Hackintosh Guide - Disable Discrete Graphic Card - Notebook - Nvidia or AMD

[MaLd0n]

there you go...

check if work

config.plist.zip

[rositaott]

Got stucked here [iGPU] Scheduler Throttle Cap = 100ms...then need to force shutdown, inject fake id 0x16268086 so I can boot, then got a dim display with properly loaded graphics. But after restarts still the same

verbose_img.zip

[MaLd0n]

u add 0x16268086 in config.plist tab devices?

[rositaott]

u add 0x16268086 in config.plist tab devices?

 

No.. I added from boot options> graphic injector. Fake ID. By the way I boot on safe mode using the config plist you sent, with valid id 0x16260006, graphics are perfectly loaded, but also dark display

[rositaott]

Finally!!! Got my graphics working perfectly proper brightness...thanks to you Maldon...Now if this is not so much to ask, do you have guide how to fix not working trackpad?

EDIT: Got it, have working trackpad now.

[MaLd0n]

Finally!!! Got my graphics working perfectly proper brightness...thanks to you Maldon...Now if this is not so much to ask, do you have guide how to fix not working trackpad?

EDIT: Got it, have working trackpad now.

enjoy

[rositaott]

enjoy

WIP

No VGA/HDMI Output

Brightness Button - Not working

WiFi - Not working

Any suggestion?

[MaLd0n]

HDMI u need check patch in config.plist

brightness kets u need a debug kext and apply a correct dsdt patch

wifi, need check model, intel don't work

[rositaott]

HDMI u need check patch in config.plist

brightness kets u need a debug kext and apply a correct dsdt patch

wifi, need check model, intel don't work

Thanks a lot for support, I know those are off topic question. Can I send you my send file from your runme app to help me?

[MaLd0n]

now u need a very personal files, for check what u need, one generic patch don't solve

[rositaott]

now u need a very personal files, for check what u need, one generic patch don't solve

Oh, I see...well thanks anyway, I'll try to sort it out, hope I have the skills you got on doing this , gladly found this site for direct response and not sending link for every questions

[MaLd0n]

for debug what patch keys u need use it

https://bitbucket.org/RehabMan/os-x-acpi-debug

[rositaott]

now u need a very personal files, for check what u need, one generic patch don't solve

Can you make video for that

[MaLd0n]

install debug.kext in l/e, reboot, press key down brightness and run in terminal, log show | grep -i acpidebug, after, press up key and run again, check what keys u need patch

[rositaott]

install debug.kext in l/e, reboot, press key down brightness and run in terminal, log show | grep -i acpidebug, after, press up key and run again, check what keys u need patch

This is the output, what should I do next?

[MaLd0n]

for install, run it, reboot, press key down brightness and run in terminal, log show | grep -i acpidebug, after, press up key and run again, check what keys u need patch

https://Olarila.com/files/Utils/RepairPermissions.zip

[rositaott]

for install, run it, reboot, press key down brightness and run in terminal, log show | grep -i acpidebug, after, press up key and run again, check what keys u need patch

https://Olarila.com/files/Utils/RepairPermissions.zip

Hi Maldon, is it okay to discuss here regarding mapping of brightness keys? Really appreciating your help so much, but I need more understanding about it, like how to determine what keys I need to patch and ho to execute it? I have done what you instructed but I can't figure it out

[MaLd0n]

follow instructions above and check what key we need patch, u see in log _Q11 or _Q12 or _Q16, etc

[rositaott]

follow instructions above and check what key we need patch, u see in log _Q11 or _Q12 or _Q16, etc

 

attached is the output from terminal, where can I see the log files?

this is what I've done

1.Install acpi debug kext > reboot

2.Run repair permission > reboot

3. Press down brightness key (Fn+left arrow) >log show | grep -i acpidebug, then

4 Press up brightness key (Fn+right arrow) >log show | grep -i acpidebug, and the result is from the attached file.

acpidebug.rtf

[MaLd0n]

attached is the output from terminal, where can I see the log files?

this is what I've done

1.Install acpi debug kext > reboot

2.Run repair permission > reboot

3. Press down brightness key (Fn+left arrow) >log show | grep -i acpidebug, then

4 Press up brightness key (Fn+right arrow) >log show | grep -i acpidebug, and the result is from the attached file.

need a dsdt patches, send me dsdt