Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[MaLd0n]

[ref]minseung0119[/ref], DSDT.aml.zip

[minseung0119]

minseung0119,

DSDT.aml.zip

(40.94 KiB) Downloaded 1 time

 

Thanks.

I used this file on mojave.

I have found some problems.

1. The Sapphire RX590 Nitro + fan stops when it enters the OS. And it does not turn on. It worked normally during the OS installation process. WEG + Lilu has been updated to the latest version.

2. USB 3.0 port and USB 3.1 port do not work except 4 USB 2.0 ports.

3. I mistakenly mistakenly inserted a ThunderboltEX3 card into a PCI-E 8x slot. It is now properly installed in the PCI-E 4x slot.

 

Send me hacui-iMac.zip

acpi_origin.zip

 

when I booted Clover, I pressed F4 to attach ACPI Origin.

Attach Runme.app with no DSDT applied.

[MaLd0n]

[ref]minseung0119[/ref], about fan, it's common, if stay in low temp, fan stop, some times before enter system fan is crazy, u can try a agpm enable

--USB Fix

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[minseung0119]

minseung0119, about fan, it's common, if stay in low temp, fan stop, some times before enter system fan is crazy, u can try a agpm enable

 

Is DSDT about replacing slots in Thunderbolt cards possible to work without being created?

[MaLd0n]

[ref]minseung0119[/ref], thunderbolt dont work with "built in" inside tables, we need create one by one

[snakepit122]

MaLd0n wrote: ↑10 Mar 2019, 06:58

don't need replace clover folder inside usb stick, Olarila image have it

At first time, before I replaced CLOVER folder at USB stick I run installation and it crashed at the end shown at screen. So raw Olarila image doesn't have it

Added in 11 minutes 6 seconds:

Today I found this guide:

https://github.com/cmer/gigabyte-z390-a ... BY_STEP.md

Section: Fixing Kernel Panics at Reboot/Shutdown

Author says that NVRAM is not natively working on Z390 motherboard. I realise it is Gigabyte and I have Asus. But both are very similar Z390's motherboards.

Quote author:

When I added EmuVariableUefi-64.efi to /EFI/CLOVER/drivers64UEFI , I got a crash at bootup.

The solution to that crash is to remove AptioMemoryFix-64.efi and to replace it with OsxAptioFix2Drv-free2000.efi.

Does it make sense?

I have the same problem, the installation gets stuck 1 minute before I finish, I will try to remove AptioMemoryFix-64.efi and replace it with OsxAptioFix2Drv-64.efi, and it will not work for me, but when I change my USB 3.0 into port 2.0 the installation it ended perfectly

Asus Prime H310

Intel Core i3 8100

8GB RAM HyperX 2400mhz

Asus Rx 470 4GB Strix

[MaLd0n]

[ref]snakepit122[/ref], the best is fix it via DSDT and use aptiomemoryfix, best driver ever

[minseung0119]

minseung0119, thunderbolt dont work with "built in" inside tables, we need create one by one

 

Can you tell what the ACPI error is during boot?

[MaLd0n]

[ref]minseung0119[/ref], some is about ssdt oem, ignore it, other is about usb

extract one send_me, i'll check

[minseung0119]

minseung0119, some is about ssdt oem, ignore it, other is about usb

extract one send_me, i'll check

 

Yes I uploaded.

DSDT used the modified DSDT for the Z390 Aorus Master.

CPU : Intel i9 9900K

M/B : GIGABYTE Z390 AORUS MASTER

VGA : Sapphire RX590

Thunderbolt : ASUS ThunderboltEX3 w/CABLE

 

Send me hacui-iMac.zip

[MaLd0n]

[ref]minseung0119[/ref], use only it with last clover version

CLOVER.zip

[yumo]

minseung0119, use only it with last clover version

CLOVER.zip

Hi, MaLdon

What is RTCMemoryFixup.kext in the Kext folder?

[MaLd0n]

[ref]yumo[/ref], https://github.com/acidanthera/RTCMemoryFixup

[xXMulliXx]

Anyone have a guide for Z370M D3H?

Install Mojave but when I install clover the system does not start without the pendrive.

I followed the guide there but I can not start it from the SSD.

I've been trying to install everything well since yesterday but it's impossible, I'm about to give up

Im novice in hackintosh.

My hack:

Gigabyte Z370M D3H

i5 8400

Radeon RX 580

8Gb Ram Corsair

1xM.2 SSD Kingston

1xSATA SSD Samsung EVO (when i install MOJAVE)

Thank you

[MaLd0n]

[ref]xXMulliXx[/ref], use last bios/uefi version, if don't work, use previous version

[xXMulliXx]

Hi @MaLd0n, thanks for your help.

Finally, I have install the integrated audio and USB 3.0 work, or so I think. Sleep mode does not work. HDMI audio I don't know, don't have at this moment HDMI cable, only HDMI to DVI. I upload my config.plist to the DSDT thread to see if you can take me a hand.

Sorry for my bad English

[MaLd0n]

[ref]xXMulliXx[/ref], --Run_Me

RunMe.app

[xXMulliXx]

xXMulliXx, --Run_Me

RunMe.app

 

Yes, I read in the other post and upload my RunMe

Very thanks MaLd0n

[Jonesing]

Hi MaLd0n,

I have tried to install Olarila Mac OS Mojave on a Dell AIO 5250, with an intel i3-6100, Intel Q270 motherboard chipset, Intel HD 530 and 8Gb RAM DDR4 and I got a kernel panic.

I am new to Hackintosh, therefore I need some help. I attached the origin folder, not sure which files do you need from there. I also attached a printscreen of the kernel panic.

https://imgur.com/a/6kBS6Bu

Can you advise me how to solve this issue? Thanks in advance!

origin.zip

[Jonesing]

hi guys, can anyone help with the issue above?

thanks!

[MaLd0n]

[ref]Jonesing[/ref], DSDT.aml.zip

about video check here

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

[lolost]

Hi MaLd0n!

Could you do your magic? Please note I have plugged a geforce card but it's only in use in Windows. I will be using integrated graphics on Mac.

Thanks!

Send me Negro.zip

[MaLd0n]

[ref]lolost[/ref], DSDT.aml.zip

[lolost]

lolost,

DSDT.aml.zip

(36.25 KiB) Downloaded 2 times

 

I'm having massive graphical artifacts, just like before your DSDT. Any idea to fix this?

Thanks again for your support.

[MaLd0n]

[ref]lolost[/ref], iMac18,1 smbios