oldman20

tthank, i keep it to backup solution

Your specs? And i guess you passed preinstall step? I don’t have issue with running OCLP

Done ✅

Is EFI folder updated include for Ventura Broadwell?

this section for PCI-e slot right?

attached file previous post, thank!

thank @MaLd0n, just "use default olarila efi folder" without modify anything for my CPU? Here it is: https://drive.google.com/file/d/1jjaYiC5Bp40w_jLu58qkRz96s3diQVgr/view?usp=sharing RunMe-Output.txt.zip

after tried many times, still not working I followed voodooi2c guide carefully: correct my ACPI ID is TPD1, and know my CPU is Broadwell no need GPI0 controller patch, and I2C Controller Patches? Windows Emulation patch will done with SSDT-XOSI.aml Look at IOInterruptSpecifiers to know the hexadecimal APIC pin number is 0x1e mean 30 in decimal, less than 47, then can proceed to install kexts. But at Step Ensure I2C Serial bus name is correctly labelled, I not sure about it. Here is original method from DSDT: _SB.PCI0.I2C1.TPD1: Device (TPD1) { Name (_ADR, One) // _ADR: Address Method (_HID, 0, NotSerialized) // _HID: Hardware ID { If (LEqual (RDGI (0x35), One)) { Return (0xB0068C11) } Else { Return (0xAF068C11) } } Name (_CID, "PNP0C50") // _CID: Compatible ID Name (_UID, One) // _UID: Unique ID Name (_S0W, 0x04) // _S0W: S0 Device Wake State Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */)) { If (LEqual (Arg2, Zero)) { If (LEqual (Arg1, One)) { Return (Buffer (One) { 0x03 }) } Else { Return (Buffer (One) { 0x00 }) } } If (LEqual (Arg2, One)) { Return (0x20) } } Else { Return (Buffer (One) { 0x00 }) } Return (Zero) } Method (_STA, 0, NotSerialized) // _STA: Status { If (LEqual (And (SDS1, 0x08), 0x08)) { Return (0x0F) } Else { Return (Zero) } } Method (_CRS, 0, Serialized) // _CRS: Current Resource Settings { Name (SBFI, ResourceTemplate () { I2cSerialBusV2 (0x002C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C1", 0x00, ResourceConsumer, , Exclusive, ) Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, _Y2A) { 0x0000001E, } }) If (LEqual (GR13, One)) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL3) // _INT: Interrupts Store (0x1B, VAL3) } If (LOr (LOr (LEqual (BID, 0x80), LEqual (BID, 0x82)), LEqual (BID, 0x83))) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL4) // _INT: Interrupts Store (0x1A, VAL4) } Return (SBFI) } } I renamed SBFI to SBFB and remove: Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, _Y2A) { 0x0000001E, } But can't compile, so I removed these too: }) If (LEqual (GR13, One)) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL3) // _INT: Interrupts Store (0x1B, VAL3) } If (LOr (LOr (LEqual (BID, 0x80), LEqual (BID, 0x82)), LEqual (BID, 0x83))) { CreateDwordField (SBFI, \_SB.PCI0.I2C1.TPD1._CRS._Y2A._INT, VAL4) // _INT: Interrupts Store (0x1A, VAL4) } Then compiled SSDT-TPD1.aml success (below attached files), put this SSDT-TPD1.aml in OC/ACPI and add to config.plist. Reboot and nothing change Trackpad work like mouse, but Trackpad setting not show in system preferences, and nothing advance setting for trackpad in BIOS. Battery status + brighter slide working well In IOReg, TPD1 show Interrupt mode is APIC, and can't see GPI0 - which I understand no need for Broadwell CPU right? What were I missing? thank and regards! With-SSDT-TPD1.ioreg Without-SSDT-TPD1.ioreg SSDT-TPD1.aml.zip

I done with linux supported and nice The Helper!

Scope (_SB.PCI0) { Device (SDMA) { Method (_STA, 0, NotSerialized) // _STA: Status { If (LEqual (SMD0, 0x02)) { Return (0x0F) } If (LEqual (SMD0, Zero)) { Return (Zero) } If (LLess (OSYS, 0x07DD)) { LPD3 (SB10, SMD0) Return (Zero) } Return (0x0F) } } } I tried all my best but cant pass this, any suggest? thank so much

what's about my case, Ad?

Anyone get blank screen no Clover GUI when has ApfsDriverLoader.efi and/or HFSPlus.efi in EFI\Clover\drivers\UEFI? It boot normal if load ApfsDriverLoader.efi manual in efi shell? Im running Clover 5148 latest version I tried AppleAPFS.efi instead and just blank darkscreen like other APFS efi i have Please see my attached screenshot below Here Prelboot.log when boot from Clover until show GUI then press F2: prelog.txt.zip And this is log after load manual by hand APFSDriverLoader.efi in root USB: just boot into hackintosh normal Load APFS+HFS manual in EFIShell.txt.zip And the last: freezer blank blackscreen when add your AppleAPFS.efi in EFI/Clover/drivers/UEFI BlankScreen-CloverGUI.txt.zip BeforeLoadAPFSManual AfterLoadAPFSManual_F3 AfterLoadAPFSManual

Olarila refi folder for Broadwell notebook has SMCBattery plugin inside VirtualSMC, but still so detail like ACPIBatteryManager Olarila efi folder: ACPIBatteryManager:

sr, that screenshot is missing, i already delete ACPIBatteryManager, used SMCBatteryManager and VirtualSMC for that

Hi MaLd0n my ACPI EC registers 8 bit OperationRegion (ECOR, EmbeddedControl, Zero, 0xFF) Field (ECOR, ByteAcc, Lock, Preserve) { EC00, 8, EC01, 8, EC02, 8, EC03, 8, EC04, 8, EC05, 8, EC06, 8, EC07, 8, EC08, 8, EC09, 8, EC10, 8, EC11, 8, EC12, 8, EC13, 8, EC14, 8, EC15, 8, EC16, 8, EC17, 8, EC18, 8, EC19, 8, EC20, 8, EC21, 8, EC22, 8, EC23, 8, EC24, 8, EC25, 8, EC26, 8, EC27, 8, EC28, 8, EC29, 8, EC30, 8, EC31, 8, EC32, 8, EC33, 8, EC34, 8, EC35, 8, EC36, 8, EC37, 8, EC38, 8, EC39, 8, EC40, 8, EC41, 8, EC42, 8, EC43, 8, EC44, 8, EC45, 8, EC46, 8, EC47, 8, EC48, 8, EC49, 8 } Battery status and info power in system report fine with ACPIBatteryManager.kext 1.90.1 (latest) But when I tried replace ACPIBatteryManager.kext with ECEnabler.kext + SMCBatteryManager.kext + VirtualSMC.kext, Battery status and info power in system info gone I checked kexts loaded and missing SMCBattery, don’t know why? % kextstat| grep -i -e Lilu -e ECEnabler -e SMCBattery Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release 48 7 0 0x2f000 0x2f000 as.vit9696.Lilu (1.6.1) 7FE96C72-5555-3D86-BA9C-36D9177168FB <8 6 5 3 2 1> 53 0 0 0x8000 0x8000 com.1Revenger1.ECEnabler (1.0.3) 8C5BDAE0-6618-3F41-B0DC-B9A07648A117 <48 8 6 5 3 2 1>

Hello MaLd0n could you please spare some time to make one for me. Thank you. https://drive.google.com/file/d/1XZQ5lAQt22UQUpLwjXodWqgOVNUgMuro/view?usp=sharing RunMe-Output |||||||||||||||||||||||| *----------------------* Welcome chuctran *----------------------* |||||||||||||||||||||||| *----------------------* -----Send Me Files------ *----------------------* |||||||||||||||||||||||| ********************************************************************************** Run .app and wait! Please don't touch your computer until the program is finished. ********************************************************************************** **************************************************************************************************** Small donations via PayPal for build, patches and guides development would be extremely appreciated. **************************************************************************************************** Kextstat... Pmset Log... Xcpm Log... ACPI tables... Kextload Log... Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release AudioDeviceName... VDADecoder Checker... ig-platform-id Log... Ioreg Log... Bootargs Log... Kernel Version... Audio Codecs... Kernel Log... System Version... Full Kextstat Log... Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release Cpu Log... IOBuiltin Log... Boot Log... Clover files (need administrator privileges) Mounted EFI at /Volumes/ESP cp: /Volumes/ESP/EFI/CLOVER: No such file or directory Removing theme dir. Removing tools dir. Masking your System IDs Dumped CLOVER files. Removing Resources dir. Removing Tools dir. Masking your System IDs Dumped OC files. Unmounted /Volumes/ESP Generating system info, this may take a while. Saving IOReg... 0:80: execution error: Traceback (most recent call last): File "./tccutil.py", line 354, in <module> main() File "./tccutil.py", line 341, in main insert_client(item) File "./tccutil.py", line 232, in insert_client open_database() File "./tccutil.py", line 130, in open_database conn = sqlite3.connect(tcc_db) sqlite3.DatabaseError: authorization denied (1)

The above error is easy to fix. Navigate to the VoodooPS2ControllerR6/contents/Plugins/ There are 2 kexts, open info.plist from both plugins and change com.apple.iokit.IOHIDSystem to com.apple.iokit.IOHIDFamily under OSBundleLibraries (My case has only replace)

Would you help me patch DSDT? Thank so much! Result from Runme.app: https://easyupload.io/exo777 Dell Inspiron 3558 (UEFI) - Intel Core i5 (5th Gen) 5200U /2.20GHz - 8GB RAM DDR3L - Intel(R) HD Graphics 5500/ nVIDIA GeForce 920M - 1366x768 - Realtek ALC255 @ Intel Wildcat Point-LP PCH - High Definition Audio Controller [F0] - Intel(R) Dual Band Wireless-AC 3160 - Dell Touchpad /Synaptics - Samsung SSD 860 EVO 250GB (GPT) Bios Version: A21 (Latest) Currently, i cant enable sound and connect bluetooth, brighter slide not working! Boot with OpenCore 0.7.8 and Monterey 12.4 My hack cant boot with Clover, still find way to fix. Temporarily solution is put apfsdriverloader and hfs efi in root of USB boot Clover

thank so much Ad! support in new macOS version long time? maybe?

thank, both bluetooth? any idea if using BCM94360CS2 combo with adapter similiar picture above?

Hi all! My specs in below signature, I think will buy BCM94352HMB, but it not native and maybe drop in feature? I thinking buy BCM94360CS2 but it not mPCIe, so is it can working normal when decide use BCM94360CS2 combo with converter like this? is it possible? If not, any suggest? Many thank!

have you same machine?

hello here my log..thankshttps://www.mediafire.com/file/0jf756ejp1r0ixy/Send+me+Chucs-MacBookPro.zip/file

can I do that when booted with Clover bootloader? or must OpenCore? as I know OC guide not recommended include DSDT.aml in ACPI folder?

thank ad, looking amazing way!