Problems installing High Sierra

[LO1410]

boot with nv_disable=1 and use it for a best Nvidia Driver

I already tried installing the drivers using that, but I got the results that I indicated in the black screen image with white letters ... it does not work, I tried other different things, and everything leads me to the same path... black screen and white words:

[MaLd0n]

Take a fresh install

[LO1410]

with nv_disable=1

Something very interesting is that when I click on "About this Mac" in graphics recognizes the graphics card as "Chip NVidia 8MB" or something like that, but when in Clover Configurator I go to the "Graphics" section and activate the box "Inject NVidia" , I save the changes in the config.plist, and restart ... After restarting anyway I have to place Set NVidia to VESA because otherwise, it does not enter and the black image comes back with white words ... Good, but not I wanted to refer to that, what happens is that after marking that box "Inject NVidia" and looking in "About this Mac" it already appears in graphics: "ASUS GeForce GT 730 XXXX MB" ... but I still can not start if I do not set NVidia to VESA (nv_disable = 1), but at least I wanted to comment on this, if I do not check the "Inject NVidia" box, the Mac does not recognize my graphics card, it recognizes a "NVidia 8MB Chip".

[LO1410]

Take a fresh install

Well ... well then I will, If I have more problems I will let you know, thanks for all the help.

[MaLd0n]

Well ... well then I will, If I have more problems I will let you know, thanks for all the help.

k

[LO1410]

k

Again I tried EVERYTHING ... clean installation, changes in the BIOS ... however, I always received the same screen with the message ... I do not know what to do or what the problem is, if my graphics card is incompatible. .. or what, what remedy, I will have to remove the graphics card to my PC to use Mac, thanks for all the help you have given me. For real.

But one last thing ... now that I'm going to use Intel's integrated graphics, do I need to change the CLOVER folder and the DSDT that you made me, or can I use the same folder?

Thanks

[MaLd0n]

But one last thing ... now that I'm going to use Intel's integrated graphics, do I need to change the CLOVER folder and the DSDT that you made me, or can I use the same folder?

Thanks

use same files and injectIntel

[LO1410]

use same files and injectIntel

Now all right, I have my native resolution ... Intel hd graphics ... all right, but when I passed the CLOVER folder that you gave me, and restart the PC, when logging in and put my password, the keyboard and the mouse do not work, oh ... god, if it's not a problem, it's another, what patience ...

[MaLd0n]

run app and post one new dump here with clover folder

[LO1410]

run app and post one new dump here with clover folder

Attached files.

Now the audio on board does not work either, only the audio works through the HDMI port of the motherboard, the other native jack ports of the board, nor recognizes them, and the only way to use the PC was to eliminate the DSDT.aml of the folder.

Send me Fox's iMac .zip

[MaLd0n]

u need use my clover folder, i'll check what wrong

[LO1410]

u need use my clover folder, i'll check what wrong

I have used the Clover folder that you have given me, but when it asks for the password in the login, it does not detect me neither the mouse nor the keyboard, but if I remove the file dsdt.aml, and restart, now yes detects me the peripherals .. And as I said, it does not eject audio through the ports on the motherboard, it just ejects audio through the HDMI port on the board.

[MaLd0n]

CLOVER.zip

USE it, let me know, new SEND_ME after reboot

[LO1410]

USE it, let me know, new SEND_ME after reboot

Thank you very much for your patience and help during the entire procedure, Mr. MaLd0n.

I replaced the complete folder I had with the one you gave me, I restarted and immediately everything was fine, peripherals like the keyboard and mouse worked, and also the native audio of the motherboard ... BUT now I ran out of audio through the port HDMI on the motherboard, and before it worked properly.

But everything else works perfectly.

I also restarted and made a new dump, as you told me, attached files.

Send me Fox's iMac.zip