Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[hackadventure]

My system info: [*]Motherboard: GA-H81M-S; Processor: G3240; RAM: 6GB; GPU: NVidia GT-710 1GB HDMI port connected to monitor.

I replaced files in my USB with yours as instructed. On booting from the USB the screen stops at:

 

VoodooPS2Mouse: Version 1.8.25 starting on OS X Darwin

 

I waited to see what would happen and I got garbled text on the screen and the No Entry sign in the center of the screen. How do I overcome this?

[MaLd0n]

[ref]hackadventure[/ref], post one photo

[popo]

MaLd0n it's for a last version of high Sierra 10.13.6, on Asus P8Z77-v Deluxe I7 ivybridge, 24go ddr3, hd 4000.. thank you

 

Send me Macs-iMac.zip

[hackadventure]

post one photo

Sure, I came to read more on this and found you had answered. I am really happy for this quick reply. Thank you MaLd0n. I changed the DSDT.aml to DSDT02.aml in config.plist in CLOVER folder on USB.

Added in 25 minutes 35 seconds:

post one photo

[MaLd0n]

[ref]popo[/ref], DSDT.aml.zip

 

Added in 26 seconds:

[ref]hackadventure[/ref], u have extra kexts in folder system, L/E or S/L/E

[popo]

maLd0n thank you !!!!

[sshafidh]

lenovo y530 150ch

intel ci7 8th gen

4g nivadia and intel uhd630

Added in 7 minutes 59 seconds:

Installation successful

There is a problem with boot, sound and wifi

by sshafidh » 02 Dec 2018, 12:20

lenovo y530 150ch

intel ci7 8th gen

4g nivadia and intel uhd630

[MaLd0n]

[ref]sshafidh[/ref], u need check what ur hardware

[zeltml01]

Audio not working, using usb wifi since mine is not supported.

Added in 15 minutes 50 seconds:

I take that back voodoo works now.

Added in 1 minute 45 seconds:

but only headphones?

Send me Matthews-MacBook-Pro.zip

[MaLd0n]

[ref]zeltml01[/ref], DSDT.aml.zip

-Audio

">

-Battery

https://bitbucket.org/RehabMan/os-x-acpi-battery-driver

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

[hackadventure]

[ref]MaLd0n[/ref], I don't think I understand what

L/E or S/L/E

is and I can only access the clover partition on windows not the installation partition which is hfs partition.

[MaLd0n]

[ref]hackadventure[/ref], block kexts in clover folder, press barspace, block kexts, inside clover/kexts/others folder

boot into system and remove

[hackadventure]

[ref]MaLd0n[/ref], I have a HFSExplorer in Windows and I understood what L/E and S/L/E is. It is Library/Extension and System/Library/Extension folders that have *.kext in them. So how do I remove or block so many of them? I found the VoodooPS2Controller.kext that was stopping my progress into the install in the clover/kexts/others folder and removed it. I am doing all this on one PC so I have to boot and reboot so many times.

[MaLd0n]

[ref]hackadventure[/ref], if u have hackintosh kexts in l/e or s/l/e, block kexts in clover/kexts/other in clover, press barspace in clover boot screen

[hackadventure]

[ref]MaLd0n[/ref], I changed the contents of clover folder with the one you provided at the beginning of this post i.e., on pg one. So on press barspace I get the kexts that is set. So, according to your instructions I just press barspace in clover screen and unselect the ones pre-chosen, right? There is an option to boot without selected kexts. I even chose that option but I still could not get to the install screen.

[hackadventure]

boot into system and remove

the thing is I am still struggling with getting to the install screen on booting from USB. Even after removing kexts from /L/E folder on USB and the clover/kexts/others folder. It still comes to the

VoodooPS2Mouse:

part and stops.

[artemis79]

Dear sir,

I have successfully installed Mojave (10.14.1) on my rig. It is working almost perfect for a week or so. The only concern is Sleep/WakeUp. When the system entered sleep mode, it never wake up and I am looking for a solution these days. If possible, would you please review my current settings and give me some advices if any.

M/B : Asus Sabertooth X79 / BIOS 4701 with MSR (0xE2) unlocked

CPU : Xeon E5-2630 v2

GPU : Radeon RX480

Regards,

Send me venus.zip

[MaLd0n]

[ref]artemis79[/ref], patched.zip

[artemis79]

Dear Mald0n,

Thank you so much for your help. Much appreciated!

I have replaced the original APCI/patched directory with yours and could see a bit progress. Before that, I had to push down the power button on my rig to wake up the system. But with using your modded DSDT, the system turns on (still not wake up properly though. turned on power, but nothing happens...) by hitting USB Keyboard! Seems that something is still wrong and I am trying to figure it out.

BTW, after installed your modded DSDT, all of USB2 ports were became unavailable (USB3 ports are ok). If you have time, would you please help check?

Best regards,

Send me venus-2.zip

[MaLd0n]

[ref]artemis79[/ref], test USBs

DSDT.aml.zip

[artemis79]

Dear MaLd0n,

Installed the new DSDT and confirmed that all USB2 ports woking fine! Thanks a lot for your help!

Regards,

[jikx19]

hi there,

just did a clean installation with your guide, almost every thing is fine just graphic card driver.

i am using nividia gtx 660ti, i also attached the dsdt edit file.

iMac.zip

[MaLd0n]

[ref]jikx19[/ref], need check if serie 6 nvidia work in mojave, i never test it

[DeadHans]

@MaLd0n

Hello , I've done everything ,step by step on your post but when I boot the macos installer from clover I get End Random Seed with a lot of ++++++++++++++++++++++++++++++++

I've tried using the clover configurations on the video of how to create media & also tried switching with your clover folder but nothing.

My specs are Intel Core i3-4005 U Haswell

Intel HD Graphics 4400 ,8gb Ram it is an HP Laptop

[MaLd0n]

[ref]DeadHans[/ref], try other aptio driver