shovebove Posted January 9, 2020 Share Posted January 9, 2020 Hi First, thanks for the resources on this forum! Specs: HP Z440 Xeon e5-1660v3 (8 core, 3.0GHZ) 32GB RAM 500GB SSD Intel Ethernet Nvidia Quadro I am trying to boot my High Sierra installer with the clover folder provided for X99 from this site, and my boot stops at [ PCI Configuration Begin ]. I attached picture detailing my EFI USB folder (config.plist is the default from X99 CLOVER folder here: https://Olarila.com/forum/viewtopic.php?f=28&t=8222) I also attached where the boot gets stuck. I have extracted my DSDT, and attached it. Maybe the fix is there? My BIOS settings are pretty trivial - I disabled VT-d, secure boot (no option to disable CSM), and disabled all PCI/SATA slots/ports that are not used. would appreciate some help! Thanks Added in 7 minutes 3 seconds: In case it helps - here is the full origin folder from F4 at Clover (and the assembled .dsl files using iasl). Archive.zip origin.zip Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 9, 2020 Administrators Share Posted January 9, 2020 [ref]shovebove[/ref], DSDT.aml.zip check correct tsc sync -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 [ref]MaLd0n[/ref], Thank you for the quick response! much appreciated. I replaced the DSDT.aml in /EFI/Clover/acpi/patched, and I am still getting the boot process stuck at same message ( [ PCI Configuration Begin ]) Any idea? Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 10, 2020 Administrators Share Posted January 10, 2020 [ref]shovebove[/ref], u need tsc sync and in some cases need a pci patch -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 [ref]MaLd0n[/ref], Thanks again for responding! Could you please help me with it? I don't know where to start with both patches. Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 10, 2020 Administrators Share Posted January 10, 2020 [ref]shovebove[/ref], https://bitbucket.org/RehabMan/voodootscsync/downloads/ pci patches have in Olarila folder -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 [ref]MaLd0n[/ref], It turns out I have both patches enabled (I know only one applies to 10.3.X), and I have VoodooTSCSync in my Clover folder. I attached my full clover in this reply. Anything abnormal or that I could be missing? CLOVER.zip Link to comment Share on other sites More sharing options...
Administrators MaLd0n Posted January 10, 2020 Administrators Share Posted January 10, 2020 [ref]shovebove[/ref], Check bios settings like 4g encoding... -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 [ref]MaLd0n[/ref], No such setting the bios I have attached the extracted bios using UEFItool and IFRExtract in txt format. No 'above 4g decoding'... feel stuck It also crashes at different points. Sometimes [ PCI Configuration Begin ], sometimes before, sometimes HID Shim, etc.. setup.txt Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 Omg it was my PCIE bios settings! - I changed a PCIE MMIO setting in BIOS from 64-bit to MMIO. - Deleted the DSDT.aml you provided me, and restored the DSDT fixes in the original Olarila X99 Config.plist - It booted past the usual point, and eventually stopped at this error (I attached it). This is like after 1 min of booting messages. I extracted my 'new' DSDT.aml now with the new bios settings using F4. Can you help me with the new error please? Added in 11 seconds: Omg it was my PCIE bios settings! - I changed a PCIE MMIO setting in BIOS from 64-bit to AUTO. - Deleted the DSDT.aml you provided me, and restored the DSDT fixes in the original Olarila X99 Config.plist - It booted past the usual point, and eventually stopped at this error (I attached it). This is like after 1 min of booting messages. I extracted my 'new' DSDT.aml now with the new bios settings using F4. Can you help me with the new error please? origin_full.zip image.zip Link to comment Share on other sites More sharing options...
shovebove Posted January 10, 2020 Author Share Posted January 10, 2020 The above error is fixed if I drop all CPU PM from the SSDT (using clover DropOEM). But now I get a new error (Arch couldn't be recognised, I attached the image) image.zip Link to comment Share on other sites More sharing options...
)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now