mhmyasser

here is my log https://www.transfernow.net/dl/20230415yhLIzl4D

here is my log https://www.transfernow.net/dl/20230415yhLIzl4D

THX for UR WORKSend me Mahmouds-iMac.zip

Sorry for my bad English. that thing happen to me once, to fix it i booted in high sierra and launch the installation and it's done

Hi, i have a gigabyte B360N WIFI which has a built in WiFi adapter on a m2 slot i was asking if i can replace this with a one which working out of the box or if i can get this one working

thanks, i have 2 questions - can i use any of my WIFI as a real wifi for my build ? - if i upgraded to 10.14 will i need any modifications ?

hi, i can't find my board MAC OSX 10.13.6 Olarila image and replaced the "EFI folder" with Olarilas 300 folder i worked on some things on the system so here my spec: MOBO: Gigabyte B360n WIFI CPU : Intel Core i3-8100 Processor (6M Cache, 3.60 GHz) Ram : VENGEANCE® LPX 8GB (1 x 8GB) DDR4 DRAM 2400MHz CL16 VGA : PowerColor Red Dragon Radeon RX 580 8GB GDDR5 HDD: 1X SSD Transcend 64 GB 2.5" SATA III SSD320 "MAC" "SATA Port 0" ---- 1X XPG SX6000 128GB M.2 Solid State Drive "Windows 10" "M2 port" ---- 1X Seagate Barracuda ST1000DM010 - hard drive - 1 TB - SATA 6Gb/s "SATA Port 1" WIFI : 1X Intel built in ac 9650 wifi " not working at all ---- 1X USB Realtek AC 8812 "working for internet only by the loaded kexts and not discovered as a wifi card in system" The "send me" file attached thanks, Send me Mahmouds-iMac.zip

that's the way i got my OLD Z600 working with High Sierra Z600 Specification : -Dual Xeon L5640 12M Cache, 2.26 GHz, 5.86 GT/s Intel® QPI - 24.03 GB 1333 MHz DDR3 Reg ECC -1 SSD 64GB - 2 X 250GB WD Blue in RAID 1- bios : Storage > Storage Options - Removal Media Boot = Enable - Legacy Diskette Write = Enable - SATA Emulation = RAID+AHCI Security > System Security - Data Execution Prevention = Enable - Virtualization (VTx) = Disable - Virtualization (VT-d2) = Disable - AES Instruction = Enable Security > Device Security - Serial port = Hidden - Internal USB = Hidden - SAS Controller = Hidden - Legacy Diskette = Hidden - Embedded Security = Hidden Power > OS Power Management - Runtime Power Man = Enable - MWAIT-Aware OS = Enable - Idle Power savings = Extended - ACPI S3 Hard Disk = Disable - ACPI S3 PS2 Mouse = Enable - USB Wake = Disable - Unique Sleep State = Disable Power > Hardware Power Management - SATA Power Manage = Enable - Intel Turbo Boost = Enable - Enhanced Intel Turbo Boost = Enable - EUP Compliance = Enable Advanced > Processor - Hyper-Threading = Enable - Active Cores = All Cores - Limited CPUID = Disable Advanced > Chipset/Memory - PCI SERR# Generation = Disable - PCI VGA Palette Snooping = Disable Advanced > Device Options - Num Lock = Off - S5 Wake on LAN = Enable - Multi-Processor = Enable - Internal Speaker = Disable - Monitor Tracking = Disable - NIC PXE = Disable - SATA RAID Option ROM = Enable 2: installation media - download high sierra from the App store - use Install Disk Creator - use Clover EFI bootloader and choose your usb as a target 3: kexts - move the kext to other folder in the clover efi folder - kexts i used FakeSMC.kext NullCPUPowerManagement.kext . AHCIportinjector.kext . IOAHCIBlockStorageInjector.kext for audio i used AppleALC.kext . Lilu.kext only use -V while installing and after that i didn't use any boot flages and no clover modification only use inject Nvidia my Amd gpu always leads to panic and i can't fix it "Sapphire HD 7770 GHZ edition" so i installed an old gpu Nvidia 210 and it worked nicely so i'll move my Quadro 4000 to this system **** thats all