Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

[janjao]

Hello, my trackpad works, but i got the apic pin number higher than 47, do i need to fix it?

[onemanosx]

Hello, my trackpad works, but i got the apic pin number higher than 47, do i need to fix it?

yes for interrupt mode.

[janjao]

I followed the guide, everything worked well, thanks very much for the help. im trying to figure out how to do this patch on the last days, and finally achieved because of this post

[onemanosx]

I followed the guide, everything worked well, thanks very much for the help. im trying to figure out how to do this patch on the last days, and finally achieved because of this post

glad the guide worked well for you!!

[zzmagus]

Apply voodooI2C patch in clover kext to patch (read post 1)

through which application to patch?

[onemanosx]

through which application to patch?

use textedit

[zzmagus]

use textedit

does not work(

Send me MacBook-Pro-kust.zip

[onemanosx]

does not work(

of course it wont work. You did not patch clover with I2C patches nor did you implement windows emulation patch.

https://imgur.com/GmxhQuE

https://imgur.com/v8HUNqN

Use these files, reboot and generate new sendme files.

 

Archive.zip

[zzmagus]

of course it wont work. You did not patch clover with I2C patches nor did you implement windows emulation patch.

https://imgur.com/GmxhQuE

https://imgur.com/v8HUNqN

Use these files, reboot and generate new sendme files.

Archive.zip

Send me MacBook-Pro-kust.zip

[onemanosx]

[ref]zzmagus[/ref], Your voodooI2C kext is corrupt. Weird.

Download new kexts here. https://github.com/alexandred/VoodooI2C/releases. Use only voodooI2C and VoodooI2CHID kexts.

Rebuild cache and permissions.

Use terminal and type:

 

sudo kextcache -i /

 

Reboot and generate send me files.

[zzmagus]

[ref]zzmagus[/ref], Your voodooI2C kext is corrupt. Weird.

Download new kexts here. https://github.com/alexandred/VoodooI2C/releases. Use only voodooI2C and VoodooI2CHID kexts.

Rebuild cache and permissions.

Use terminal and type:

 

sudo kextcache -i /

 

Reboot and generate send me files.

Send me MacBook-Pro-kust.zip

[onemanosx]

[ref]zzmagus[/ref], Your track pad is now working in Polling mode as per kernel log and IOReg. Please confirm.

 

kernel: (kernel) VoodooGPIOSunrisePointLP::Loading GPIO Data for SunrisePoint-LP
kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Init!
kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 0
kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 1
kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 2
kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 SSCN not implemented in ACPI tables
kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 FMCN not implemented in ACPI tables
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Warning: Error getting bus config, using defaults where necessary
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found I2C device: SYNA2B33
kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x57 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode.
kernel: (kernel) VoodooI2CHIDDevice::SYNA2B33 Warning: Could not get interrupt event source, using polling instead

[zzmagus]

Please confirm

how to confirm?))

[onemanosx]

 

how to confirm?))

Use your touch pad of course.

[zzmagus]

Use your touch pad of course.

does not work correctly

1.mov

[onemanosx]

does not work correctly

Try this DSDT.aml.zip

[zzmagus]

Try this DSDT.aml.zip

did not help...

[onemanosx]

did not help...

Try replace FakeSMC+ ACPIBatteryManager with SMCBatteryManager + VirtualSMC kext.

 

sudo kextcache -i /

 

Reboot and generate new send me files with new battery kext and virtualsmc

[zzmagus]

Try replace FakeSMC+ ACPIBatteryManager with SMCBatteryManager + VirtualSMC kext.

 

sudo kextcache -i /

 

Reboot and generate new send me files with new battery kext and virtualsmc

Send me MacBook-Pro-kust.zip

[onemanosx]

 

The least you could do is tell me if there is any improvement after replacing the battery kext

[zzmagus]

The least you could do is tell me if there is any improvement after replacing the battery kext

I did not find any improvements ...

[onemanosx]

I did not find any improvements ...

Lets try Interrupt mode and see if situation improves.

 

DSDT-Interrupt.aml.zip

 

Reboot and generate new send me files.

[zzmagus]

Lets try Interrupt mode and see if situation improves.

DSDT-Interrupt.aml.zip

Reboot and generate new send me files.

The touchpad worked fine, but the settings do not open

[onemanosx]

The touchpad worked fine, but the settings do not open

I dont understand what you mean by settings do not open. No sendme file.

[zzmagus]

I dont understand what you mean by settings do not open. No sendme file.

Без названия.mov

Send me MacBook-Pro-kust.zip