xhajal Posted January 25, 2019 Posted January 25, 2019 MaldOn, Please help me to make my hackintosh run faster. The link is: https://drive.google.com/file/d/1uakjdEI7RzWAfBXZNQFEGknXD_l3Dfte/view?usp=sharing Thank you for your help. Regards, Shajal
Administrators MaLd0n Posted January 25, 2019 Author Administrators Posted January 25, 2019 [ref]xhajal[/ref], DSDT.aml.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 26, 2019 Posted January 26, 2019 Hi Mald0n, please, if you can help me. Although the system quite well, I have a problem that prevents me from working with it and I do not give with the solution. The HDMI output does not work. The rest, the sound that is low, is not too important, although yesterday you followed your video on two occasions, but when the modification of the DSDT is reached, it is not done. Thanks! Send me MacBook-Air-de-Javier.zip
Administrators MaLd0n Posted January 26, 2019 Author Administrators Posted January 26, 2019 [ref]duru[/ref], try a native audio CLOVER.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 27, 2019 Posted January 27, 2019 Good morning Mald0n. I have replaced the Clover folder that you send me in full, including the DSDT that is inside the clover folder. The result is as follows: Audio has stopped working. It does not recognize any device. Touchpad has stopped working. HDMI: Still not working This is important for me. Battery indicator: A started to work. I hope that when you can help me, I will not touch anything in principle, I prefer that you can guide me. Thank you very much again. Send me MacBook-Air-de-Javier.zip
Administrators MaLd0n Posted January 27, 2019 Author Administrators Posted January 27, 2019 [ref]duru[/ref], use ur old config -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 27, 2019 Posted January 27, 2019 But, then how do I do it with the clover folder that you sent me? I leave the config.plist that you send me? And the DSDT that you send me? Please explain, I do not understand.
Administrators MaLd0n Posted January 27, 2019 Author Administrators Posted January 27, 2019 [ref]duru[/ref], if don't work for u, use ur old config -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 27, 2019 Posted January 27, 2019 Mald0n, I do not understand why you send me the Clover folder then. All my old configuration including the DSDT I have taken from other forums, but I trust that you can help me to leave the equipment more in tune. Is your help possible to start the HDMI? Of course, once you get it, do not doubt that the effort will have a few beers of reward.
Administrators MaLd0n Posted January 27, 2019 Author Administrators Posted January 27, 2019 [ref]duru[/ref], hdmi check rehabman kexts https://bitbucket.org/RehabMan/os-x-fake-pci-id -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 27, 2019 Posted January 27, 2019 duru, hdmi check rehabman kexts https://bitbucket.org/RehabMan/os-x-fake-pci-id Thank you. But, the graphic card that I have is HD4000, so I see this ketxs, it is for graphics card from the HD4200.
Administrators MaLd0n Posted January 27, 2019 Author Administrators Posted January 27, 2019 [ref]duru[/ref], read topic, work for many cards -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
Superlicin Posted January 28, 2019 Posted January 28, 2019 As normal laptop, there will be 2 graphics card, But the problem for my laptop is, due to the engineering of the motherboard, the IntelHD is unusable. So even in Windows, it will run 100% all the time using Nvidia GPU which is Nvidia GT650M. My hardware intel i7 3630QM, 8GB ram, 120gb ssd. My past problem with Hackintosh, I could not even passed the apple boot logo as my screen will turn black, my gpu fan will spinning wildly, and then the computer turns off. Already tried with many boot flags but no luck till now. I know the problem since I lack IntelHD gpu to start the installation as usually people will Install OSX using intelhd, and proceed with their Nvidia/AMD gpu after the installation success (post installation process) So my question is: 1) Is there any way to install OSX to my laptop through Nvidia GPU not IntelHD? Thank you in advance
Administrators MaLd0n Posted January 28, 2019 Author Administrators Posted January 28, 2019 [ref]Superlicin[/ref], if u can disable intelHD in bios, yes, if not, no is a optimus? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 29, 2019 Posted January 29, 2019 Hello, Mald0n, I finally have not managed to operate the HDMI of the Latitude E6530 after many hours, it's a shame, but I think it's too high a level to be able to obtain it. I am with a DELL OPTIPLEX 3020 desktop computer that is a bit lower, but it seems that everything will be easier. Attached the file RunMe, the computer is a little slow, I do not work sleep mode and turn off the computer I get the message from the screen that you attached. The rest Ok Please, can you help me with the DSDT, thanks!! Send me iMac-de-Javier.zip
Administrators MaLd0n Posted January 30, 2019 Author Administrators Posted January 30, 2019 [ref]duru[/ref], No idea about HDMI in ur config, check if Rehabman kexts work https://bitbucket.org/RehabMan/os-x-fake-pci-id -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 30, 2019 Posted January 30, 2019 No, I told you that I'm trying it on a new computer, and I almost have it ready, you have the runme two messages back
Administrators MaLd0n Posted January 30, 2019 Author Administrators Posted January 30, 2019 [ref]duru[/ref], u have a full dsdt patched in send_me above -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
duru Posted January 30, 2019 Posted January 30, 2019 Thank you very much Mald0n !! Forgive me asking so much, but I am very new: I copy the DSDT.aml and all the SSDTs and paste them into the ACPI-Patched folder Do I have to do the same with the config.plist file? There is a file with more data in the root of the folder.
Administrators MaLd0n Posted January 30, 2019 Author Administrators Posted January 30, 2019 [ref]duru[/ref], man, use Olarila clover folder for ur chipset + dsdt + ssdt PM -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
achill3 Posted January 31, 2019 Posted January 31, 2019 HI, Please your help it's need for my second installation of High Sierra on my PC. I had Intel HD Graphics 3000 and for my first boot it's was black. After some research on web i modify FakeID to 0x12345678 and the screen come back again and installation finished. But my problem I dont have sound, resolution it's bad. Please help me to get this pc works. Send me MacBook-Pro-de-Achille-DAMA.zip
Administrators MaLd0n Posted January 31, 2019 Author Administrators Posted January 31, 2019 [ref]achill3[/ref], hd 3000 is native, first try without nothing -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
achill3 Posted January 31, 2019 Posted January 31, 2019 Sorry [ref]MaLd0n[/ref], I tried but it's same. Added in 2 minutes 22 seconds: After verbose, i don't get screen login and my touchpad freeze
Administrators MaLd0n Posted January 31, 2019 Author Administrators Posted January 31, 2019 [ref]achill3[/ref], check if it work for u https://www.insanelymac.com/forum/topic/335018-hackintool-v180/ -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now