Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[romanoz]

MaLdOn Thank you!

[MaLd0n]

[ref]Simania_NL[/ref], enable THUNDERBOLT and test

about video, is just cosmetic

enable TB and extract new send me

Added in 10 seconds:

[ref]romanoz[/ref],

[Saqsy]

Getting stuck at this. Tried to replace aptiomemory in clover didn't work.

Using your Olarila mojave image.

Trued both config and config2

Hp touchsmart 15-r052nr laptop

I3 4th gen

[djsova]

Wrote the extracted raw from Olarila mojave bz2 archive on my 8 gb usb via elevated Win32DiskImager (the hash dropdown was left blank, default) and tweaked the bios settings on my mobo. usb first to boot, onboard video, and i tried loading it without kexts, with kexts, every time I get the same error.

After the ++++ screen shows the scrolling text for 20 seconds, it stops at

 

@kec.Libm 1
@kec.pthread 1
@kec.corecrypto 1.0

Please go to panic.apple.com to report this panic

 

What could be the cause of this? The computer is offline and blank SSD is inside.

--- EDIT : tried disabling onboard gpu and went with the 580, also did "without kexts" boot and there's progress, installation is going on. Hopefully all will be alright, this is my first attempt at hackintosh.

------ EDIT 2 : Mojave installation finished, now I have to fine tune I guess. Thank Olarila! Everything shows up correctly in About This Mac so not sure how to spot the fixes I need. But I'll figure it out. Thanks! Obrigado!

[MaLd0n]

[ref]Saqsy[/ref], u need change some config for discovery problem

Added in 44 seconds:

[ref]djsova[/ref],

[achill3]

Hi MaLd0n

I installed High Sierra on my PC and I need ur help please.

Send me MacBook-Pro-de-Achille.zip

[MaLd0n]

[ref]achill3[/ref], DSDT.aml.zip

-Audio

">

-Battery

https://bitbucket.org/RehabMan/os-x-acpi-battery-driver

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

[achill3]

MaLd0n thank u very very much

[CyCLoBoT]

[ref]MaLd0n[/ref], could you please help me create a patched DSDT for my system? I have an Asus Maximus Gene VI motherboard. In your original post, you have mentioned a list of patches which I don't think have been implemented on my system. There are few patches that I do have in the ACPI section in the config file.

I do have some SSDTS in patched folder that were created to display device information in the PCI section of System Properties. If possible, I would like to have those merged in the DSDT if it's a feasible solution.

For USB, I have created a custom USB port kext that only requires the rename of EHCi1/EHC2 to EH01/EH02. USBInjectAll kext is not needed so that's why it's missing from the Other folder.

I am also using onboard graphics along with MSI Radeon RX 480 8GB. Without the onboard graphics, hardware acceleration is not functioning, If you know how to fix this then it would be appreciated.

Send me imac.lan.zip

[psycmos]

Já baixei 2 vezes a imagem Final do Mojave e dá me sempre o mesmo erro.

Já coloquei a pasta do clover, como anuncia no tutorial e tenho o mesmo erro:

"Esta cópia da aplicação Instalar o macOS Mojave está danificada e não é possivel usa-la para instalar o macOS".

Alguma Ideia?

 

[CamBuff]

I tried installing, once I was able to successfully install and completed Clover boot loader. But forgot to configure clover

Now retrying it but stuck at a line says:

"Please switch to XPC or bootstrap_check_in (): com.apple.bsd.dirhelper

Added in 17 minutes 20 seconds:

CamBuff, yes, work

orozcopc, https://www.insanelymac.com/forum/topic ... cher-v153/

I tried installing, I was able to complete the installation but I think some post installation error happened. I forgot to configure "Clover configurator". but I have intected GPU with the AMD GPU injector tool. When I booted it shown Kernal Panic.

Now I'm trying to reinstall again but im stuck at a line :" Please switch to XPC or bootstrap_check_in():com.apple.bsd.dirhelper"

Can you suggest what to do?

This is my spec:

Motherboard: Intel Q65 Express

Intel Core i5-2400 Sandybridge LGA1155 Socket

4GB 1333 MHz DDR3 SDRAM

250 GB SSD

PCI Express x16

AMD Radeon HD 6450 2GB

Ethernet Controller(s): Intel 82579LM

[MaLd0n]

[ref]CyCLoBoT[/ref], DSDT.aml.zip

 

Added in 32 seconds:

[ref]psycmos[/ref], use um gerenciador de download para não falhar

Added in 46 seconds:

[ref]CamBuff[/ref], use smbios iMac13,2 or iMac14,2

[CyCLoBoT]

CyCLoBoT,

DSDT.aml.zip

 

[ref]MaLd0n[/ref], do I have to make any other changes in my Clover folder or the config file?

[MaLd0n]

[ref]CyCLoBoT[/ref], use my clover folder for chipset series

[psycmos]

ja deu MaL0n, era a hora que estava mal na bios!!!

Da erro nas USB durante o verbose...

Pode dar uma ajuda no dsdt do meu colega?

Send me Mac-mini-de-DEAD.zip

[MaLd0n]

[ref]psycmos[/ref], DSDT.aml.zip

novo SEND_ME depois do reboot

[psycmos]

TOP!

Já não dá erro.

Algumas USBs não funcionam, mas se tiver que ficar assim já é bom!

Segue o novo depois de reboot.

Send me Mac-mini-de-DEAD.zip

[MaLd0n]

use iMac13,2 smbios and remove usbinjectall, try without this kext

Added in 2 minutes 41 seconds:

[ref]psycmos[/ref], correct LPC

DSDT.aml.zip

[psycmos]

Continuou igual. Agora no boot recebo erro de AppleBUSpowerController com esse SMBIOS, mas as usbs ficam iguais.

[JRRB]

Hi Guys,

I have the following specs:

Gigabyte X99 UD4

Intel i7 5820k

Gigabyte Nvidia GTX 980

32GB of Ram

Will this work on that system? Should I update my bios?