hoaug

Last month i was install macos on my laptop Lenovo Thinkpad T470S. My Laptop Specs: Processor and Chipset: Intel Core i5 6300u Graphics: Intel HD 520 Storage: SN530 RAM: 12 GB DDR4 1 x Synaptics SMBUS Trackpad + Trackpoint 1 x PS/2 Keyboard 1 x USB 3.0 card reader 3 x USB 3.0 type a ports 1 x TB3/USB C port 1 x HDMI port 1 x 3.5mm mic/headphone jack Dual Battery I have researched and learned that my Laptop has 2 batteries and I have learned a bit of ACPI code and patched SSDT-BATC. I use SSDT-BATC included with ECEnabler.kext and Battery works. everything works except battery I thought everything was fine but no. I realized that my battery is only taking half its capacity. My battery as far as I know it has ~4k4 mAh but the macos side only receives ~2k mAh. I have searched and patched a lot but the number still only stops at 1k8. With such a battery capacity, I cannot use it without a charger. help me please. I spent a month trying to fix my battery but failed. if not fix my battery is too low and can not be used without charging 24/24. I can't watch youtube (1920x1080) more than 30p, only about ~30p my laptop is out of battery.... i also used kext CPUFriend + CPUFriendFriend (with 800mhz ) because i think its CPU problem but NOT... I'm really helpless right now. please help me...thank you very much Here is my DSDT and SSDT i use for Battery ( work but with very small capacity ) i use SSDT-BATX.dsl without patch BAT0,1 to BATX because i just use it for fix battery 16,32 and 128 byte ( i dont use ECEnabler because its make my battery has been reported for maintenance - and still low capacity ) SSDT-BATC for Notify BAT0 and BAT1 ( i also have rename Patch ) SSDT-BATT.am. I found it on Oclittle github ( I don't know if it helpful or not ) And here is my EFI: https://drive.google.com/file/d/19fNSEdeseKGWO_skEzErd6cl-MeoM6s6/view?usp=drive_link THANK YOU VERY MUCH DSDT and SSDTs.zip

Hi everybody I'm a newbie who successfully installed macOS this morning. pretty luckily everything works fine except the trackpad. I cannot turn it on. I've spent this whole day learning Patch and trying to fix the trackpad but with no success. I really need your help My machine configuration: Dell G3 15 3500 Laptop CPU: i7-10750h - UHD630 GPU: Nvidia GTX 1650ti (Disabled with SSDT) MAIN: DELL (lastest bios) RAM: 16GB SSD: SK Hynix BC511 512GB Sound: ALC295 LAN: Killer E2500 WIFI: Intel (I forgot but it works fine) Trackpad: DELL09E1, I2C1.TPDA, I2CHID. i tried many kext, i used kext VoodooI2C+VoodooI2CHID but it doesn't work ( i tried alpsHID.kext but also not working ) . My battery is working fine. I tried to patch SSDT for trackpad but it seems I did something wrong Someone please help me, thank you very much.. below is my EFI, DSDT and ioreg copy. EFI: https://drive.google.com/file/d/12pWCQRr5B1FU2Wlg3he--gyAc41Zrp4F/view?usp=sharing ioreg: https://drive.google.com/file/d/1AZ9nf_OtEZV1Ga0qH8jnS9Ou1Ns3j7wC/view?usp=sharing and DSDT: DSDT.zip

hi everyone, I started installing macOS Ventura 13.3 on my PC and it was done after a few difficult days. My PC: CPU: E5-2696 v3 MAIN: HUANANZHI X99-F8 GPU: RX580 RAM: 64GB SSD: SN550 I thought it was complete but no. when i plug in my iphone i get an error: the iphone automatically disconnects, it keeps reconnecting and then disconnects from the computer again until i unplug it from the usb port. I have tried the following cases: - Map USB : I tried again and again - mapped the USB using USBToolbox + USBToolbox.kext (I'm pretty sure I've mapped my USB ports correctly and 100% correctly) - Bios Settings - USB Configuration: + Legacy USB Support = Enabled + XHCI-Handoff = Enabled + EHCI-Handoff = Enabled - Change the cable to plug the iphone with the computer (always USB -> Lightning) - Change iphone device * There is a strange thing here is that on the Windows side everything is normal. So I tried installing Parallels to emulate windows and oh my gosh, my iphone plugged in to my computer was fine. how strange. - My web cam has the same problem. After recording for a while, it will automatically disconnect - It seems that the problem only occurs with the device that needs power from the USB port to use it. Someone please give me a solution, I've been stuck for days but can't find the solution, I need to fix that error because I'm an iOS App Code Dev. Is it due to the main error?. Please help me, thank you very much. below is my EFI. ( EFI works flawlessly.except that connecting iphone to computer via usb port does not work) - I use FakeSMC.kext and its kexts because VirtualSMC.kext doesn't work on my machine (it gives me an unbootable error) https://drive.google.com/file/d/1hMXdLchZuF0-3zRy56QjAh8BwkKCRmyN/view?usp=sharing

Specs: CPU: E5-2699v3 x2 (DUAL) MAIN: X10dal-i SSD: SN750 500GB RAM: 64GB OS: Monterey (trying) i was trying install Monterey but i got this error, is there any way to fix it please? thank you so much! https://imgur.com/Nf3NsFf

i dont know why but i cant change theme for opencore no acpi althought i i changed builtin -> External and add OpenCanopy.efi

Hello, i was try install Monterey beta 5 in my PC but i got this error (My PC not support macos12 - i was fake it to iMac16,1)