Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[MaLd0n]

[ref]muthanae[/ref],

">

[duru]

Hi friend. First of all, thank you very much for the great work done for all of us. Sorry for my English.

I have a Dell Latitude E6530 with Optimus graphics card (NVIDIA®NVS ™ 5200M and Intel HD400) and screen resolution: (1920x1080)

I have tried to install several times with Oralila High Sierra and Oralila Mojave. On all occasions, once the computer is restarted for the first time, doing the installation, it hangs on the block.

I do not know if this is where I can ask for your help.

Count on my contribution, again thank you very much.

[MaLd0n]

[ref]duru[/ref], post one photo

[decat]

Hi,

First of all, thanks for your massive work.

After getting an almost new pc I was figuring out what to do with the old one.

I've been reading and trying for a week orso but since I stumbled on your site everything sped up!

Since today I got High Sierra running on a 2500k, Asrock Z68 board with integrated graphics.

The goal is to use it for Traktor & Rekordbox (DJ programs)

In attach my zip file, dineros will follow soon.

Thx in advance.

edit: nevermind my request, there seems to be something wrong with my boot. It's requesting the usb stick again and I'm sure it didn't last night.

Send me DESKTOP-GJ7UFF9domain.zip

[duru]

duru , publicar una foto

Thanks MaLd0n.

Please, tell me what you need so you can help me.

As I was saying, the installation of High Sierra with Olarila's image starts correctly, but after the first restart, the first screen starts to appear and after the apple leaves the progress bar below is blocked without starting. Thanks again.

[MaLd0n]

[ref]decat[/ref], DSDT.aml.zip

 

Added in 41 seconds:

[ref]duru[/ref], what ur hardware?

[duru]

duru, what ur hardware?

Dell Latitude E6530

INTEL®_CORE_I5-3320M_CPU_@_2.60GHZIntel®

Mobile DualCore Intel Core i5-3320M, 3100 MHz (31 x 100)

Alias de la CPU Ivy Bridge-MB

Ram: 16489 MB

Graphics (optimus):

Intel HD Graphics 4000

nVIDIA NVS 5200M (Dell) Video Adapter

Intel 82579LM Gigabit Network Connection

Intel Panther Point PCH - USB 3.0 xHCI Controller

Intel Panther Point PCH - USB 2.0 EHCI Controller #1

Intel Centrino Ultimate-N 6300 AGN 3x3 HMC WiFi Adapter (Dell)

Dell Wireless 380 Bluetooth 4.0 Module

Intel QM77 Chipset - LPC Interface Controller [C1]

HD Thoshiba 500 Gb

I'm doing the first installation with a normal mechanical HD and when everything is ok I'll go to an SSD Thanks for everything.

[MaLd0n]

[ref]duru[/ref], u use config2.plist inside Olarila image?

[duru]

duru, u use config2.plist inside Olarila image?

Yes, I used config.plist and config2.plist

In both configurations the installation is hung in the same place, when the restart occurs after starting the installation and the apple appears. Any information you need to help me ask me, please.

[MaLd0n]

[ref]duru[/ref], u need some test like install with -x(safe mode)

[duru]

u need some test like install with -x(safe mode)

Could you guide me in this a bit, please? Thank you.

[MaLd0n]

[ref]duru[/ref], press barspace in Clover boot screen and u see some options

[duru]

duru, press barspace in Clover boot screen and u see some options

 

I managed to start it at the end -t in the first line, I really do not know what I did, but it starts!

It's slow, can you help me? I execute runme?

Edit:

Finally I restarted and did not start again. I have started in safe boot mode and boot perfectly.

I look forward to your instructions to follow and again thank you.

Edited January 23, 2019 by Guest

[MaLd0n]

[ref]duru[/ref], yes

[duru]

duru, yes

 

I must install clover on my hard drive, right?

I have no sound, no touchpad, neither wifi, but I do not know if it is possible that it works

Send me MacBook-Air-de-Javier.zip

[decat]

decat,

DSDT.aml.zip

 

Thx, but I must be doing something wrong, or something is not right.

I tried like ten installs etc already. As soon as I unplug the USB stick it boots directly to the bios.

What I do:

1, Install from stick. Tried two different ones, your High Sierra imaged burned with win32diskimager on one stick and another stick done with Etcher.

2. Boot in OSX.

3. Install Clover.

4. Mount EFI in Clover Configurator.

5. Copy contents of Clover Chipset folder to EFI/Clover folder.

6. Copy your DSDT file to patched folder.

Is this the normal procedure or am I missing something?

Thx in advance.

[MaLd0n]

[ref]duru[/ref], DSDT.aml.zip

USE SEARCH AND CHECK DRIVER FOR ALL UR HARDWARE

Added in 15 seconds:

[ref]decat[/ref], Correct

[decat]

Think I got it sorted, I made an error while installing Clover. Will continue tomorrow to see how it goes.

[duru]

UTILICE LA BÚSQUEDA Y COMPRUEBE EL CONTROLADOR PARA TODO EL HARDWARE UR

Hello again friend. I'm sorry to be so insistent on solutions. I'm moving forward little by little.

It works for me and it starts Ok, without needing to start it in safe mode, it was the Optimus problem that I had to disable the Nvidia card in the boot.

I think I have correctly included the DSDT, calling it DSDT2 and making it from clover that I take it.

I still can not get the sound to work, Wifi and touchpad, could you help me when it's possible? I attach the new runme file.

Thank you.

Send me MacBook-Air-de-Javier (1).zip

[MaLd0n]

[ref]duru[/ref], u need check what ur audio codec, what wifi card and what touchpad u have

use DPCIManager

touchpad in ur case is just a correct kext