Hackintosh Guide - Install MacOS Catalina with Intel 10th Mobile Processors using OpenCore bootloader

[MaLd0n]

2 hours ago, Paolo7297 said:

Hi, i have this kernel panic when going to sleep

u disable hibernate etc?

first run it

https://olarila.com/files/Utils/OlarilaRepair.app.zip

and post one full dump too

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

[Paolo7297]

1 hour ago, MaLd0n said:

u disable hibernate etc?

first run it

https://olarila.com/files/Utils/OlarilaRepair.app.zip

and post one full dump too

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

I tried after OlarilaRepair, but nothing changed..

RunMe app doesn't wanted to save ioreg (it pastes /tmp/send_me too fast) so i'll upload alone...

I'm not able to upload bigger files, so here it is: https://mega.nz/folder/zQ9HjBCZ#Dr9NTUWDxUZ-7BrcoEP2mg

[MaLd0n]

3 hours ago, Paolo7297 said:

I tried after OlarilaRepair, but nothing changed

use it, reboot and extract new sendme

config.plist.zip

[Paolo7297]

1 hour ago, MaLd0n said:

use it, reboot and extract new sendme

config.plist.zip 4.78 kB · 1 download

Tried, updated here https://mega.nz/folder/zQ9HjBCZ#Dr9NTUWDxUZ-7BrcoEP2mg

[MaLd0n]

2 hours ago, Paolo7297 said:

Tried, updated here https://mega.nz/folder/zQ9HjBCZ#Dr9NTUWDxUZ-7BrcoEP2mg

DSDT.aml.zip

disable all ssdts

new ioreg after reboot

[Paolo7297]

13 hours ago, MaLd0n said:

DSDT.aml.zip 49.76 kB · 1 download

disable all ssdts

new ioreg after reboot

I have no brightness, but using remote control i was able to do everything.

Updated here: https://mega.nz/folder/zQ9HjBCZ#Dr9NTUWDxUZ-7BrcoEP2mg

 

EDIT: After a reboot i have brightness again... so there's something strange (sometimes happened before)

Edited September 17, 2020 by Paolo7297

[MaLd0n]

15 hours ago, Paolo7297 said:

EDIT: After a reboot i have brightness again... so there's something strange (sometimes happened before)

yes. is a nvram problem or bootloader

devs need fix that in icelake  

[Paolo7297]

8 hours ago, MaLd0n said:

yes. is a nvram problem or bootloader

devs need fix that in icelake  

The Sleep or the brightness problem? 

[bimantoro]

On 8/1/2020 at 9:05 PM, MaLd0n said:

use this folder

http://s000.tinyupload.com/index.php?file_id=70213875618284026209

reset nvram first time

hi @MaLd0n can you share this folder again? i try this link is 504status

[MaLd0n]

2 hours ago, bimantoro said:

hi @MaLd0n can you share this folder again? i try this link is 504status

https://www.olarila.com/topic/5676-folders-for-all-chipsets-clover-and-opencore/

[bimantoro]

On 9/28/2020 at 10:38 PM, MaLd0n said:

https://www.olarila.com/topic/5676-folders-for-all-chipsets-clover-and-opencore/

hi @MaLd0n can u help me? i get in stuck begining of opencore, i use oc 0.6.1 with i5-10210U cometlake and NVme ssd.

this the stuck's image

https://ibb.co/NpMNk1C

(edit)

i have try your 10th gen mobile folder installer and success to installer menu but i can't find my NVme ssd, just my usb stick drive, what should i do? 

thanks

Edited October 3, 2020 by bimantoro

[MaLd0n]

10 hours ago, bimantoro said:

but i can't find my NVme ssd

strange. idk what happens

[cengizhanunal]

Hi @MaLd0n,

I'm running Catalina on i7-10750H notebook but it seems like i can't boot without USB. Even with USB i couldn't figure it out to run properly because it's really slow. When i try to boot from my HDD with your EFI folder (and i watched your opencore tutorial) it gives me this screen and reboots automatically. I know it says MacbookAir9,1 but i've tried MacbookPro16,1 and 16,2 too. Same error. Any help?

https://imgur.com/N7vRYwb

Edited October 4, 2020 by cengizhanunal

[MaLd0n]

1 hour ago, cengizhanunal said:

Hi @MaLd0n,

use folder from usb

[prabhat04]

On 9/17/2020 at 1:16 PM, Paolo7297 said:

I have no brightness, but using remote control i was able to do everything.

Updated here: https://mega.nz/folder/zQ9HjBCZ#Dr9NTUWDxUZ-7BrcoEP2mg

 

EDIT: After a reboot i have brightness again... so there's something strange (sometimes happened before)

Do you have asus ice lake hackintosh ??

i need efi as I have been not achieving gpu working 

[vnadu]

I'm new to this hackintosh, could you help me?
I'm trying in many ways to install the system on an M.2 SSD and always freezes the screen in the bootloader 

 

[MaLd0n]

what ur hardware? clover or opencore? last version?

[Pardeep Kumar]

Hello, first of all Thank you for this forum.. Really love it.

I'm trying to boot Catalina, it boots fine and runs the setup but the problem I'm facing is that when I run Disk Utility in setup it only shows me USB device and did not detect my internal SSD.

I'm using the following hardware.

Acer Predator Triton 300

Intel i7-10750H

16GB RAM

nVMe SSD - Intel Optane with RAID <-- This is my 1TB SSD.

4GB nVidia 1650Ti GPU

 

I'm using clover to boot.

[Charly10000]

On 11/21/2020 at 4:44 PM, Pardeep Kumar said:

Hello, first of all Thank you for this forum.. Really love it.

I'm trying to boot Catalina, it boots fine and runs the setup but the problem I'm facing is that when I run Disk Utility in setup it only shows me USB device and did not detect my internal SSD.

I'm using the following hardware.

Acer Predator Triton 300

Intel i7-10750H

16GB RAM

nVMe SSD - Intel Optane with RAID <-- This is my 1TB SSD.

4GB nVidia 1650Ti GPU

 

I'm using clover to boot.

Hi.

Can you publish your EFI? One of my friends have a Triton 500.

 

thank you very much.

[broadw3ll]

Hi @MaLd0n how it going ? I have a laptop Razer stealth 13' with an intel i7 1065g7 and im having a lot of problems I can't boot from your efi folder I get stuck in a very early stage (image: https://www.mediafire.com/view/nu1bl9w67tzejyz/ed5e5ad3-578e-4c36-bc4a-c8d5185cb49d.jpg/file) I have somehow made one folder that ether didn't  work but at least gives me a more of log (here is my folder: https://www.mediafire.com/file/8ywvv0fhjm2gpos/EFIbeta.zip/file) with efi folder im facing this exact problem: https://github.com/dortania/bugtracker/issues/17 can u give me some help?  as far I can understand its a problem with my usb, in windows I have tried al my USB ports which are HS01,HS02,HS03,HS04,HS10,SS01,SS02,SS03