onemanosx

[ref]Graissechel[/ref], Lets ponder upon this link to figure out your issue. https://github.com/coolstar/VoodooGPIO/blob/master/VoodooGPIO/CannonLake-H/VoodooGPIOCannonLakeH.hpp#L414 Added in 11 minutes 51 seconds: [ref]Graissechel[/ref], Try again DSDT-CA.aml.zip

[ref]comcomson[/ref], Can you boot to windows and check in device manager, look for the HID device and find its IRQ value? e.g https://imgur.com/aeXJRb9

[ref]shrisha[/ref], Interesting.. Anyway, 1. Use this utility for your web driver - https://github.com/Benjamin-Dobell/nvidia-update 2. Untick "inject-intel" and delete contents in "ig-platform-id" in config.plist See if that helps.

Nice! Upload new sendme, please.

[ref]Graissechel[/ref], Try this DSDT.aml.zip

Nope! Added in 35 minutes 37 seconds: [ref]iki[/ref], Still using voodooi2c+voodooi2cHID kexts. Try this. Rebuild sudo kextcache -i / and reboot. DSDT-528.aml.zip

[ref]shrisha[/ref], Run this app and upload sendme folder here http://Olarila.com/files/Utils/RunMe.app.zip]

1. nv_disable bootflag is to disable Nvidia driver from loading, why then do you install web driver? 2. When you mentioned intel and nvidia graphics switching, is this possible via bios or nvidia software in windows?

[ref]iki[/ref], Ok here goes one more before I take a break! I really need a reference read for your I2C error. Until, I have more info, I'll update again. DSDT-Pin.aml.zip

[ref]iki[/ref], try this one. DSDT-GPI0 Poll.aml.zip Added in 48 minutes 44 seconds: Relax Anyway, new files has different output than previous efforts. I need to step away from the desk now. Will update soon. kernel: (kernel) VoodooGPIOCannonLakeLP::Loading GPIO Data for CannonLake-LP kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Init! kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 0 kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 1 kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 2 kernel: (kernel) VoodooGPIOCannonLakeLP::GPIO Controller is already awake! Not reinitializing. kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0 kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation kernel: (kernel) VoodooI2CControllerNub::pci8086,9de8 SSCN not implemented in ACPI tables kernel: (kernel) VoodooI2CControllerNub::pci8086,9de8 FMCN not implemented in ACPI tables kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Warning: Error getting bus config, using defaults where necessary kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Publishing device nubs kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found I2C device: MSFT0001 kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Could not find or evaluate _CRS method kernel: (kernel) VoodooI2CControllerDriver::TPD0 Could not get device resources kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Could not initialise nub for MSFT0001

Yes, that is unfortunate. If its not working in polling mode, interrupt mode wont work either. Please visit voodooi2c gitter for an extra hand.

[ref]Graissechel[/ref], Try this. DSDT-GPI0.aml.zip

Similar laptop? Wow.. that guide is not so much of a guide LOL

[ref]Graissechel[/ref], In case you are curious previous attempts are to eliminate SSCN FMCN Acpi errors and were resolved successfully. kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Starting I2C controller kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Starting I2C controller kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Set PCI power state D0 kernel: (kernel) VoodooI2CPCIController::pci8086,a368 Publishing nub kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Probing controller kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Found valid Synopsys component, continuing with initialisation kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Set PCI power state D0 kernel: (kernel) VoodooI2CPCIController::pci8086,a369 Publishing nub kernel: (kernel) VoodooI2CControllerDriver::pci8086,a368 Got bus configuration values This next one is trying to implement polling mode with zero GPI0 DSDT-SBFB.aml.zip

[ref]iki[/ref], The latest DSDT reports the below which I have not encountered. I will require to do more reading about this issue. My suspicion is at the ACPI table error "\_SB.PCI0.I2C0.TPD0._DSM" Let me know if you have found something similar and link me up to that article. kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0 kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Got bus configuration values kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found I2C device: ELAN0608 kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x57 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode. kernel: (AppleACPIPlatform) ACPI Warning: \_SB.PCI0.I2C0.TPD0._DSM: kernel: (AppleACPIPlatform) ACPI Warning: \_SB.PCI0.I2C0.TPD0._DSM: kernel: (AppleACPIPlatform) Argument #4 type mismatch - Found [integer], ACPI requires [Package] kernel: (AppleACPIPlatform) Argument #4 type mismatch - Found [integer], ACPI requires [Package] kernel: (AppleACPIPlatform) (20160930/nsarguments-169) kernel: (AppleACPIPlatform) (20160930/nsarguments-169) kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 I2C Transaction error details kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 lost arbitration kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 I2C Transaction error: 0x01001000 - aborting kernel: (kernel) VoodooI2CHIDDevice::ELAN0608 Request for HID descriptor failed kernel: (kernel) VoodooI2CHIDDevice::ELAN0608 Could not get HID descriptor

[ref]Graissechel[/ref], Another error to solve DSDT-ustp.aml.zip

[ref]iki[/ref], I am troubleshoting one error at a time DSDT-SSCN-017.aml.zip New send me please.

[ref]Graissechel[/ref], I am eliminating one error at a time Try this and upload new SendMe. DSDT-SSCN.aml.zip

[ref]iki[/ref], Try and upload new send me. DSDT-poll.aml.zip

Upload new SendMe with the patch

I looked at your IOREG before I give comment https://imgur.com/2Wxi5dD Try this and upload new send me DSDT-polling.aml.zip

Your touchpad is Elan1300 and that guide is correct as you already had voodooI2C + voodooI2cHID kexts installed.

[ref]yanotnubie[/ref], press spacebar and select block kext at options read here https://Olarila.com/forum/viewtopic.php?t=9317

Thanks for trying

Thats the issue. Normally, polling mode will run but unfortunately not for your device. This is the last kernel log. kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Starting I2C controller kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0 kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Got bus configuration values kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Publishing device nubs kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found I2C device: MSFT0001 kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x33 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode. However, I still have 3 tricks left. DSDT-16.aml.zip DSDT-15.aml.zip DSDT-14.aml.zip