Install MacOS with Vanilla Olarila Image, Step by Step

[MaLd0n]

1 minute ago, staycalm said:

I don't have MacOS installed on another pc..

try one by one, first ec0 to ec, Olarila have patches, just enable it in acpi tab at boot with O key

[staycalm]

9 minutes ago, MaLd0n said:

try one by one, first ec0 to ec, Olarila have patches, just enable it in acpi tab at boot with O key

Tried them one by one... Didn't work.

[cm0270]

I had a DSDT edited on here thanks to you guys.

Problems still having:

1. Battery drain. Just running Cinebench takes up about 15-20% of the battery. The battery has dropped from 100% to 70% in the last 5 minutes. The laptop lasts with Windows 10 for 4-5 hours with no issues at all.

2. Intel HD 630 still not showing up correctly.

3. Black screen for 3-4 minutes between verbose and login screen. Sometimes it goes straight to the Apple logo and progress bar and to the login. Most of the time it takes 3-4 minutes of black screen to get there.

4. USB headphones only work with one speaker instead of both.

5. Nvidia shows up in System Information (hence an issue its not disabled).

Any help would be really, really appreciated. Everything else seems to be working fine. bluetooth, Wifi, Airdrop, Ethernet, Sidecar, etc. Just these few others issues to work out is all that is needing done. I have tried everything in my possible mind to sort these out with no luck at all. I have tried reinstalling and redoing it probably about 5 times in the last few days.

Running macOS Catalina 10.15.3 (19D76)

Runme

https://filebin.net/enjbemdex2z438uw/Send_me_MSIs-iMac.zip?t=d8uhemet

 

EFI folder

https://filebin.net/0bdj5v4752z8iv9r/Send_me_MSIs-iMac.zip?t=sdwivzkj

Thanks again.

Edited March 7, 2020 by cm0270

[cm0270]

Had to create new post to put correct links to the files.

 

Runme

https://filebin.net/0s48tge08th3ntge/Send_me_MSIs-iMac.zip?t=hbevu3to

 

EFI Folder

https://filebin.net/0s48tge08th3ntge/EFI.zip?t=hbevu3to

[MaLd0n]

16 minutes ago, cm0270 said:

Had to create new post to put correct links to the files.

i edited ur files, use same

[cm0270]

On 3/6/2020 at 9:18 PM, MaLd0n said:

i edited ur files, use same

What changes were made? I don't see any difference.

 

Am I to use the files from the same EFI folder from this location?  https://filebin.net/0s48tge08th3ntge/EFI.zip?t=hbevu3to

If so then still have the same problems.

1. Still 3-4 black screen before login

2. Graphics show Intel HD Graphics CFL CRB 1536 MB instead of Intel HD 630

3. Battery still drains.

4. System information still shows both the Intel HD 630 and Nvidia Graphics.

5. USB headphones only work with one speaker instead of both.

Thanks

[rocky_mtn]

Does anyone know how to get this RED 2.5Gb network interface working? When plugged in, it doesn't even show a network activity light. My gigabit connection is working, but I'd sure like to be able to take advantage of this 2.5Gb interface for transfers to and from my server through my 10Gb switch.

 

Edited March 8, 2020 by rocky_mtn

[rocky_mtn]

Found my answer, nevermind. Thanks anyhow!

[wingsNgravy]

Hello, Im following this guide and when I try to load OS in clover it tells me an error code: Apple NVMe assert failed. What am I doing wrong?

Im using the olarila catalina ISO.

 

[wingsNgravy]

I got that working now when I choosed debug boot. But now my problem is that when I installed macOS I accidentally had my Nvidia graphics card connected, so it froze. When I tried to do the setup again I was stuck in "DOS-enviroment" again. Why is that? Could you please help me?

[MaLd0n]

4 hours ago, wingsNgravy said:

I got

u need post a dump

[Santiago. garcía.monsalve]

On 3/8/2020 at 11:47 PM, wingsNgravy said:

I got that working now when I choosed debug boot. But now my problem is that when I installed macOS I accidentally had my Nvidia graphics card connected, so it froze. When I tried to do the setup again I was stuck in "DOS-enviroment" again. Why is that? Could you please help me?

Hi @wingsNgravy I'm having the same problem, could you tell me how you corrected it exactly? Thank you

[Santiago. garcía.monsalve]

Hi @MaLd0n 

I am having the Apple NVMe assert failed when I start the installation. I have seen that it is necessary to add the SSDT-EC file but I cannot find any guide that explains how it is added. Could you help me? Thank you. Add that I work from w10 and once mounted the image with a balena I can not access your information.

[Santiago. garcía.monsalve]

I have tried adding the file of this thread (https://www.tonycrapx86.com/threads/guide-usb-power-property-injection-for-sierra-and-later.222266/page-55#post-1728645)  in ACPI / patched but it doesn't work.

Edited March 11, 2020 by Santiago. garcía.monsalve
update 2v

[MaLd0n]

10 hours ago, Santiago. garcía.monsalve said:

I have tried adding the file of this thread (https://www.tonycrapx86.com/threads/guide-usb-power-property-injection-for-sierra-and-later.222266/page-55#post-1728645)  in ACPI / patched but it doesn't work.

avoid Tony, is a strange way

[cm0270]

On 3/6/2020 at 9:18 PM, MaLd0n said:

i edited ur files, use same

MaLd0n,

 

I asked the other day and know you are busy. What files do I use that are the same? The files in the EFI folder? I tried those with no luck. Or the files in the Runme zip file? confused.

Thanks

[rikog]

I've got a following problem with my Graphics which is RX 570 - screen turns black after "ioconsoleusers gioscreenlockstate 3". I'm using HDMI output and don't have any other cables atm. Also searched this forum a little bit and fix to that was to disable CSM in BIOS but since I don't have this setting in my BIOS - what can I do to make it work?

[MaLd0n]

3 hours ago, rikog said:

I've got a following problem with my Graphics which is RX 570 - screen turns black after "ioconsoleusers gioscreenlockstate 3". I'm using HDMI output and don't have any other cables atm. Also searched this forum a little bit and fix to that was to disable CSM in BIOS but since I don't have this setting in my BIOS - what can I do to make it work?

is a xfx card? what ur mobo? uefi mode boot?

[rikog]

17 hours ago, MaLd0n said:

is a xfx card? what ur mobo? uefi mode boot?

It's Nitro+ sapphire

Mobo: https://www.asus.com/Motherboards/P8P67/

Booting clover pendrive in UEFI

Also tried changing Framebuffers to onanico but it does not work too.

[MaLd0n]

12 minutes ago, rikog said:

It's Nitro+ sapphire

u use Olarila folder for serie 100/200/300?

[Guest Nixon]

How to get i5 4th processor inbuilt graphics work with macos catalina I believe that the graphics is intel hd graphics 4000 series. Any way to get full QE/CI.

[MaLd0n]

8 minutes ago, Guest Nixon said:

How to get i5 4th processor inbuilt graphics work with macos catalina I believe that the graphics is intel hd graphics 4000 series. Any way to get full QE/CI.

Try with InjectIntel only

[Guest Nixon]

1 hour ago, MaLd0n said:

Try with InjectIntel only

should i use weg kext and lilu kext alomg with inject intel option.

[sebastian valencia]

Thanks for your work I have already installed the mojave in my HP Omen 15-AX001LA (V7R98LA) and I have run in Runme and still I cannot solve the audio, microphone and Nvidia problems and also it does not transmit a screen that I should do more?

Send me MacBook-Pro.zip

[rocky_mtn]

Hello @MaLd0n I recently switched NIC to a Solarflare 10GbE model SFN5122F. The package installer for the driver wouldn't install saying it was untrusted which is a known issue in Catalina. I cannot figure out how to get the package installer to install. I was able however to get the NIC working just installing the kext file into EFI folder under kexts/other. The NIC is working and identified as en3 and also identifies as 10Gbase-SR on the machine. The trouble is I'm noticing some pretty bad input lag and screen flickering with this NIC installed. It does it with, or without the kext installed in the EFI folder. I wanted to upload a new sendme file to see if this is something that can be fixed?? The input lag from my mouse and keyboard and the screen flickering from the GPU (RX580) are terrible and I need to get this fixed or I will have to downgrade to Mojave on this machine.

Side note, I do have another machine running Mojave you helped me with, and the same Solarflare NIC and driver package installed perfect without a hitch and it's working marvelous with no screen flicker or input lag. Here is my newest most recent sendme file. Can you have a look please?

Here is the tinyurl link, thanks as always sir!

http://s000.tinyupload.com/?file_id=27107545959881154221

 

 

Edited March 14, 2020 by rocky_mtn