DSDT patch requests

[Osk]

Hi [ref]MaLd0n[/ref], after using your DSDT file. My cpu is almost always at top frequency, and like 5 degrees hotter. Before the patch cpu goes down to 1.0 ghz in idle, now is jumping from 1.3 to 3.6 constantly in idle. Sleep do not work neither, black screen after waking up but I give up about that months ago, doesn't bother me. I attach a new send me file to check how a have my config.pls file.

thanks

Send me Efras-iMac.zip

Edited May 1, 2019 by Guest

[mattedsnooze]

Added in 2 minutes 15 seconds:

[ref]mattedsnooze[/ref], DSDT.aml.zip

 

Thanks. System info now good.

But sleep doesn't work properly. Comp goes down sleep, fan off and after 2-5 sec start again, but monitor not wakeup...

Please help...!

[MaLd0n]

[ref]vikindap[/ref], IN PREVIOUS DSDT I DONT DISABLE IT, TRY NOW

DSDT.aml.zip

[MaLd0n]

[ref]chris77[/ref], test usb2 now

DSDT.aml.zip

 

Added in 44 seconds:

[ref]BlonduRoo[/ref], what happens with sleep?

Added in 1 minute 32 seconds:

[ref]Osk[/ref], with my DSDT u have a native, without no, check what cause it, u can use a simple plugin type=1 in config.plist

Added in 47 seconds:

[ref]mattedsnooze[/ref], remove _prw into device xhc and use power button for wake, check if work

[elcapitan2016]

Hello , Good Day

I have problem on my laptop I just install Mojave for my laptop everything is fine except my HD-4600 intel graphics card it's only 4mb

I cannot change my video memory to 64mb as my Toshiba Bios is different

Please help me to fix my hd-4600 video card

PS does Mojave have ktext for alps trackpad ?

Looking forward for a help

PS

@maldon

I donate with different email account

2 May 2019 at 10:14:59 AM GMT+8Transaction ID: 7KU58612JH126690Y

Thanks you so much again

Send me name-MacBook-Air.zip

[MaLd0n]

[ref]elcapitan2016[/ref], DSDT.aml.zip

 

add it

<key>PciRoot(0)/Pci(0x02,0)</key>
		<dict>
			<key>AAPL,ig-platform-id</key>
			<data>BgAmCg==</data>
			<key>device-id</key>
			<data>EgQAAA==</data>
			<key>#hda-gfx</key>
			<string>onboard-1</string>
			<key>#AAPL00,override-no-connect</key>
			<data></data>
			<key>#AAPL00,override-no-edid</key>
			<data></data>
			<key>framebuffer-patch-enable</key>
			<integer>1</integer>
			<key>framebuffer-cursormem</key>
			<data>AACQAA==</data>
			<key>## @1 HDMI</key>
			<string></string>
			<key>#framebuffer-con1-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con1-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con1-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con1-pipe</key>
			<data>EgAAAA==</data>
			<key>## @2 HDMI</key>
			<string></string>
			<key>#framebuffer-con2-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con2-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con2-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con2-pipe</key>
			<data>EgAAAA==</data>
			<key>## @3 HDMI</key>
			<string></string>
			<key>#framebuffer-con3-enable</key>
			<integer>1</integer>
			<key>#framebuffer-con3-type</key>
			<data>AAgAAA==</data>
			<key>#framebuffer-con3-flags</key>
			<data>BgAAAA==</data>
			<key>#framebuffer-con3-pipe</key>
			<data>EgAAAA==</data>
			<key>## patch0</key>
			<string>Enable internal display after sleep for 0x0a2e0008 on 10.10.2-10.12.x (c) syscl</string>
			<key>#framebuffer-patch0-enable</key>
			<integer>1</integer>
			<key>#framebuffer-patch0-find</key>
			<data>AQAAAEAAAAAeAAAABQUJAQ==</data>
			<key>#framebuffer-patch0-replace</key>
			<data>AQAAAEAAAAAPAAAABQUJAQ==</data>
			<key>## patch1</key>
			<string>Enable internal display after sleep for 0x0a2e000a, 0x0a26000a</string>
			<key>#framebuffer-patch1-enable</key>
			<integer>1</integer>
			<key>#framebuffer-patch1-find</key>
			<data>AQAAAEAAAAAeAgAABQUJAQ==</data>
			<key>#framebuffer-patch1-replace</key>
			<data>AQAAAEAAAAAfAgAABQUJAQ==</data>
		</dict>

[elcapitan2016]

@maldon

Hi maldon i get this error

Acpibatterymanager warning fcurrentcapacity > fmaxcapacity . Adjusted fcurrentcapacity from 2600 , to 74

[MaLd0n]

[ref]elcapitan2016[/ref], u need apply a battery patch

[elcapitan2016]

@Maldon

Hi maldon , sorry do I need a ktext for battery patch

and also on the after I apply this to a copy of my original config.plist my display on my laptop is missing I can use only External Monitor HDMI and the video card memory is 1536mb

 

PciRoot(0)/Pci(0x02,0)

AAPL,ig-platform-id

BgAmCg==

device-id

EgQAAA==

#hda-gfx

onboard-1

#AAPL00,override-no-connect

#AAPL00,override-no-edid

framebuffer-patch-enable

1

framebuffer-cursormem

AACQAA==

## @1 HDMI

#framebuffer-con1-enable

1

#framebuffer-con1-type

AAgAAA==

#framebuffer-con1-flags

BgAAAA==

#framebuffer-con1-pipe

EgAAAA==

## @2 HDMI

#framebuffer-con2-enable

1

#framebuffer-con2-type

AAgAAA==

#framebuffer-con2-flags

BgAAAA==

#framebuffer-con2-pipe

EgAAAA==

## @3 HDMI

#framebuffer-con3-enable

1

#framebuffer-con3-type

AAgAAA==

#framebuffer-con3-flags

BgAAAA==

#framebuffer-con3-pipe

EgAAAA==

## patch0

Enable internal display after sleep for 0x0a2e0008 on 10.10.2-10.12.x © syscl

#framebuffer-patch0-enable

1

#framebuffer-patch0-find

AQAAAEAAAAAeAAAABQUJAQ==

#framebuffer-patch0-replace

AQAAAEAAAAAPAAAABQUJAQ==

## patch1

Enable internal display after sleep for 0x0a2e000a, 0x0a26000a

#framebuffer-patch1-enable

1

#framebuffer-patch1-find

AQAAAEAAAAAeAgAABQUJAQ==

#framebuffer-patch1-replace

AQAAAEAAAAAfAgAABQUJAQ==

code]

[MaLd0n]

[ref]elcapitan2016[/ref], u can enable a framebuffer-conx and test

[elcapitan2016]

@maldon

Sorry is this located at device --> arbitrary --> properties

and I will just add framebuffer-conx

[MaLd0n]

[ref]elcapitan2016[/ref], for test just remove # from patches, check with clover configurator Devices/properties

[mattedsnooze]

Added in 47 seconds:

[ref]mattedsnooze[/ref], remove _prw into device xhc and use power button for wake, check if work

 

Delete _prw into xhc - nothing change (((

[BlonduRoo]

Hi MaLd0n ,after sleeping sometimes stops sometimes not, when it stops and goes into sleep I start and does not start, black screen.

Edited May 2, 2019 by Guest

[Osk]

Added in 1 minute 32 seconds:

[ref]Osk[/ref], with my DSDT u have a native, without no, check what cause it, u can use a simple plugin type=1 in config.plist

Already tried all variations in SSDT section of Acpi in config.plist using clover configurator and nothing works, cpu frecuency is almost always at the top. It looks like PM is not working or is partially working. Again, my knowledge is very limited and for now removing your patched file is the only way that PM really works. In both scenarios, with or whitout the patched file it seems that everything is working fine except by the PM. What can be? It is really necesary to use the patched DSDT.aml? I'm asking because I have no idea about what the patch is changing and I'm little afraid of doing something wrong.

Thanks

[RanoMac]

Hello,

This is my son's Laptop Acer S7 391

The brightness, Battery, Microphone (lt of noise) and stand by don't work.

Can you make DSDT patch please ?

Thank you a lot !

Have a nice day

Send me Acer S7 2.zip

[MaLd0n]

[ref]mattedsnooze[/ref], if don't work ur problem is intelHD

Added in 41 seconds:

[ref]BlonduRoo[/ref], u need check what cause it, remove devices connect etc and take one shot

Added in 1 minute 8 seconds:

[ref]Osk[/ref], PM work with my dsdt or simple plkugin type=1 in config.plist, the problem is just some PStates

Added in 6 minutes 55 seconds:

[ref]RanoMac[/ref], DSDT.aml.zip

 

battery is a very personal patch, check here

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

audio

https://Olarila.com/forum/viewtopic.php?f=28&t=9788

sleep

produce this error and check log with terminal

log show --style syslog | fgrep "Wake reason"

[Azzoc]

Hi! Is it possible to enable the VGA port with DSDT?

Send me MBP-di-Peter.station.zip

[djuby]

Dear MaLd0n,

Can you please look at my DSDT and patch it where possible. Currently WiFi is not working. Not sure how patching works, but I want my laptop to be as close as possible to the real thing.

Dell Latitude E5450

CPU: Core i7 – 5600U @ 2.6 GHz

RAM: 16 GB DDR3

HDD: 256 GB SSD

Display: 14 inch

Resolution: 1920×1080

Video: Intel HD5500

Best regards.

P.S. How do I upload the ZIP file generated from RunMe app? It says file too large when I try to drop it here.

[MaLd0n]

Hi! Is it possible to enable the VGA port with DSDT?

 

u can try with Hackintool app, but in some cases don't work