mapomme

Hello, Thank you for your help. I have fixed the WiFi After a reboot or a shutdown, there is always a message saying the computer did not shutdown properly even if it did shutdown properly : do you know how I can fix?

Hello, I have successfully install macOS Catalina with Olarila OpenCore folder for AMD Laptop But WiFi is not working I have downloaded "AirportItlwm_v2.3.0_stable_Catalina" and added this to config.plist <dict> <key>Arch</key> <string>Any</string> <key>BundlePath</key> <string>AirportItlwm.kext</string> <key>Comment</key> <string>V2.3.0</string> <key>Enabled</key> <true/> <key>ExecutablePath</key> <string>Contents/MacOS/AirportItlwm</string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string></string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict> But the WiFi card is not present in Settings Thank you if you can help me 🙂

Hello, I have a desktop pc - Motherboard : AsRock H370M-itx - CPU : Intel Core i3 8100 - Graphic card : Intel UHD Graphics 630 - Memory : 16 Go DDR4 Corsair Vengeance - SSD : Nvme Samsung 980 500 Go I have installed macOS Sonoma and it was working I have updated to macOS Sequoia and it did not work I want to do a fresh installation of Sequoia I use the OpenCore folder from Olarila, the first part of the installation is working but then it is stuck in a boot loop. I don't know how to fix it. Thank you for your help.

Hello, I have a 2021 Asus RoG Zephyrus G14 laptop I currently have macOS Sonoma I want to install macOS Sequoia I took the OC folder that works with Sonoma For Sequoia, I updated OpenCore and I only use the Lilu, VirtualSMC and WhateverGreen kexts that are up to date I replaced the patches in the config.plist I put the patches that come from https://github.com/AMD-OSX/AMD_Vanilla When I boot on the macOS Sequoia USB key, the installer loads but it always ends with a Kernel Panic I don't know how to go further Thanks if you can help me. I have attached my OC folder OC.zip The laptop : AMD Ryzen 7 5800HS with Radeon Graphics NVidia GeForce RTX 3060 16 Go DDR4 SSD Nvme Kingston 4 To SNV2S400G Intel AX210 Wi-Fi 6E and Bluetooth card

Hello, This device properties section works with Ventura : <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>framebuffer-con2-pipe</key> <data>EgAAAA==</data> <key>framebuffer-unifiedmem</key> <data>AAAAgA==</data> <key>model</key> <string>UHD Graphics 630</string> <key>framebuffer-con1-busid</key> <data>AgAAAA==</data> <key>device-id</key> <data>mz4AAA==</data> <key>framebuffer-con1-pipe</key> <data>EgAAAA==</data> <key>framebuffer-con2-busid</key> <data>BAAAAA==</data> <key>framebuffer-con2-type</key> <data>AAgAAA==</data> <key>device_type</key> <string>VGA compatible controller</string> <key>hda-gfx</key> <string>onboard-1</string> <key>framebuffer-patch-enable</key> <data>AQAAAA==</data> <key>enable-hdmi20</key> <data>AQAAAA==</data> <key>framebuffer-con0-pipe</key> <data>EgAAAA==</data> <key>AAPL,slot-name</key> <string>Internal</string> <key>AAPL,ig-platform-id</key> <data>BwCbPg==</data> <key>framebuffer-con1-type</key> <data>AAgAAA==</data> <key>framebuffer-con2-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-enable</key> <data>AQAAAA==</data> <key>framebuffer-con0-enable</key> <data>AQAAAA==</data> </dict> What should I modify to make it work with Sonoma? Thank you for your help

Hello, I am trying to install macOS Sonoma on a desktop pc. Here are the specifications of the pc : Motherboard : AsRock H370M/ac mini ITX CPU : Intel Core i3 8100 Graphic card : Intel UHD 630 16 Go DDR4 Corsair Vengeance SSD NVMe Samsung 980 Pro Go I have succesfully installed macOS Sonoma with the OpenCore folder for Cofee Lake desktop with -igfxvesa argument. Now I want to enable graphic acceleration. I have removed -igfxvesa and changed the Mac model to iMac 19,1 and changed the DeviceProperties section from this tutorial But macOS Sonoma boot then there is a black screen Can you help me ?

Hello, There is still no graphics accelration with or without -igfxvesa Here is my OC folder, if you want to check OC.zip

Hello MaLd0n, Thank you again for your help. Here is my device properties section <key>DeviceProperties</key> <dict> <key>Add</key> <dict> <key>PciRoot(0x0)/Pci(0x17,0x0)</key> <dict> <key>compatible</key> <string>pci8086,a182</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>ig-platform-id</key> <data>0x19120000</data> </dict> </dict> <key>Delete</key> <dict/> </dict> macOS boot but there is still no graphic acceleration

Hello, I have added this to the config.plist <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,ig-platform-id</key> <data>0x19120000</data> <key>device-id</key> <data>16590000</data> <key>enable-hdmi20</key> <data>01000000</data> <key>framebuffer-fbmem</key> <data>00009000</data> <key>framebuffer-patch-enable</key> <data>01000000</data> <key>framebuffer-stolenmem</key> <data>00003001</data> <key>hda-gfx</key> <string>onboard-1</string> </dict> macOS boots but there is still no graphic acceleration

Hello MaLd0n, Thank you for your help. I have successfully installed macOS Sonoma. I have used the -igfxvesa argument and there is no graphics acceleration : how can I fix it?

Hello, Ok, thank you for your answer. I have tried your OpenCore folder fol SkyLake desktop with Big Sur and it stop at first boot on this screen :

Hello, I have a Lenovo ThinkCentre M700 Tiny and I want to install macOS on it Here are the specifications : CPU : Intel Core i5 6500T Gfx : Intel HD Graphics 530 Memory : 2 x 4 Go DDR4 A-Data Lan : Intel i219-V SSD M2 Sata WD Blue SA510 1 To HDD 2,5" Seagate ST200LM007 2 To Do you know which version of macOS it is possible to install? Thank you for your help

Hello, I have bought a new laptop. It is an Asus RoG Zephyrus G14 (GA401QM-HZ058T) I would like to know if it is possible to do a hackintosh with it. Here are the specs : CPU : AMD Ryzen 7 5800HS with AMD Radeon Graphics RAM : 16 Go DDR4 GPU : Nvidia GeForce RTX 3060 Wi-Fi : MediaTek Wi-Fi 6 MT7921 Bluetooth : MediaTek Bluetooth SSD NVMe : KIOXIA KXG60PNV2T04 2048 Go Thanks !

Hello, Every time I start the MacBook, it boots in recovery mode and ask me to "Activate the Mac" with the email adress of the previous owner, but I don't have this emal adress and its password : I think I need to do a hackintosh or find another way to activate it Will it break the Mac if I do a hackintosh?

Hello, I bought a 2020 MacBook Air 13 inch M1 and it has an iCloud password (I don't know it and the previous owner didn't tell me) It prevent me from reinstalling macOS Is it possible to install a hackintosh on this MacBook? So I could use macOS on it even if there is this iCloud password? Thanks for your help

Hello, Thank you for your interest These kexts work with your OpenCore folder. But they don't work with the OpenCore folder that I found on the Github repository. I didn't manage to make the graphic acceleration with your OC folder Graphic acceleration work with the OpenCore folder I have found on Github I would like to have both graphic accelration and bluetooth working I attached the config.plis that I have found on Github config.plist.zip

Hello, I have successfully installed macOC Ventura 13.2.1 on my desktop pc. I use OpenCore folder from this repository Motherboard : AsRock H370M/itx CPU : Intel Core i3 8100 iGPU Intel UHD 630 Memory : 16 Go DDR4 Corsair Vengeance SSD Samsung V-NAND SSD 970 EVO NVMe M.2 250 GB I have read this guide and installed these kexts for Bluetooth IntelBTPatcher IntelBluetoothFirmware BlueToolFixup But it does not work : I can activate Bluetooth in macOS settings but it does not search bluetooth devices. Help would be appreciated Thanks

Hello, Thank you Kernel for your link. Ventura works with graphic acceleration. but Bluetooth does not work : I can activate it but it does not search for devices so there is no device in the list, Can you help me? I have followed this guide

Ok. Thank you for your reply. Is there a graphics card equivalent to the GeForce GTX 1660 that works with macOS? The igpu is an Intel UHD 630 but I have had no success making it work : Can you help?

Hello, I have desktop pc with a PNY GeForce GTX 1660 SUPER 6Go. I have installed Ventura and it woks but there is no graphic acceleration. Is it possible to enable graphic acceleration with this graphic card? Thank you for your help The motherboard is an AsRock H370M-ITX The CPU is an Intel Core i3 8100 The SSD is a Samsung M2 Nvme 980 MZ-V8V500BW 500 Go RAM : Corsair Vengeance LPX 2666 MHz DDR4 16 Go

Hello, I have run the app one time, and the computer has rebooted two times but there is still the message For Bluetooth, I use these kexts : BlueToolFixup.kext IntelBluetoothFirmware.kext IntelBTPatcher.kext And I have added them to the config.plist with TextEdit. Thank you for your help

Hello, Thank you for your help I now use alcid=21 instead of alcid=11 and audio works. With Ventura 13.0.1, I use a previous version of wifi kext because with the latest version, the computer reboot when I connect to a wifi network. I have installed the Intel Bluetooth kexts from OpenIntelWireless on Github but then, macOS always says the computer does not shutdown properly. Do you know why there is these error message? Thank you for your work

Hello, I have a Lenovo Yoga X1 3rd Gen 2018. I have installed macOS Monterey and everything was working except Bluetooth. I have installed macOS Ventura 13.0.1 and everything was working execpt Bluetooth and audio. I have restored a macOS Monterey backup and now audio is not working. I have tried with the latest OpenCore release, with the latest Olarila OpenCore folder and with the OpenCore folder that I was using before and audio still don't work. With Ventura and Monterey, the audio seems to be detected in macOS system settings but there is no sound. I use latest AppleALC and boot arg : alcid=11 I don't understand why audio is not working. Any help would be appreciated. Thanks

Hello, I have used the OpenCore folder that works with Ventura Beta with the config.plist that worked with Monterey and trackpad and touchscreen works. But there is a kernel panic when shuting down. I have attached the config.plist file config.plist.zip