Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[MaLd0n]

[ref]amoloxo90[/ref], DSDT.aml.zip

[darktrevize]

hello my pc config its and i7 7700 processor , geforce 1080gtx gpu and a msi h170a motherboard, my instalations fails at the starts, i recive a prohibited simbol , can you help me through this, i think my bios config is ok, but somehow the installation don't run, my monitor is plugued in the native video card of the board, and i disable the gpu

[MaLd0n]

[ref]darktrevize[/ref], use other usb port, usb 2 port

[darktrevize]

same error , my pendrive is a regular 8 gb it's ok? or i need a special one?, im going to download de Olarila high sierra osx and start from the beggining again

[MaLd0n]

[ref]darktrevize[/ref], some images need 16gb, check it

[darktrevize]

i manage to install high sierra, now im getting trouble working on my nvidia 1080 drivers

Added in 16 minutes 17 seconds:

i install the pkg nvidia drivers for the high sierra version, and i think it work im running the mac osx from my nvidia 1080gtx, the hdmi sound is the problem now any guess?

[MaLd0n]

[ref]darktrevize[/ref], the whatevergreen have a hdmi patch, check there

[denisgrusz]

Hi, MaLd0n ... I just build my first hackintosh, and with your help, and great tutorial it went smoothly ... for w while

System is now booting. I create clover partition on ssd, and replace with yours clover folder (x299).

System work fine, but few things don't work ... for this time I notice - USB 3.0, WIFI (info: there is no wifi card install), Bluetooth (Not available), sleep mode don't work property (I can't wake up computer), USB-C not working(this is very important, because I have to plug-in wacom tablet), my sound card on USB generate some crackling in the speakers (maybe on USB 3.0 it will work fine)

Hardware specification:

AsRock Taiche XE x299

i9 7920x

RX 580

970 EVO 1 TB

I guess it is DSDT tune problem, so I send you file from RunMe.app

Send-me-MBP15.zip

[MaLd0n]

[ref]denisgrusz[/ref], DSDT.aml.zip

--USB Fix

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[denisgrusz]

Thank you MaLd0n for the file. I think I do something wrong.

I put your DSDT.ami file in EFI (mount) --> EFI --> CLOVER --> ACPI --> patched

but everything still not working. I read about 20 pages of this threat, but can't find any tip.

Can you tell me how to patch this DSDT file ? Maybe there is some youtube tutorial (i try to search on my own, find, but unfortuletly on video, guys change file in "origin" folder, but my "origin" folder is empty

or maybe you can send me whole "CLOVER" folder ?

I'm sorry for my poor knowledge in this matter, but on my defense I will remind that this is my first hackintosh.

Thanks for your help! I promise I don't forget buy you a beer

[onemanosx]

but everything still not working

Define "everything not working".

[MaLd0n]

[ref]denisgrusz[/ref], use our clover folder for serie x299 and DSDT

[jessen]

Hi MaLd0n, please patch dsdt for me.

Thanks for your help!!!

Send me jessenguyens-iMac.zip

[MaLd0n]

[ref]jessen[/ref], DSDT.aml.zip

[denisgrusz]

onemanosx i define it in my first post

USB 3.0, WIFI (info: there is no wifi card install), Bluetooth (Not available), sleep mode don't work property (I can't wake up computer), USB-C not working

 

MaLd0n I used yours clover for serie x299 and paste DSDT ... I do it on EFI partition, and on MacOS SSD drive in folder EFI (path I show on screenshot).

I also try to patch DSDT as you show on this video ...

">

I download MaciASL software to open DSDT.ami as you do, but no luck. File don't want to open with this software

I must doing something wrong Sorry for being such a noob

[denisgrusz]

OK. I have read a lot of post on this forum, and I think maybe I don't reboot after put your x299 CLOVER folder, and immediately start RunMe.app and send to you.

Maybe we should try again ?

What I have done this time:

- Instal Fresh Clover EFI v2.4k r4844

- Put your x299 CLOVER folder on both partition (EFI and MacOS) - please tell me ... where I exactly should put it ?

- Reboot

- Start RunMe.app

- Send you SEND ME file

Also I mention I download a "Clover Configuration", and I don't know why i cannot mount EFI partition (so if I will need to paste your DSDT.aml file to EFI partition I can't) to see EFI partition I must install once again "Clover EFI v2.4k r4844".

Also I attach photo from Clover ACPI patching menu (maybe there is some issue?)

Thanks! and sorry for post by post.

Send-me-MBP15.zip

[MaLd0n]

[ref]denisgrusz[/ref], install clover, replace folder and install clover again

[brucemen]

Hi MaLd0n,

I use usb 2.0 for making installer.

I have a problem, my pc boot from usb complete but after that, it disconnect to my display (HDMI port) so i cant install. I think problem is HDMI Port ?

Edit: add screenshot

 

Thanks for your help!!!

[MaLd0n]

[ref]brucemen[/ref], check here patch for ur gpu

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v171/

[denisgrusz]

MaLd0n I got to work USB 3.0 (thanks for link to tutorial), with wake on sleep is strange ... because once it's working, once not. I must check on windows if there is the same problem ...

Also WIFI after patching still don't working. I don't really need this ... but it will be nice to have it. Any idea where may be a problem ?