Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

MaLd0n · August 4, 2020

5 hours ago, kobiandy said:

To the best of my knowledge everything works except the wifi(which is because of unsupported hardware), Ethernet and trackpad both of which I can't live with.

this folder is a mistery

u need a clean and correct renames and config

nayga73 · August 8, 2020

Morning guys,

I'm not one for asking for help, but this time I'm needing the skills of someone to get my Trackpad and Keyboard up and running.

I have a Probook 440 G5 using OC 0.6.1 i5 8th Gen KBL, I have everything else working, Bluetooth,wifi etc etc, just can't get this bloody thing up and running.

After I managed to get battery stats working, the keyboard and trackpad failed to work, so not sure if it is to do with that??If I use VoodooI2C kext or VoodooPS2 kexts, my machine fails to load

I've looked through this thread and tried the pinning and still not working, worse thing is I know the trackpad is supported!!!I'm so near, but yet so far

If someone could kindly take a look at this to see where I've gone wrong, that would be smashing

RunMe:

https://filebin.net/e2h751kz8kt72dcq

many thanks in advance

nayga73

Edited August 8, 2020 by nayga73

limeblue · August 8, 2020

Good day, I need help for my Hackintosh to enable i2c trackpad device which syna2b33. I have a Lenovo ideapad 330-15ikb i3 7th gen cpu, with intel hd graphics 620.

Attached file through Runme App: https://filebin.net/sj3abk6dqa7ow89l

MaLd0n · August 8, 2020

10 hours ago, nayga73 said:

Morning guys,

DSDT.aml.zip

5 hours ago, limeblue said:

Good day,

first u need a good folder

use only ec0 to ec and _sta rtc fix in acpi renames patch

nayga73 · August 8, 2020

1 hour ago, MaLd0n said:

DSDT.aml.zip 50.41 kB · 1 download

Hi mad0n,

I have used the patched DSDT but sadly it doesn't go past

AppleIntelpssI2CController-1 : :_notificationPublishedHandler: getChannelNumber failed

I feel like throwing the thing out of the window, but then I wouldn't have anything to tinker with

If there is anything else you can do, it's greatly appreciated

nayga73

MaLd0n · August 9, 2020

5 hours ago, nayga73 said:

but sadly it doesn't go past

u need rename embedded controller to ec or inject ec device

limeblue · August 9, 2020

20 hours ago, MaLd0n said:

DSDT.aml.zip 50.41 kB · 1 download

first u need a good folder

use only ec0 to ec and _sta rtc fix in acpi renames patch

Sorry sir I'm just a noob, what do you mean need a good folder? About that use only ec0 to ec, does it mean I will disable the others in DSDT patches in clover? and where is _sta rtc fix in ACPI, I only see Fix RTC checkbox.

MaLd0n · August 9, 2020

1 hour ago, limeblue said:

Sorry sir I'm just a noob, what do you mean need a good folder? About that use only ec0 to ec, does it mean I will disable the others in DSDT patches in clover? and where is _sta rtc fix in ACPI, I only see Fix RTC checkbox.

remove all renames and add ec0 to ec and _sta rtc fix

Quote

<dict>
                   <key>Find</key>
                   <data>RUMwXw==</data>
                   <key>Replace</key>
                   <data>RUNfXw==</data>
                   <key>Disabled</key>
                   <false/>
                   <key>Comment</key>
                   <string>change EC0 to EC</string>
               </dict>
               <dict>
                   <key>Find</key>
                   <data>oAqTU1RBUwE=</data>
                   <key>Replace</key>
                   <data>oAqRCv8L//8=</data>
                   <key>Disabled</key>
                   <false/>
                   <key>Comment</key>
                   <string>Fix Boot Stuck</string>
               </dict>

nayga73 · August 9, 2020

Hi Mald0n,

I've added in the EC patch but still freezing upon trying to boot, I have linked my EFI:- https://filebin.net/ewrmf65bblm754cl

Would you kindly take a look at this for me to make sure I have everything right?I haven't added in the patched DSDT you sent me, I have put one prior to being patched.I'm pulling my hair out

nayga73

Edited August 9, 2020 by nayga73

nayga73 · August 15, 2020

Hi MAld0n,

I've still been trying to get this trackpad and keyboard to work without success, did you get a chance to have a look at my config at all?

K/R

nayga73

MaLd0n · August 15, 2020

6 hours ago, nayga73 said:

Hi MAld0n,

compile last voodooi2c kext. have support now

ronaldocesar · August 16, 2020

On 8/15/2020 at 1:15 PM, MaLd0n said:

compile last voodooi2c kext. have support now

Hi @MaLd0n,

I have a VAIO FE14 with i3 8th gen, I already tried lots and lots of things and I can't get my I2C touchpad to work (I believe it's a Synaptics). Could you please send me the file?

RunMe: https://drive.google.com/file/d/1NEe3qjxSIZH653tlAjvzH4qJgTwbGISe/view?usp=sharing

Thanks so much!

MaLd0n · August 16, 2020

45 minutes ago, ronaldocesar said:

Hi @MaLd0n,

faz um teste com essa pasta no usb. se funcionar extrai novo sendme

https://easyupload.io/zm92bd

ronaldocesar · August 17, 2020

22 hours ago, MaLd0n said:

faz um teste com essa pasta no usb. se funcionar extrai novo sendme

https://easyupload.io/zm92bd

Obrigado pelo envio

Fiz o teste com essa EFI, porém o touchpad continua sem funcionar, conforme solicitado, extrai um novo report do RunMe:

https://drive.google.com/file/d/1lrsQE2sx307U6efZTQdWuawzp5BA9e52/view?usp=sharing

Obrigado!

MaLd0n · August 17, 2020

21 minutes ago, ronaldocesar said:

Fiz o teste com essa EFI, porém o touchpad continua sem funcionar, conforme solicitado, extrai um novo report do RunMe:

Archive.zip

ronaldocesar · August 17, 2020

38 minutes ago, MaLd0n said:

Archive.zip 43.62 kB · 2 downloads

O procedimento seria só substituir o config.plist e colocar o DSDT na EFI/CLOVER/ACPI/patched né? Infelizmente tentei aqui mas não foi ?

MaLd0n · August 17, 2020

5 minutes ago, ronaldocesar said:

O procedimento seria só substituir o config.plist e colocar o DSDT na EFI/CLOVER/ACPI/patched né? Infelizmente tentei aqui mas não foi ?

novo ioreg

ronaldocesar · August 17, 2020

12 minutes ago, MaLd0n said:

novo ioreg

https://drive.google.com/file/d/1jKrYXFhIdnKHj94NQ83CFcQfipcLbNuJ/view?usp=sharing

MaLd0n · August 17, 2020

9 minutes ago, ronaldocesar said:

https://drive.google.com/file/d/1jKrYXFhIdnKHj94NQ83CFcQfipcLbNuJ/view?usp=sharing

está full load, se o trackpad não funciona...rip

ronaldocesar · August 17, 2020

1 minute ago, MaLd0n said:

está full load, se o trackpad não funciona...rip

Puts que pena.. Obrigado!

Denisuu · August 26, 2020

Hi guys!

I migrated from Clover to OpenCore with a clean MacOS install and now the trackpad isn't working anymore.

During the install I used the pre-build Dortania SSDT-XOSI, which worked fine. After the install I replaced SSDT-XOSI with a manually made SSDT-GPIO as the guide suggested. After this the trackpad still worked so I started using a mouse, now the trackpad doesn't work anymore and I can't figure out why. I tried reverting back to XOSI, tried to remove other SSDT's and kexts that I added since it stopped working but nothing seems to solve it.

I've attached IOReg from Clover with the working trackpad and an IOreg + full EFI of my current OpenCore config. I've spent hours trying to find the problem any help would be highly appreciated!!

Files: EFI & IOreg

System-specs: Asus Vivobook N580VD

Edited August 26, 2020 by Denisuu

MaLd0n · August 26, 2020

5 hours ago, Denisuu said:

Hi guys!

post one dump

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

Denisuu · August 27, 2020

7 hours ago, MaLd0n said:

post one dump

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

Handy tool thanks!

Done the file generated is "N580VD OC.0.6.0_Debug_27AUG2020.zip" I left the Clover IOreg with the working trackpad in the same folder.

https://drive.google.com/drive/folders/1kRVh3WBHB2DflE6mg13bwNR8fN3pvM-u?usp=sharing

MaLd0n · August 27, 2020

9 hours ago, Denisuu said:

Handy tool thanks!

use it, reboot and extract new sendme. we need a clean start

Archive.zip

Denisuu · August 27, 2020

21 hours ago, MaLd0n said:

use it, reboot and extract new sendme. we need a clean start

Archive.zip 6.82 kB · 2 downloads

Haha is it such a mess!?

There might be some experimental or unused stuff in there because I'm also trying to fix sleep.

New Sendme:

https://drive.google.com/drive/folders/1kRVh3WBHB2DflE6mg13bwNR8fN3pvM-u?usp=sharing

Edit: I just realise I had to probably remove all other SSDT's. I'll do that and make a new sendme when I get home. Trackpad is working again, but it isn't showing up in settings.

Edited August 28, 2020 by Denisuu

Sign In

Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

Recommended Posts

MaLd0n

nayga73

limeblue

MaLd0n

nayga73

MaLd0n

limeblue

MaLd0n

nayga73

nayga73

MaLd0n

ronaldocesar

MaLd0n

ronaldocesar

MaLd0n

ronaldocesar

MaLd0n

ronaldocesar

MaLd0n

ronaldocesar

Denisuu

MaLd0n

Denisuu

MaLd0n

Denisuu

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity