Upgrading from GTX 680 to RX 580 gives black screen

[MaLd0n]

https://www.olarila.com/topic/5295-guide-hardware-encoder-hardware-decoder-video-processing-hevc-support-intel-quick-sync/

[Blast9999]

Thank you, I’ll try that on the weekend. 

[Blast9999]

It has not crashed since Wednesday, so should I still update the video support? I checked with Videoproc, please see screenie.

Screen Shot 2020-06-20 at 5.27.01 PM.zip

OK, it just crashed again! Update Lilu and Whatevergreen kexts, then change the ig-platform-id using Clover Configurator, and make sure IntelHD is on in bios, does that sound like it?

Edited June 20, 2020 by Blast9999

[MaLd0n]

looks good

for intel quick sync in ur case, just enable intelhd in bios/uefi

[Blast9999]

I checked my bios (Gigabyte Z170-HD3P) and I don't see intelhd option. Under Chipset I have VT-d Disabled and Internal Graphics as Auto. Should I change the Internal Graphics to enabled? thanks!

[MaLd0n]

internal graphics to enable

[Blast9999]

I tried it but so far since doing that update yesterday I have had two random crashes of MacOS. I get some buzzing noise thru the speaker, and artifacts instead of the cursor just now with the freeze. After updating the two kexts, I verified that the update version was done in Clover Configurator, and I double checked that the Intel was checked under Graphics. I noticed now I see both GPU 1 and 2 (Intel HD Graphics 530 and Radeon RX 580) under Compute in Geekbench 5 so the changes were verified. Any other ideas to help stop the crashing?

[MaLd0n]

no idea

[Blast9999]

Ok, other than that I'm happy with the build. Maybe the next update release I'll have better luck. What about a custom DSDT patch? Could that possibly make a difference? 

Edited June 29, 2020 by Blast9999

[MaLd0n]

same for all systems

[Blast9999]

Ok, I'll have to try something. So far this morning it has rebooted twice. It seems that latest change with the internal gpu made the problem worse, as last week it only crashed twice all week.

[Blast9999]

I plugged in my test ssd, which has a fresh Olarila 10.15.5 installed to try something and it notified me to install the supplemental update for 10.15.5 which I did. My main nvme drive did not notify me to do that update so far. How can I tell if the update has been done (don't see the update history), and how can I make my main system see the update? 

[MaLd0n]

use SystemPreferences/SoftwareUpdates

 

[Blast9999]

Thanks, I was hoping for a log of the updates. I re-enabled csm in bios and was going to put the GTX680 card back in to see if the crashing stopped, but then I noticed that my system boots ok into Catalina after turning csm on, even with the Sapphire 580 installed. I'll let it run and see if it still crashes like this.

[Blast9999]

It seemed ok yesterday with csm on, and the 580 installed, but crashed overnight when I left it running (display sleep on). Then this morning it crashed a few more times. Next I installed the old Nvidia GTX 680 4GB again and I'll see if that makes a difference. The display looks quite different (more contrasty) without the HDR option on using the Sapphire 580.

[MaLd0n]

https://www.olarila.com/topic/5295-guide-hardware-encoder-hardware-decoder-video-processing-hevc-support-intel-quick-sync/

[Blast9999]

Yes I did try that last week.

1. With the Sapphire, I double checked my config.plist file is updated with Inject Intel, and 0x1912001 ig-platform-id and disabled csm in bios, Intel graphics enabled.

2. System crashes randomly with artifacts for cursor and speaker white noise, just like previously since the Sapphire was first installed.

3. Changed csm back to enabled, left Intel graphics enabled, no improvement - still crashes.

3. Swapped the Nvidia GTX680 back in, with no other changes - system has NOT crashed in the last 48 hours running non-stop, and VideoProc now reports NA for hardware acceleration (see screenie).

Any other ideas to try appreciated! thanks.

Screen Shot 2020-07-08 at 12.45.58 PM.zip

[MaLd0n]

use amd+intelhd+shikigva=80

[Blast9999]

I’ll try it. That goes in Clover at the start screen? Should I disable csm again before trying? Thanks!

[MaLd0n]

if u dont have black screen with amd card, don't need disable csm

shikigva is a bootarg