyte Z370 HD3 (bios 14b).Everything works fine apart from ethernet and more specific the speed of it.It doesn't get speeds above 100kb/sec. Of course it doesn't have to do with my router etc as I it works fine on other OS.I tried so far the following kext (adding/removing each one each time)1. IntelMausi2. IntelMausiEthernetAttached you can find my EFI folder.Any help is very much appreciated. EFI.zip

It doesn't work too. It moved further and freeze. One of the last errors is "AppleNVME assert failed"

Thanks for the update. You can download the EFI folder from this link.

How can I identify which is it as I haven't add any extra kext, only copy-paste from the downloads page.

Please correct me if I did anything wrong from the procedure below. I've got already Catalina latest running fine in my PC. I download & burn the olarilla image. Then replaced the EFI folder of the usb stick which is the installation media with the EFI folder from the downloads (EFI Clover Serie 300.400) for my motherboard (i5 8th gen -- coffee lake). I've also replaced the config (config.SERIE 300 and 400) inside the EFI/CLOVER/. During boot it hands straight away with a kernel panic and among others: "Can't perform kext scan....in memory panic stackshot...." Any help if very much appreciated.

Hi all, I've got a Catalina installed and want to upgrade to Big Sur. All previous versions were working fine by just selecting upgrade via the system preferences - software updates. Regarding the Big Sur, once I downloaded from the software updates, it started the installation but once it reboots the machine it doesn't create to the clover any link to click to continue the installation and it boots back to Catalina. What am I missing? Thanks in advance

Hi, This is my log file generated from the Runme.app zip file download

I've installed every singe wifi kext from there and it doesn't work. It doesn't show the wifi interface at all.

Hi all, I've installed many kext regarding wifi usb cards but none worked. I've got an Airlink wireless-n usb adpater model WN7 10NP which can't find anywhere internet what bloody chipset is using. The dmesg throws: 019940.387569 AppleUSB20HubPort@14420000: AppleUSBHostPort::interruptOccurred: overcurrent detected with port status 0x4000, localSimulatedInterrupts = 0x0 handle_get_purgeable_stats:8636: total purgeable file count: 36 total purgeable size: 618496 019945.494670 AppleUSB20HubPort@14420000: AppleUSBHostPort::interruptOccurred: overcurrent detected with port status 0x4000, localSimulatedInterrupts = 0x0 How can I find what chipset is using? Any help is very much appreciated.

Hi all, I've got in place: -Kabylake and Coffeelake(8 Gen) IntelGFX 0x59128086 ig-platform-id 0x59120003 Check InjectIntel but acceleration doesn't work. My PC has: CPU: Intel Core i5 8500 1151/3GHz (coffee lake) Motherboard: Gigabyte Z370 HD3 1151/Z370 Graphics: ATI Radeon RX 560 4GB My EFI folder can be downloaded from: https://easyupload.io/ygik4n Any help is very much appreciated.

Hi all and Merry Christmas, I'm using the last couple of months a desktop with Olarilla Catalina which works out of the box superb without even modifications on BIOS etc. I've just updated to latest BIOS, upgrade the firmware on one NVMe drive and that's all. Occasionally I've updated the latest kext and everything works perfectly. Now my question; is there a list with laptops that working out of the box (adding some kexts is fine)? If anyone has any that works great I will really appreciate if you can post your exact model here. Thanks

Hi all, Any ideas why it kept rebooting my system when I click update now (downloaded the 10.15.2) but the update isn't installed. Wherever I go to the software update panel it keeps showing the Update now. Thanks

May I ask how I can delete the sensors kext when I can't boot into the OS? I've got the same problem as the initial post. Thanks