Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[MaLd0n]

[ref]chohsiao[/ref], CLOVER.zip

[chohsiao]

Thanks,But the problem is still unsolved.

And the SATA/SATA Express display Intel 10 Series Chipset,not 30 Series.

The Graphics/Displays only display rx580 ,no uhd630.

[MaLd0n]

[ref]chohsiao[/ref], serie 30 dont have support, we inject serie 10 id

IntelHD630 appears only in PCI, not in Graphics and Monitors, there appears only principal GPU, is a correct config for good hardware acceleration

[chohsiao]

Ok,I see.

The problems with usb port and sata port ,what can I do now?

When I used z97x-ud3h, hot plug was enabled in bios. The disk icon is orange and removable. Now it is just a normal icon, and hot plugging can't work.

Usb 3.0 interface, when I sleep and wake up, the orico sata docking can work, but it won't work after each boot.

[MaLd0n]

[ref]chohsiao[/ref], https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[chohsiao]

ok, Thank you.

[popo]

I MaLd0n , I'm sorry to be inconvenienced again but when I finish and I press patch FBPatcher stops and goes out, I do not see him write and can not save the config.plist, have you ever met this ?

[MaLd0n]

[ref]popo[/ref], post there, bro

[Flo Rin]

Hello, regarding setting the usb prot limit in 10.14.1. Could you please tell me what are the USR1, USR2 ports and if I can safely add them to the exclude list. My board is Gigabyte Z370N WIFI.

Thank you!

[MaLd0n]

[ref]Florin_[/ref], u can remove USR1, USR2

check here

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[Lorenzoo]

Hello Maldon. I am Lorenzo, from France. I asked you for an advice some weeks ago, about the choice of a motherboard... So it's done. I bought a B360M DS3h from Gigabyte, with an intel i3 8300 processor, and I put a rx480 4g... So everything works perfectly, exept one thing I can't manage to understand.. I have a Samsung clx 3185 printer scanner, which always perfectly worked with OSX, and since the Mojave installation, the scanner doesn't work... it always says " the scanner reported an error".. I tried different solutions I found by the the net, but nothing worked. I saw that my usb tree is only recognised as usb 3.0, could it be the source of the problem ? I really don't understand...

Once again I ask for your help !!

Thanks in advance

Lorenzo

Send me Lorenzs-iMac.zip

[MaLd0n]

[ref]Lorenzoo[/ref], hey

DSDT.aml.zip

USB fix Mojave

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[Lorenzoo]

Thanks a lot my friend, I will try this this night if I have a moment. I will tell you when I get it.

Thanks again.

Added in 34 minutes 25 seconds:

Hey again Maldon... just tried the DSDT file you send me, and the usb tree is still shown as usb 3.1 only. And the AppleALC kext doesn't work anymore, no sound. When I put the file out, the sound works again....

Send me Lorenzs-iMac.zip

[MaLd0n]

[ref]Lorenzoo[/ref], sound

DSDT.aml.zip

usb, common appears 3.1 in ur case

[manoloman]

[ref]MaLd0n[/ref], hi

A weeks ago I contact you to get my DSDT.aml patch for my notebook hackintosh. Now I installed Mojave... I'll like to know if the same patch will work?

Thanks in advance and hope everythings is fine with you.

[MaLd0n]

[ref]manoloman[/ref], mojave u need check video patch here

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v163/

[Lorenzoo]

Lorenzoo, sound

DSDT.aml.zip

(38.03 KiB) Not downloaded yet

usb, common appears 3.1 in ur case

 

Thanks a lot Maldon. I will try this later. Just one thing that I wonder since a while.. Is it useful to make a fresh install with the DSDT in CLOVER folder, or better use the DSDT in post install ?

[hellotonothing]

Good afternoon everybody ! I have a quick question about essential kexts after DSDT patching. Long story short, I have request a DSDT for my system (and thanks for that in advance), and I've noticed that after I use the DSDT, I can boot my hackintosh without any kexts on EFI\Clover\kexts\other (it simply works, and every feature besides handoff works like a charm). The main question here is, do I still need to use the kexts provided with the 300 series Folder, or should I continue to run without any custom kexts on my clover folder? Thanks!

[Baptiste94]

Hello MaLd0n, what's the best option, extracting DSDT with Clover (pressing F4 on startup) or using you runMe app ?

Also, I have a 8700k and a Gigabyte Z370 Gaming 5 with a GTX 1080Ti.

Some settings in your clover folder seem not to match my hardware like

- GFX0 to IGPU (as I don't plan to use the IGPU)

- HECI to IMEI ( I already have IMEI without patching it in IORegistryExplorer3)

- HDAS to HDEF ( already have HDEF in IORegistryExplorer3 without patching it)

So I deleted those patches and added some for my hardware. At the moment I have the following patches :

- GLAN to GIGE

- SAT0 to SATA

- XHCI to XHC (added this one)

- XCH1 to XHC (added this one)

Same for the kexts, I just kept the following kexts in the "Other" folder :

- AppleALC

- FakeSMC and FakeSMC sensors kexts

- IntelMausiEthernet

- Lilu

- USBInjectAll

- WhateverGreen

Am I right ? Should I correct something ? If possible, I would like to use only the necessary patches and kexts for my hardware.

Thanks a lot

[MaLd0n]

[ref]Lorenzoo[/ref], post install

Added in 44 seconds:

[ref]hellotonothing[/ref], have a some mandatory kexts, ever

Added in 25 minutes 23 seconds:

[ref]Baptiste94[/ref], the patches

change GFX0 to IGPU

47465830

49475055

change HDAS to HDEF

48444153

48444546

change HECI to IMEI

48454349

494d4549

change SAT0 to SATA

53415430

53415441

is mandatory, some ssdt oem have a device and need rename too

the IGPU is mandatory for good hardware acceleration, work together with NVIDIA/AMD

[pridees]

Hello [ref]MaLd0n[/ref], please help me configure my DSDT. I have some troubles with PCI devices. System report write me error.

Thank you so much!

Send me alexs-imac.zip

[MaLd0n]

[ref]pridees[/ref], DSDT.aml.zip

[Flo Rin]

Hello, in my case the Intel UHD Graphics 630 is not displayed as "Display controller" and "Build In". Do you think is OK?

Thank you very much!

[MaLd0n]

[ref]Florin_[/ref], yes, is ok too

[pridees]

[ref]MaLd0n[/ref], Thank you!!! It works!