SysAdminPgh

Not having the correct date & time is driving me nuts. I have two wifi cards and not sure which one will work or will work better. 1 - Adrus WIFI 6E GC-WBAX210 - 2x2 802.11ax 160MHz Tri-Band WIFI + Bluetooth 5.2 PCIde Card 2 - tp-link AXE5400 Archer TXE75E 2402 Mbps + 2402 Mbps+574 Mbps Bluetooth 5.3 Any suggestions? Thanks Lori

I've got 99% working but stuck with not being able to change the location so the correct time can be used. Also I left the Ventura nvme in along with another nvme with Sequoia. When I re-boot it always loads the old Ventura. Is there a way to either get the 'menu' to come up or boot only from the Sequoia nvme? Only way for me to choose which boot drive is when I have the Install USB drive in. Going into the BIOS isn't helping as it defaults to Ventura. Ventura is on the TEAM TM8FP6001T Sequoia is on WD Blue SN570 Thanks for the help! Send me Mac-Pro.fios-router.home.zip

Then why does it not show up? I get absolutely nothing. Their tech support claims it should work straight out of the box. No changes needed in the bios.

Sorry about that. iMac Pro.zip

Hope I did this correct.ioreg.text.zip

I've run out of hard disk space and this new motherboard only has 4 sata ports. FebSmart says that their FS-S4-Pro card is out-of-the-box compatible with Mac. So far I can't get the card to be recognized. Not sure what to do. Or is there a better way to add sata ports? Thanks!

Finally ran out of storage along with running out of motherboard SATA ports so I'm trying to add FebSmart expansion card (FS-S4-Pro). They say it is out-of-the-box compatible but so far I can't get it to see any SATA drives. Any suggestions? Is there are better expansion card to use? Thanks!

I need to add another hard drive (10TB) and unfortunately the motherboard is limited in the number of SATA ports so I'm trying to add FebSmart FS-S4-Pro to add 4 more ports. FebSmart says that Mac is supported but has no documentation included. Any suggestions on how to get this to work? Is there a SATA expansion card that will work better? Thanks!

Now I get stuck at - Couldn't alloc class "AppleKeyStoreTest". IMG_0041.jpg.zip

Asus ROG Strix B760-A Intel I5-13500 32GB PC5-51200 Radeon RX-580 ALC4080 Audio Had sound at one point but when I upgraded to NVMe sound is gone. Thanks! Send me Loris-iMac-Pro.fios-router.home.zip

Decided to try Clover as to OpenCore and I get a bit further but still bomb out. Attached is the screen picture. IMG_0597.jpg.zip

Just looked at this laptop's specs and for USB it lists 2 USB 3.2 Gen 1 ports 1 USB 3.2 Gen 1 port with PowerShare 1 Thunderbolt 3(USB Type-C) port with Power Delivery I did all the rest of your suggestions. Any suggestions on the USB?

Alienware M17 R4 laptop (Dell) Intel i7-10870H @ 2.20 (Comet Lake) 16 GBtyes DDR4 Ram Intel UHD Graphics Nvidia GeForce RTX 3060 GPU WD 500 GB NVMe I get to this spot and that's it. It just keeps rebooting to the exact same spot. I'm not sure how to move forward with this. Any suggestions? Thanks!! IMG_0595.jpg.zip

I went with iMacPro1,1 but having trouble with disable the IGPU part. In the BIOS there isn't a way to disable it. I can't find where to do it in config.plist. Can you point me in the right direction? Again thanks!

Why did I change? That the one that fits the CPU and the one I've used for years. Thanks! I'll work on those changes.

Gave up and redid from the very start. Still running super slow. It's almost as if someone else is running stuff in the background. For example when I opened up a window for Applications it took a minute for each app icon to appear and it was one icon at a time. Any suggestions? Send me Loris-iMac.fios-router.home.zip

Looks like I'm on 12.3.1Screen Shot 2022-04-11 at 10.30.24 PM.zip

Could you please check my system out and see where I've gone wrong. It is so slow that it sometimes takes 2 minutes from clicking on a program till it runs. Downloads for the Apple store don't install. I have Big Sur on another SSD and no problems there. Send me iMac-Pro.fios-router.home.zip Thanks!

Could you please check out my DSDT. It took days to get this up and installed and right now all I can find that isn't working is a new monitor that my boss dropped off. It's a MSI Optic G271 and it is dark and won't allow anything past 1600x900 at 60 Hertz. Thanks again! https://filebin.net/ys9v7rvz67knxx1l

I'm running on a i7-7700 right now and z270 board with Catalina. Seems that trying to use this setup with Big Sur would be too slow and not worth the effort. I already have Radeon RX 580 8GB and DDR4 memory. So any suggestions on CPU and Board? What will be the most seamless install? Thanks!

I'm running on a i7-7700 right now and z270 board with Catalina. Seems that trying to use this setup with Big Sur would be too slow and not worth the effort. I already have Radeon RX 580 8GB and DDR4 memory. So any suggestions on CPU and Board? What will be the most seamless install? Thanks!

I got Big Sur to install and other than it being super slow I got everything but Sound to work. Could you please look at my SendMe to see where I'm screwing up? Thanks so much! Send me Loris-iMac.fios-router.home.zip

Hi. Got hit with ransomware and decided to start over and upgrade everything while doing so. Not like I can go out and enjoy anything with the lockdown. But could you PLEASE look and see if I need to update anything. Thanks... Stay safe! Send me iMac.fios-router.home.zip

Finally got Catalina installed could you please check this as I had a really hard time getting Catalina to install. Thanks!!!Send me Loris-iMac.zip

MaLdOn need your help again!!! CPU and motherboard replaced/fixed and I've gotten Catalina installed. I've gotten everything working (I think) except the computer refuses to turn off and stay off. Could you please look at my RunMe files. They were too large to attach here so I used TinyUpload. http://s000.tinyupload.com/index.php?file_id=83749491747526930032 Thanks!!!