Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[priyansh.pj]

.

Edited October 31, 2019 by Guest

[MaLd0n]

[ref]priyansh.pj[/ref], https://Olarila.com/forum/viewtopic.php?f=51&t=10412

[priyansh.pj]

can you please guide me step by step

[MaLd0n]

[ref]priyansh.pj[/ref], https://Olarila.com/forum/viewtopic.php?f=50&t=8685

[priyansh.pj]

it started giving error SATA Warning :Enable auto activate failed

[fallen00sniper]

@MaLd0n I did the Catalina update and my USB ports started to act up, I added the new 15 port patch to my config, still has the same issue.

used Hackintool to map the ports, on the back of my hack I have 4 usb3 and 2 usb2, front from the first usb header I have 2 usb2.

they all tell me device needs power, when mapped the back usb2 stop working, but the fronts work fine, I checked they are marked usb2.

in Hackintool I see eh01, eh02, xhc, ehc1 (it is renamed in my config to eh01 so a bit confused here).

not sure what the deal is, using the config directly from this thread with no issues until Catalina.

let me know how you would like me to proceed with runme or a ioreg, I can revert back to before the Catalina port fix and I've already removed the ssdt's and kext Hackintool created.

[MaLd0n]

[ref]fallen00sniper[/ref], check here for native usb

https://Olarila.com/forum/viewtopic.php?f=28&t=14040

https://Olarila.com/forum/viewtopic.php?f=28&t=10171

[fallen00sniper]

viewtopic.php?f=28&t=10171

 

Looked at the desktop guide, isn't this what Hackintool is doing?

I haven't installed the SSDT or kext files, because I know what happens is I lose the back USB2 ports.

Screenshots are what Hackintool shows me, the other zip is what it exports.

Screenshots.zip

SSDT_Kext.zip

[MaLd0n]

[ref]fallen00sniper[/ref], serie 8+ don't use ehci devices, need kill it and put all usb inside xhc device

[fallen00sniper]

fallen00sniper, serie 8+ don't u

 

So my config is wrong??

I’m using the same patches eh01 -> eh1 or am I misunderstanding?

I’m not sure how to go about doing the patches even from the guide, can you elaborate a little?

[MaLd0n]

[ref]fallen00sniper[/ref], post files

--Run_Me

RunMe.app

[uran0s]

Bom dia MaLd0n,

Desde que actualizei para o Catalina que o sistema acorda do sleep inesperadamente. Às vezes aguenta-se algumas horas em sleep, outras acorda de 5 em 5m. Outras acorda e desliga passado 1m, outras acende mesmo os monitores.

Como poderei descobrir o que se estará a passar?

Inicialmente vi que tinha o proximitywake activo, já meti em 0 e continua a acontecer o mesmo.

Na consola em Mac Analytics Data, aparece:

powerd

Subsystem com.apple.powerd.proximityWake

Activity ID: -- Thread ID: 0x0 PID: 87

com.apple.message.domain: com.apple.powerd.proximityWake

com.apple.message.__source__: SPI

com.apple.message.darkwake2hidactivityonac: 0

com.apple.message.darkwakeonaccnt: 0

com.apple.message.darkwake2hidactivityonbatt: 0

com.apple.message.darkwakedurationonac: 0

com.apple.message.darkwakedurationonbatt: 0

com.apple.message.darkwakeonbattcnt: 0

com.apple.message.darkwakesnouseractivityonac: 0

com.apple.message.darkwakesnouseractivityonbatt: 0

com.apple.message.darkwakeswithuseractivityonac: 0

com.apple.message.darkwakeswithuseractivityonbatt: 0

SenderMachUUID: A7079937-F09A-3FC6-AADE-C3F2524432E1

Os settings para power management estão assim:

uran0s-macpro:~ uran0s$ pmset -g

System-wide power settings:

Currently in use:

autorestart 0

Sleep On Power Button 1

halfdim 0

hibernatefile /var/vm/sleepimage

proximitywake 0

powernap 0

networkoversleep 0

disksleep 10

sleep 45 (sleep prevented by mds_stores, mds)

hibernatemode 0

ttyskeepawake 0

displaysleep 45

womp 0

Envio em anexo o resultado do ficheiro runme.app

Obrigado, desde já.

uran0s.zip

[MaLd0n]

[ref]uran0s[/ref], DSDT.aml.zip

desativa o hibernate com o .command e desativa wake from lan em preferencias do sistema e no bios tb

[uran0s]

desativa o hibernate com o .command e desativa wake from lan em preferencias do sistema e no bios tb

Já estava desactivo na bios e no sistema. Reforcei ao desactivar no terminal "sudo pmset -a hibernatemode 0" e troquei o ficheiros para o DSDT.aml que enviaste novo. Alteraste alguma coisa?

Obrigado desde já.

Dou novidades assim que verificar o resultado.

[MaLd0n]

[ref]uran0s[/ref], "Despertar para Acesso da Rede" está desativado em opções de economia?

[uran0s]

uran0s, "Despertar para Acesso da Rede" está desativado em opções de economia?

Está sim.

[uran0s]

uran0s, "Despertar para Acesso da Rede" está desativado em opções de economia?

Continua a acordar.

Em preferencias do sistema>sobre>network>wifi encontrei o seguinte:

Wake On Wireless: Supported

AirDrop: Supported

AirDrop Channel: 44

Auto Unlock: Supported

Status: Connected

Têm como desactivar o WOL para o wireless? Será daqui?

[MaLd0n]

[ref]uran0s[/ref], deve ser, tem de ver se a injector tem essa opção

[fallen00sniper]

fallen00sniper, post files

--Run_Me

RunMe.app

 

i got runme from the Olarila app, not sure if it is the same one, but it is stuck trying to use ioreg... i'll download the one you linked and see if there is a change.

it didn't want to get the ioreg, so I saved it and copied from /tmp send_me and added it to the folder, hopefully it is complete.

https://drive.google.com/file/d/1WuBrEReNOLyfT7KkJ9lmsej9I2_qryz-/view?usp=sharing

[prashant]

Hi,

I am facing error while installing Catalina on pcie nvme .

During installation when installation about to complete 2 min before system restarts and post restart clover don't show the newly installed drive.

Please need your help as this is my first time to install on nvme.

[MaLd0n]

[ref]fallen00sniper[/ref], CLOVER.zip

 

Added in 2 minutes 33 seconds:

[ref]prashant[/ref], what nvme u use?

[prashant]

MaLd0n

I am using KingSpec PCIe NVMe 2280/2242 1 TB size.

M.2 Slot.

[MaLd0n]

[ref]prashant[/ref], some ppl use it and work good

[prashant]

MaLd0n

Sorry it was my mistake , i was selecting wrong option in CBM screen.

I am able to complete pre installation and final installation.

Only remaining is to install clover boot loader on NVME drive to remove pen drive dependency.

Thanks for your prompt reply.

[fallen00sniper]

fallen00sniper,

CLOVER.zip

(2.69 MiB) Downloaded 2 times

 

seems to be running much better now, the USB ports are working as they should.

here's another runme to confirm.

https://drive.google.com/file/d/1plGu6B4unyU9tzn94WKJDYMD_61e4Id0/view?usp=sharing