Olarila HS on ASUS Z390 P I7 9700 KF nvidia GTX 960

[lc_4c]

Dear All,

I have no success in installing Olarila HS (using the forum guide) on my Asus Z390 P i7 9700KF nVidia GTX 960 based system.

Bios vers. 2026 default settings

VT-d disable

CFG-Lock disable

Secure Boot Mode disable

Set XHCI Enabled


CSM disable

setting up the 32GB USB Stick (Windows Balena-Olarila method)

booting into Olaria"clover" ok

allways, no matter which USB port or boot agument are used the last screen output is always:

apfs_module_start:1279 ....

and the system freezes

Any help or useful tips are highly appreciated

Thanks a lot

Norbert

[MaLd0n]

[ref]lc_4c[/ref], need a full dsdt patch

[lc_4c]

lc_4c, need a full dsdt patch

Thanks for your answer MaLd0n. A short hint how to provide the dsdt patch would help me a lot.

[lc_4c]

[ref]lc_4c[/ref], need a full dsdt patch

 

Ok i finally create a DSDT file using RWeverything. What do do next? Sent it where or to whom? Sorry for this maybe silly and dull question.

Kind regards out of Germany

[MaLd0n]

[ref]lc_4c[/ref], need a patches into dsdt

[lc_4c]

[ref]lc_4c[/ref], need a patches into dsdt

 

Sorry, but what to do exactly? As I wrote, I can not boot into the OSX installer to edit or modify the dstd information directly.

Kind regards

Norbert

[MaLd0n]

[ref]lc_4c[/ref], post ur dsdt here

[lc_4c]

Thanks will do that tomorrow ?

[lc_4c]

[ref]lc_4c[/ref], post ur dsdt here

 

Attached is the DSDT.aml file using the "windows" method. Attached is the clover_boot screen no matter which boot argm. are used (Olarila HS link used)

Thanks a lot for your help

Kind regards out of germany

Norbert

DSDT_Clover.zip

[MaLd0n]

[ref]lc_4c[/ref], DSDT.aml.zip

[lc_4c]

[ref]lc_4c[/ref], DSDT.aml.zip

[ref]lc_4c[/ref], DSDT.aml.zip

Many Thanks, now I have to find out how to patch the existing Olarila HS USB stick with the DSDT.aml file. Right?!

[lc_4c]

[ref]lc_4c[/ref], DSDT.aml.zip

Hey MaLd0n it seems that I have a not perfect yet but slowly working Hackintosh system. Post Installation has to done later on. Thanks a lot for your help.

By the way what was the main difference in the dstd files

Kind regards out of Germany

Norbert

[MaLd0n]

[ref]lc_4c[/ref], use Olarila folder serie 100/200/300 + my dsdt

[lc_4c]

[ref]lc_4c[/ref], use Olarila folder serie 100/200/300 + my dsdt

Done using the series 10/20/30 folder from the Olarila App. Is that right or do I need to use a different on?

Ssd Write (80MB/s) was very low but after enabling trim for the 950 evo it’s about 200MB/s. SATA is still on Generic AHCI Controller

Audio is working as internal speaker

Nvidia is fine even with the HS 17G2208 build and support two monitors

Shutdown and restart does not work?. System power switch has to be used.

Any hints?

Kind regards out of Germany

Norbert

[MaLd0n]

[ref]lc_4c[/ref], extract new send_me

[lc_4c]

[ref]lc_4c[/ref], extract new send_me

 

Donation via PayPal made and send_me should be in your post box

Kind regards

Norbert