Hackintosh Guide with Clover Bootloader on Serie 5, 6, 7, 8, 9

[tsader]

enable all

 

Unfortunately that is not working either.

I have attached the EFI that works and the one that doesn't if that's ok

thx

Good_EFI.zip

NOT_Good_EFI.zip

[MaLd0n]

Has anybody got this to work on the x79 chipset

some cases need a voodootscsync kext with correct iocpunumber

Added in 38 seconds:

Mas se eu colocar o kext appleALC na pasta kexts other, o audio hdmi não funciona bem

desativa o patch hdmi via bootarg

leia no site da whatevergreen

Added in 1 minute 26 seconds:

Unfortunately that is not working either.

I have attached the EFI that works and the one that doesn't if that's ok

if work, just use it

[tsader]

if work, just use it

 

I just wanted to do a clean installation using your method making sure everything runs correctly.

At the moment, for example in System Report under PCI I get the following:

[MaLd0n]

if u use my dsdt, u need disable _dsm to xdsm patch, this patch kill all

[tsader]

if u use my dsdt, u need disable _dsm to xdsm patch, this patch kill all

 

Maestro!! Nice, it worked

Should I enable/disable the rest too according to your config?

thx

[MaLd0n]

Maestro!! Nice, it worked

Should I enable/disable the rest too according to your config?

thx

my clover folder for chipset x99

CLOVER.X99.zip

but have many processors, many specific patches, this clover folder is generic

[tsader]

but have many processors, many specific patches, this clover folder is generic

 

Thank you!

And I would add the DSDT you sent me before?

[MaLd0n]

use my dsdt, check my clover folder and copy patches

[tsader]

use my dsdt, check my clover folder and copy patches

 

Is there a way to verify that everything is fully and correctly functioning?

[MaLd0n]

look at ioreg

[tsader]

look at ioreg

 

Anything in particular that I would look at?

Sorry but that's way beyond my current knowledge

[MaLd0n]

the principal is CPU PM. x86platform need stay loading

[ford2201]

ASUS B250-Plus Prime

ASUS GTX 1050TI

i7-7700K kaby lake

MEMORY 16GB

ALC887

please all clover speed yes how to patched DSDT all you and clover config.plist where add copy save EFI Others

[tsader]

the principal is CPU PM. x86platform need stay loading

 

And how would I verify that?

[MaLd0n]

look in ioreg

[srut2000]

so iam trying to get mine to boot to the installer and it gets stuck at the prohibited sign after the verbosed mode goes off on boot ive attached a screenshot of what it stops on. My motherboard is an asus x79 deluxe with an intel e5-2670 v1. and i attached a zip of my clover folder.

Any help would be really appreciated!

EFI.zip

[MaLd0n]

try other usb port

[srut2000]

Okay I changed usb ports and i got to the installer but when i try to install it says firmware update required for your mac pro poweroff to update.

[Pumba]

Pumba wrote: ↑

I believe this is for me. Is this the necessary file?

If there are any other needed files, can you, please, point me the ones needed?

Obrigado pela ajuda e desculpa

DSDT.aml.zip

(51.23 KiB) Downloaded 3 times

Obrigado pela ajuda. Só agora respondo porque estive fora

Coloquei o seu ficheiro SSDT.aml, corri o Repair.command, mas a partir de certo ponto, não consegui mais introduzir a password quando pedida

Aparentemente só o "ENTER" funciona e, depois deste, 1 ou 2 caracteres...

Não tenho trackpad, a rede por cabo não funciona e só consigo recomeçar o computador através pen Olarila utilizando o EFI.

Que fazer? Formato o disco e recomeço?

Obrigado e desculpa.

Ah, recebe aí uma cerveja de Portugal

user gigaze

Abraço

[lokey]

DSDT.aml.zip

(12.39 KiB) Downloaded 1 time

 

Thanks MaLdOn. forwarded u a couple beers. unfortunaly my kp issue on Mojave was related to broken Nvidia drivers for my GTX 680. High Sierra drivers bring back sleep but break other things. No sleep for now. Your DSDT did fix some USB issues I had with my previous DSDT. Some of those patches I havnt seen in other places. I like your mald method

[MaLd0n]

Obrigado pela ajuda. Só agora respondo porque estive fora

Coloquei o seu ficheiro SSDT.aml, corri o Repair.command, mas a partir de certo ponto, não consegui mais introduzir a password quando pedida

Aparentemente só o "ENTER" funciona e, depois deste, 1 ou 2 caracteres...

Não tenho trackpad, a rede por cabo não funciona e só consigo recomeçar o computador através pen Olarila utilizando o EFI.

Que fazer? Formato o disco e recomeço?

Obrigado e desculpa.

Ah, recebe aí uma cerveja de Portugal

user gigaze

Abraço

faz o boot pelo Olarila, remove o dsdt e extrai novamente um SEND_ME

Added in 41 seconds:

Thanks MaLdOn. forwarded u a couple beers. unfortunaly my kp issue on Mojave was related to broken Nvidia drivers for my GTX 680. High Sierra drivers bring back sleep but break other things. No sleep for now. Your DSDT did fix some USB issues I had with my previous DSDT. Some of those patches I havnt seen in other places. I like your mald method

[noyjoreb]

Greetings,

This is a good forum to learn on. Anyways, please see attached "Send me" file for HP envy 6-1080ex files. Please help me for my wifi card that is not working.

Thank you and more power... Keep up the good work.. https://www24.zippyshare.com/v/UztxuSY2/file.html

[MaLd0n]

Greetings,

This is a good forum to learn on. Anyways, please see attached "Send me" file for HP envy 6-1080ex files. Please help me for my wifi card that is not working.

Thank you and more power... Keep up the good work.. https://www24.zippyshare.com/v/UztxuSY2/file.html

DSDT.aml.zip

[AeOcampo16]

Hi. I have a problem on my Olarila High Sierra Installer. It keeps stuck at End Randomseed with too many plus. Does someone know how can I fix it? My other laptop is Lenovo G500 i3-3110m with Intel HD Graphics and 4GB of Ram.

[MaLd0n]

try with other aptio driver, is a commo problem, many drivers now