Jump to content

Turing Mionitor 0.6.5 | Mac driver and app for TURZX 3.5-inch additional IPS TYPE-C DIY screen


Recommended Posts

Posted (edited)

Hi, if any of you own this very popular and Windows only 3.5-inch IPS TYPE-C DIY computer monitor on AliExpress. I made software for it for macOS.

WORKS ONLY ON INTEL MACS.

Check out the graphics below.


ZrmMWsE.jpeg

Turing Monitor  0.6.5

A menu bar app that draws a 480×320 status board every second (CPU, GPU, RAM, disk, fans, network, date and time) and sends it to a Turing Smart Screen 3.5" over USB.

 

How it works

• On start the app resets the screen (it goes dark for about 3 seconds), then sends a full frame (about 1.8 s). After that only the changed parts are sent, usually in a few milliseconds.

• The image is sent straight to the screen's USB endpoint. The macOS serial port driver (/dev/cu.usbmodem…) is bypassed on purpose: it repacks the data and the screen shows garbage.

• When the Mac goes to sleep the screen is turned off; after wake the app resets and reconnects automatically.

• The app needs no administrator rights and no extra drivers.

 

Menu

• Brightness: 10–100%.

• Rotate 180°: when the screen stands upside down. The board exists only in landscape orientation (480×320); portrait is not supported.

• Board layout: Simple (load, temperatures, RAM, disk, all fans) or Advanced (adds power, clock speed, fan speed and VRAM in the CPU and GPU tiles).

• Save preview to Downloads: saves a PNG of the current board and shows it in Finder.

• Language: English (US), Polski, Deutsch, Español.

• Configuration: your own names for the processor, graphics card, disk and fans, and the choice of the CPU fan.

• Diagnostics: turn off individual readings, app log and operation trace, show logs in Finder, test pattern, reconnect the screen.

• Launch at login: starts the app automatically (keep the app in /Applications).

KAPy1UK.png    p2so3SX.png

 

6x80u9F.png    RuN1DRN.png

Quote

 

TURING MONITOR – SYSTEM REQUIREMENTS
====================================

Screen
------
- Turing Smart Screen 3.5" (revision A, "UsbMonitor"), USB VID 0x1A86 / PID 0x5722, serial number USB35INCHIPSV2.
- Other models (revision B/C, 2.1", 5", 8.8") are not supported.
- Landscape orientation only (480×320 board); portrait is not supported. The image can be rotated by 180°.
- USB 2.0 port; no driver is needed (macOS sees the screen as a USB modem, the app talks to it directly).

Computer
--------
- Mac or Hackintosh with an Intel processor (x86_64). Apple Silicon is not supported.
- macOS 13 Ventura or newer. Tested on macOS 26.7.3 Tahoe.
- Readings available without extra software on an Intel Mac: CPU load, RAM, network, disk, CPU clock and power (system IOReport counters), GPU data (AMD Radeon), NVMe disk temperature.

Hackintosh (OpenCore)
---------------------
- OpenCore: a current release. Tested with 1.0.6 (2025-10-12).
- Lilu (tested 1.7.2) – required by VirtualSMC.
- VirtualSMC (tested 1.3.8) – required; without it there are no SMC readings (CPU temperature, fans).
- SMCProcessor (from the VirtualSMC package) – CPU temperature (Intel).
- SMCSuperIO (from the VirtualSMC package) – fan speeds; needs a supported Super I/O chip (tested: ITE IT8689E).
- USB map – USBToolBox + UTBMap.kext (tested USBToolBox 1.2.0) or USBPorts.kext; the port with the screen must be mapped.
- GPU: AMD Radeon RX 5000/6000 work natively (load, temperature, power, clock, fan, VRAM). WhateverGreen only if your GPU needs it according to the Dortania guide.
- NVMe: native driver is enough for the disk temperature (SMART); NVMeFix is optional.
- SMBIOS: any suitable for your hardware (tested MacPro7,1).

Not required
------------
- Administrator rights, additional drivers or kexts for the screen, Python, libusb.
- Special permissions: logs go to ~/Library/Logs/TuringMonitor (no prompt). Only saving a preview or the requirements to Downloads may ask once for access to the Downloads folder.

Logs
----
- App log: ~/Library/Logs/TuringMonitor/TuringMonitor.log. It is overwritten at every start and only a few lines per minute are written (connection, errors, settings changes). On by default; it can be turned off in Diagnostics → Write app log.
- Operation trace: TuringMonitor_trace.log in the same folder. It records every single operation (each sensor reading, each block of the image sent to the screen) and forces every entry onto the disk (fsync), so after a hard system freeze its last line shows what the app was doing at that moment. At the next start the previous trace is kept as TuringMonitor_trace_previous.log. The file is limited to 4 MB, then it starts over.
- The trace writes to the disk a dozen or more times per second – running 24/7 that adds up to several GB of writes per day and needlessly wears the SSD. That is why it is off by default; turn it on (Diagnostics → Write operation trace) only to investigate a freeze, then turn it off again.
- Why ~/Library/Logs: it is the standard macOS location for logs and needs no permission. Desktop, Documents and Downloads are protected by macOS (since 10.15) – an app writing there must first get the user's consent, and if it is refused, the log would silently stop working. Logs can also be viewed in the Console app; Diagnostics → Show logs in Finder opens the folder.
- Saving a preview or the requirements to Downloads are manual actions; on another computer macOS may ask once for access to the Downloads folder.

Tips
----
- Do not share the screen's USB 2.0 hub with devices that keep disconnecting and reconnecting (e.g. a faulty Bluetooth dongle).
- The app is signed locally (ad hoc) and not notarized by Apple, so on first launch macOS blocks it. Open it once, then go to System Settings → Privacy & Security and click "Open Anyway" (on macOS 13–14 right-click the app → Open also works). This is needed only once.

 


HOPE YOU ENJOY IT! 

CzErWuS

TuringMonitor_v0.6.5.zip

Edited by czerwus
Correct image Embeding

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...