[Guide] Mobile Intel HD Graphics / Clover or Opencore

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

MaLd0n · September 18, 2020

1 hour ago, Arturo Miranda said:

not work for hd4400 laptop on catalina

work. tested many times. i some cases u need a connectors for hdmi output work

Arturo Miranda · September 18, 2020

8 hours ago, MaLd0n said:

work. tested many times. i some cases u need a connectors for hdmi output work

the last answer in this post

its works perfect!!

thanks!!!

Edited September 18, 2020 by Arturo Miranda
me

MaLd0n · September 18, 2020

MaurícioBoladão · September 25, 2020

vlw!! ?

Edited September 25, 2020 by MaurícioBoladão

josesach2133 · September 28, 2020

how and where should I paste the text? I open it with the propertree and clover configurator but I don't know where to put it, can you help me?

MaLd0n · September 28, 2020

3 hours ago, josesach2133 said:

how and where should I paste the text? I open it with the propertree and clover configurator but I don't know where to put it, can you help me?

devices properties

josesach2133 · September 29, 2020

I have a uhd 620 and I don't know which of these can work with my graph, since I don't see any for it

MaLd0n · September 29, 2020

what ur processor?

AmazingHarsh · September 30, 2020

Where should I paste the above code , I am having I3 6006U intel hd 520

it is showing 4 mb

config+clover+info.zip

Edited September 30, 2020 by AmazingHarsh
uploaded wrong config

MaLd0n · September 30, 2020

57 minutes ago, AmazingHarsh said:

Where should I paste the above code

devices properties

AmazingHarsh · September 30, 2020

Not working .

I am having I3 6006U intel hd 520

it is showing 4 mb

my config

config23.plist.zip

EthanNicotine · October 5, 2020

On 9/30/2020 at 6:52 AM, MaLd0n said:

devices properties

In clover's config.plist there is no DeviceProperties

MaLd0n · October 5, 2020

u need create

Mac-B · October 8, 2020

Olá, boa tarde. O patch Genérico de vídeo serve para todas as versões de intel Graphics HD, inclusive as não suportadas, ou só pra não suportadas?

Obrigado.

MaLd0n · October 9, 2020

9 hours ago, Mac-B said:

Olá, boa tarde. O patch Genérico de vídeo serve para todas as versões de intel Graphics HD

Não

Mac-B · October 10, 2020

Então seria para as gráficas de 2ª e 3ª geração?

cesare · November 12, 2020

I tried to insert the patch for HD620 Ice Lake but I got the result as in the picture .. did I do something wrong? I attach config and screenshots. Can you check if I entered the data correctly .. thanks

Archivio.zip

Edited November 12, 2020 by cesare

zack Elbaitil · November 18, 2020

what about i7-10700k intel UHD 630 Comet lake motherboard z490 aorus master

i need only the patch for itegrated graphic (intel uhd 630 comet lake)

thanks

MaLd0n · November 18, 2020

4 hours ago, zack Elbaitil said:

what about i7-10700k intel UHD 630 Comet lake motherboard z490 aorus master

Quote

           <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
           <dict>
               <key>AAPL,ig-platform-id</key>
               <data>BwCbPg==</data>
               <key>device-id</key>
               <data>mz4AAA==</data>
               <key>enable-hdmi20</key>
               <data>AQAAAA==</data>
               <key>framebuffer-con0-enable</key>
               <data>AQAAAA==</data>
               <key>framebuffer-con0-pipe</key>
               <data>EgAAAA==</data>
               <key>framebuffer-con0-type</key>
               <data>EAAAAA==</data>
               <key>framebuffer-con1-enable</key>
               <data>AQAAAA==</data>
               <key>framebuffer-con1-pipe</key>
               <data>EgAAAA==</data>
               <key>framebuffer-con2-enable</key>
               <data>AQAAAA==</data>
               <key>framebuffer-con2-pipe</key>
               <data>EgAAAA==</data>
               <key>framebuffer-con2-type</key>
               <data>AAgAAA==</data>
               <key>framebuffer-patch-enable</key>
               <data>AQAAAA==</data>
               <key>framebuffer-unifiedmem</key>
               <data>AAAAgA==</data>
               <key>hda-gfx</key>
               <string>onboard-1</string>
           </dict>

add igfxonln=1

zackcr7 · November 18, 2020

just a last a question I have a nvdia rtx 2080 super

so in the bios settings I must leave it pci slot 1 or change it to igfx ?

and I must use an HDMI directly to the motherboard ? because I sue a DP injected to my Nvidia

thanks fo your help

MaLd0n · November 18, 2020

4 hours ago, zackcr7 said:

just a last a question I have a nvdia rtx 2080 super

this card dont work, use -wegnoegpu to disable it on-the-fly

zack Elbaitil · November 18, 2020

i tried all that and other things but stuck on black screen or gioscreenlockstate 3 hs 0 bs 0 now 0 sm 0x0 or other thing

i use igfx enable dvmt 64 mb dvmt total max

MaLd0n · November 19, 2020

1 hour ago, zack Elbaitil said:

i tried all that and other things but stuck on black screen or gioscreenlockstate 3 hs 0 bs 0 now 0 sm 0x0 or other thing

what processor?

zackcr7 · November 19, 2020

SUCCESS Big Sur Hackintosh

My Config

Z490 Aorus Master

i7-10700K

16GB DDR4 3000 MHZ

intel UHD 630 iGFX with Nvidia RTX 2080 Super PCI x16

To Fixe HDMI black screen ADD THIS to your config.plist

Monitor now work with HDMI

   <key>Add</key>
   <dict>
       <key>PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)</key>
       <dict>
           <key>device-id</key>
           <data>
           8hUAAA==
           </data>
       </dict>
       <key>PciRoot(0x0)/Pci(0x1f,0x3)</key>
       <dict>
           <key>layout-id</key>
           <integer>11</integer>
       </dict>
       <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
       <dict>
           <key>AAPL,ig-platform-id</key>
           <data>
           BwCbPg==
           </data>
           <key>device-id</key>
           <data>
           mz4AAA==
           </data>
           <key>framebuffer-con0-busid</key>
           <data>
           AgAAAA==
           </data>
           <key>framebuffer-con0-enable</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-con0-flags</key>
           <data>
           xwMAAA==
           </data>
           <key>framebuffer-con0-index</key>
           <data>
           AgAAAA==
           </data>
           <key>framebuffer-con0-pipe</key>
           <data>
           CgAAAA==
           </data>
           <key>framebuffer-con0-type</key>
           <data>
           AAgAAA==
           </data>
           <key>framebuffer-con1-busid</key>
           <data>
           BAAAAA==
           </data>
           <key>framebuffer-con1-enable</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-con1-flags</key>
           <data>
           xwMAAA==
           </data>
           <key>framebuffer-con1-index</key>
           <data>
           AwAAAA==
           </data>
           <key>framebuffer-con1-pipe</key>
           <data>
           CAAAAA==
           </data>
           <key>framebuffer-con1-type</key>
           <data>
           AAgAAA==
           </data>
           <key>framebuffer-con2-busid</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-con2-enable</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-con2-flags</key>
           <data>
           xwMAAA==
           </data>
           <key>framebuffer-con2-index</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-con2-pipe</key>
           <data>
           CQAAAA==
           </data>
           <key>framebuffer-con2-type</key>
           <data>
           AAQAAA==
           </data>
           <key>framebuffer-fbmem</key>
           <data>
           AACQAA==
           </data>
           <key>framebuffer-patch-enable</key>
           <data>
           AQAAAA==
           </data>
           <key>framebuffer-stolenmem</key>
           <data>
           AAAwAQ==
           </data>
       </dict>
       <key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key>
       <dict>
           <key>IOName</key>
           <string>#display</string>
           <key>class-code</key>
           <data>
           /////w==
           </data>
           <key>name</key>
           <data>
           I2Rpc3BsYXk=
           </data>
       </dict

Add only darkwake=0 to bootarg no other things

my kexts are APPLEALC, FAKEPCIID Intel I 225-V, FAKEPCIID, USBINJECTALL, iTLWM, LILU, SMCPROCESSOR, SMCSUPERIO, USBPORTS, VIRTUALSMC, WHATEVERGREEN

THANKS FOR YOUR HELP

Queen Qin · November 23, 2020

I'm on big sur with clover 5126 version

hd4600 still cannot detect after patch, is it because of the dsdt file ?

MSI gp60 2pe
Intel 4710hq
intel HD4600
Clover 5126

config.zip

Sign In

[Guide] Mobile Intel HD Graphics / Clover or Opencore

Recommended Posts

MaLd0n

Arturo Miranda

MaLd0n

MaurícioBoladão

josesach2133

MaLd0n

josesach2133

MaLd0n

AmazingHarsh

MaLd0n

AmazingHarsh

EthanNicotine

MaLd0n

Mac-B

MaLd0n

Mac-B

cesare

zack Elbaitil

MaLd0n

zackcr7

MaLd0n

zack Elbaitil

MaLd0n

zackcr7

Queen Qin

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity