Hackintosh Guide - El Capitan / Sierra / High Sierra / Mojave / Catalina on LGA 775 mobos with Clover Bootloader

[twellman]

Could use a little help, I'm on sierra 10.12.6. Sleep works, but it gets stuck when I restart. Shutdown works fine though.

Send me Tods-iMac-3.zip

[wapophis]

Hi im trying yo install the high sierra image, but after install, but when booting from USB the third time to install clover un my hd, and before MacOS configuration process like idioma, keyboard etc, the system reboots.

One note os that usb keyboard os disabked after the boot Olarila screenshot appears.

My mobo is a p5q3 Deluxe with a dual Core 8500 And 4 gb of DDR3.

Thanks in advance.

[MaLd0n]

Could use a little help, I'm on sierra 10.12.6. Sleep works, but it gets stuck when I restart. Shutdown works fine though.

DSDT.aml.zip

USE FLAG -no_compat_check and smbios iMac10,1

Added in 36 seconds:

Hi im trying yo install the high sierra image, but after install, but when booting from USB the third time to install clover un my hd, and before MacOS configuration process like idioma, keyboard etc, the system reboots.

One note os that usb keyboard os disabked after the boot Olarila screenshot appears.

My mobo is a p5q3 Deluxe with a dual Core 8500 And 4 gb of DDR3.

Thanks in advance.

try install in safe mode

about usb, try other port

[twellman]

Should I just add that flag and change my smbios on my current config.plist in clover? Or do I use the CLOVER.LGA775 folder that was on the page to download, also do I add the DSDT.aml that you posted on this reply?

[MaLd0n]

Should I just add that flag and change my smbios on my current config.plist in clover? Or do I use the CLOVER.LGA775 folder that was on the page to download, also do I add the DSDT.aml that you posted on this reply?

yes

let me know if work

iMac10,1 for good power management, and -no_compat_check for unsupported smbios in new system

[reincarnate]

use VID to IGPU patch

5649 445f

49475055

How I can use VID to IGPU patch ? This is my first hackintosh I don't know how to do it.

[twellman]

I followed the guide and did what you said, system boots, everything is working, sleep is working, shut down is working but it will not restart, it shuts off usb, video, lan but fans stay running and just sits that way until I hard shut down. Do I need to change my bios setting to c states enabled? (Processor Power Management Select the Power Management desired:Enabled C states and GV1/GV3 are enabled.C States Only GV1/GV3 are disabled.GV1/GV3 Only C states are disabled. (Default value)DisabledC states and GV1/GV3 are disabled.) Right now my setting is GV1/GV3 Only C states are disabled

[MaLd0n]

How I can use VID to IGPU patch ? This is my first hackintosh I don't know how to do it.

just add in config.plist, acpi tab

Added in 1 minute 5 seconds:

I followed the guide and did what you said, system boots, everything is working, sleep is working, shut down is working but it will not restart, it shuts off usb, video, lan but fans stay running and just sits that way until I hard shut down. Do I need to change my bios setting to c states enabled? (Processor Power Management Select the Power Management desired:Enabled C states and GV1/GV3 are enabled.C States Only GV1/GV3 are disabled.GV1/GV3 Only C states are disabled. (Default value)DisabledC states and GV1/GV3 are disabled.) Right now my setting is GV1/GV3 Only C

send me files

[twellman]

Here you go, and thanks too!

Send me Tods-iMac-3.zip

[MaLd0n]

Here you go, and thanks too!

DSDT.aml.zip

[twellman]

That didn't fix the restart problem, but hey, everything else works ok.

[MaLd0n]

That didn't fix the restart problem, but hey, everything else works ok.

extract new SEND_ME

[twellman]

here's a new run me file.

When I hit restart, usb, video and lan turns off and it just hangs there with just fans on. I have to hard shut down, then power back up.

Send me Tods-iMac.zip

[MaLd0n]

here's a new run me file.

When I hit restart, usb, video and lan turns off and it just hangs there with just fans on. I have to hard shut down, then power back up.

DSDT.aml.zip

take a shot

[wapophis]

Still in problems with the usb in the boot loader, i only can use the mouse. I'll try diferents usb config, but not working. Can i activate the safe mode without keyboard using the boot loader?.

To be clear, the install process finish without any problem, it's seems to be related to the first boot after install, i'll try to catch the panic but the system reboots.

[MaLd0n]

Still in problems with the usb in the boot loader, i only can use the mouse. I'll try diferents usb config, but not working. Can i activate the safe mode without keyboard using the boot loader?.

To be clear, the install process finish without any problem, it's seems to be related to the first boot after install, i'll try to catch the panic but the system reboots.

rec

[twellman]

No change.

[MaLd0n]

No change.

all patches is done, essential, cosmetics, etc, check bios config

[twellman]

Will do, thanks for all of your help.

[wapophis]

Finally i record the stack trace, and seems to be a kernel panic because of the ati radeon 4850. I case of the problem of clover with the usb is because of a bug with the g11 keyboard manufactured by logitech.

When i start using de safe mode it boots.

[MaLd0n]

IDK about ths radeon, many time my 4850 die xD

[wapophis]

DK about ths radeon, many time my 4850 die xD

 

Finally working spoofing the id of the Graphics card, using the fake id 0x944a1002,enabling the load video bios option and the inject ati option.

Thanks

[MaLd0n]

Finally working spoofing the id of the Graphics card, using the fake id 0x944a1002,enabling the load video bios option and the inject ati option.

Thanks

nice

enjoy

[ford2201]

please help build from the whole computer for LGA775 with high sierra update MOJAVE very please for hardware administration exactly has a DDR2 frame

Added in 23 seconds:

MOBS: GA-G31M-S2L

[MaLd0n]

Use clover folder lga775, stay in high sierra if ur processor have a sse4.1