[Guide] Install/Restore BigSur with OpenCore

[MarceloMustaine]

3 hours ago, MaLd0n said:

esse wifi não funciona e nem esse trackpad. não sei se eles conseguiram resolver isso

Acho que não resolveram ainda sobre o trackpad, mas dá pra tentar instalar as novas kext pra teste

[johnv]

Did developer beta 6 changed something? I have been running an Haswell machine ( hp elitedesk g1 ,which EFI I got from here) perfectly. I have been updating from beta to beta through the system updater, no problem what so ever. With beta 6 it broke my Igpu. No acceleration and only get 7MB of Vram. Was working just fine on all previous betas... Help please. 

[lclerte]

On 8/18/2020 at 8:41 PM, lclerte said:

Hello!! WHo knows how to disable csrutil authenticated-root in BiG Sur beta 4 ?? ( to disable completely SIP in Big Sur beta 4)

my spec: bootargs ! csr-..... 67000000 DATA

Should I write. FF0F0000. or FF070000 or other value for SIP completely disable ?

I did , in the terminal of BS beta 4 installer :

csrutil authenticated-root disable

I reboot ..

and , in terminal :

Last login: Tue Aug 18 20:34:19 on console

~ % csrutil authenticated-root status

Authenticated Root status: enabled

~ % csrutil status

System Integrity Protection status: disabled.

THANKS !!!

very simple : (boot to your USB installer for your beta 4 then: when you are on the first windows : language : click english or other .. then second window : you have , in the menu bar Terminal : click  write :  csrutil authenticated-root disable..... so you did it : But)  you have , I think , two solutions: first is to leave blank your bootarg csr-active-config  in your config plist (after doing in the installer terminal : csruitl disable ; csrutil athenticated-root disable) , or write 67080000....

try also 77080000 (which works for me)   in textmate: 

                <key>csr-active-config</key>
                <data>dwgAAA==</data>

[Kaoman]

getting this error. is it cuz im using an nvme drive?  it goes here and reboot loops everytime 

Photo Sep 11, 6 26 00 PM.png.zip

[MaLd0n]

1 hour ago, Kaoman said:

getting this error. is it cuz im using an nvme drive?  it goes here and reboot loops everytime

in this case try with vsmcgen=1

[Kaoman]

41 minutes ago, MaLd0n said:

in this case try with vsmcgen=1

did this and it went to pci configuration begins then reboots 

[MaLd0n]

Just now, Kaoman said:

did this and it went to pci configuration begins then reboots 

reset nvram first time?

 

[Kaoman]

36 minutes ago, MaLd0n said:

reset nvram first time?

 

yes , i remember you posting that somewhere. now it passes again but it goes and reboots like the first place it used to. but it says ioplatformhaltrestartaction --> applesmc

Edited September 12, 2020 by Kaoman

[MaLd0n]

58 minutes ago, Kaoman said:

yes , i remember you posting that somewhere. now it passes again but it goes and reboots like the first place it used to. but it says ioplatformhaltrestartaction --> applesmc

try with fakesmc instead

[Kaoman]

Just now, MaLd0n said:

try with fakesmc instead

ok ill try that and see if it works

25 minutes ago, Kaoman said:

ok ill try that and see if it works

nope same thing, i finished the installer and now im trying to boot the setup but nothing. the installer booted fine , no problems, installed to disk. now trying to boot and nothing, this error is screwing my plans 

[analise65]

11 hours ago, Kaoman said:

ok ill try that and see if it works

nope same thing, i finished the installer and now im trying to boot the setup but nothing. the installer booted fine , no problems, installed to disk. now trying to boot and nothing, this error is screwing my plans 

I think we have the same issue.

Opencore boots fine, I managed to install until 12/13 minutes remaining, after that tries to boot, but crashes.

Then manual rebooting opencore loads fine there's a option for bigsur macos install select this and at the phase that the apple logo is already up the screen it crashes and can't even see the errors, because it's too quickly something with "sigakill: shutdown...!!!.

Been this week trying to figure this thing out, but no show!

Any clues?

EDIT: Since I can't make any usb to boot in my system, i booted from empty internal ssd, only with EFI populated, after that i use the usb  to make the installation to the internal SSD. Could this be the issue?

HP XW6600, 2xXeonE5430, 16 GB, 256GB SSD, Nvidia 710GT. 

EDIT2: I was able to get a picture of the final verbose, just before the screen become black. Can anyone make something of this, it's not very clear.

Screenshot 2020-09-11 at 17.33.35.zip

Edited September 12, 2020 by analise65

[Kaoman]

11 hours ago, analise65 said:

I think we have the same issue.

Opencore boots fine, I managed to install until 12/13 minutes remaining, after that tries to boot, but crashes.

Then manual rebooting opencore loads fine there's a option for bigsur macos install select this and at the phase that the apple logo is already up the screen it crashes and can't even see the errors, because it's too quickly something with "sigakill: shutdown...!!!.

Been this week trying to figure this thing out, but no show!

Any clues?

EDIT: Since I can't make any usb to boot in my system, i booted from empty internal ssd, only with EFI populated, after that i use the usb  to make the installation to the internal SSD. Could this be the issue?

HP XW6600, 2xXeonE5430, 16 GB, 256GB SSD, Nvidia 710GT. 

EDIT2: I was able to get a picture of the final verbose, just before the screen become black. Can anyone make something of this, it's not very clear.

Screenshot 2020-09-11 at 17.33.35.zip 1.06 MB · 0 downloads

similar but different, mine completed the installer fully, no issues there. when i try to boot into the finished product i get my error. ill try and upload the whole video somewhere so you guys can see it and maybe help identify the issue 

[Kaoman]

ok i tried with your config plist but i am now stuck on exitdbslog again

when i use my plist it restarts after booting with the error i posted earlier.

this new plist has more options than mine so maybe its better. 

maybe you can take a look at it to see if i went wrong somewhere. hopefully this is solved and i can play with big sur

 

EDIT: reinstalled and now its working fine. didnt do anything different but maybe a file was left out. kind of slow though, is it because of the nvme drive? even the sound is laggy 

 

 

Edited September 13, 2020 by Kaoman

[analise65]

17 hours ago, Kaoman said:

ok i tried with your config plist but i am now stuck on exitdbslog again

when i use my plist it restarts after booting with the error i posted earlier.

this new plist has more options than mine so maybe its better. 

maybe you can take a look at it to see if i went wrong somewhere. hopefully this is solved and i can play with big sur

 

EDIT: reinstalled and now its working fine. didnt do anything different but maybe a file was left out. kind of slow though, is it because of the nvme drive? even the sound is laggy 

Hi,

What's options did you change, i think you mean quircks, right?

Could you post your config file.

Thanks

 

 

[oldman20]

hi, what about Big Sur with AR9285? I cant make it work!

[gerard71]

hello MaLd0n quick question you gave me a dsdt for my gigabyte z270 gaming k3 is it necessary to add in addition the SSDs SSDT-EC-USBX.aml AND SSDT-PLUG.aml? under BIG SUR when the computer goes to sleep when I wake it up the processor starts up and crashes the system it looks like the processor management is bad thank you

DSDT.aml

Edited September 18, 2020 by gerard71

[MaLd0n]

On 9/15/2020 at 12:31 PM, oldman20 said:

hi, what about Big Sur with AR9285? I cant make it work!

i think if u disable protections yes

[MarceloMustaine]

MaLd0n, eu refiz a instalação do sistema porque o comando para resize não estava funcionando... agora aconteceram umas coisas estranhas. o sistema "instalou", coisa que não estava acontecendo antes... só que ele não aparece por exemplo o meu HD direto pra dar boot, só a opção "Preboot", que eu selecionando ela consigo usar o sistema normalmente, só que o meu áudio não funciona de jeito nenhum! e antes funcionava! o que será que pode ser isso?

Edited September 19, 2020 by MarceloMustaine

[oldman20]

12 hours ago, MaLd0n said:

i think if u disable protections yes

please more clearly, sir? what's the protections? i inject kext which working on 10.15.6 but not works! 

[MaLd0n]

sip

[MarceloMustaine]

On 9/19/2020 at 1:11 PM, MaLd0n said:

sip

fiz esse procedimento, dava load na appleALC e na Lilu normalmente mas não tinha som, tentei voodoohda, não carrega a kext, coloquei um patch que você fez pra mim para o som no clover, aí ele reconhece o som fica como desconhecido no hackintool e não funciona de jeito nenhum o som, mas na instalação anterior funciona normal(fazendo restore)

[MaLd0n]

eu me lembro que esse notebook tinha uma zica no áudio. tinha vezes que não funcionava por nada. o problema era nvram

[MarceloMustaine]

27 minutes ago, MaLd0n said:

eu me lembro que esse notebook tinha uma zica no áudio. tinha vezes que não funcionava por nada. o problema era nvram

O que eu posso fazer na questão da nvram?

[MaLd0n]

3 hours ago, MarceloMustaine said:

O que eu posso fazer na questão da nvram?

emuvariable

[Aloisio]

Ola Maldon, qual parte na configuração do open core resolve problemas em restart. Porque solicitar o restart ele não sai totalmente e fica em uma tela preta após desligar o monitor. O shutdown  funciona normal. acredito que isto tem atrapalhado fazer o update das versões. Ocorre isto preciso apertar o reset físico da maquina.

Edited September 22, 2020 by Aloisio