Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[MonsieurD]

I don't know why, but my USB3 ports don't work. I think they used to work before I updated the BIOS...

I'm sending you my DSDT again (new BIOS, extracted from Linux).

I'll be sending you more :beer::beer: too

dsdt.aml.zip

[MaLd0n]

[ref]MonsieurD[/ref], DSDT.aml.zip

patch limit port usb don't work more

u need check here

https://Olarila.com/forum/viewtopic.php?f=79&t=7370

[takuha]

Dont work HDMI audio

Send me iMac-de-Hildebrando.zip

[sherwin0921]

MaLdOn,

Please fix my hack. make it almost real Mac Send me sherwins-iMac.zip

[amro-agha]

Mr. MaLd0n , how are you

Is there a solution to the problem ( still working for root device )

My Computer Specifications :

HP 280 G2 MT (non-legacy)

CPU : Intel® Core™ i3-6100 Processor

GPU : Intel® HD Graphics 530

Intel H110 Chipset

RAM : 8G DDR4

I used it Olarila High Sierra & Sierra & el capitan The same problem

[MaLd0n]

[ref]takuha[/ref], CLOVER.zip

 

Added in 6 minutes 7 seconds:

[ref]sherwin0921[/ref], CLOVER.zip

 

Added in 34 seconds:

[ref]amro-agha[/ref], u try others usb ports?

CLOVER.zip

[sherwin0921]

Good morning MaLdOn,

Thank you for the configurations it works!

You are good man!

Thanks!

[luckbacknow]

OI, I have a machine with the following settings:

Mobo: Gigabyte GAH110M-M.2

Memory Ram crustial 2400Hz 8 Gb

Inner Processor Kaby Lake Pentium G4560

With these settings I can run Mojave 10.14 very well, with some caveats.

* Video card recognized but without graphics acceleration with only 5mb Vram

* DSDT not configured

* Unrecognized pci-e x1 network card (RTL8188CE 802.11b / g / n WiFi Adapter)

Could you give me a light to improve my hack?

To do so follow the DSDT's extracted from the clover via F4, my current clover folder with kexts and plist valid so far

config.plist.zip

F4 clover DSDT EXTRACTED zip.zip

Other.zip

[amro-agha]

amro-agha, u try others usb ports?

The problem was solved, but a new problem emerged, (monitor going to sleep after boot),

Problem Think from the Graphics card, are there certain settings added to the Clover to fit your Graphics card (Intel® HD Graphics 530)

I use port VGA , Do you use the port DVI Solve the problem !

Thank you

[MaLd0n]

[ref]sherwin0921[/ref], welcome, enjoy!

Added in 16 seconds:

[ref]luckbacknow[/ref], posted in other topic, use only one

Added in 25 seconds:

[ref]amro-agha[/ref], VGA don't work

[luckbacknow]

Ok!!

[amro-agha]

VGA don't work

DVI-VGA adapter Solve the problem ?

Thank you for helping .

[MaLd0n]

[ref]amro-agha[/ref], i think no, u need test

[scrolljam]

Hello!

I want to help my friend with his Hackintosh.He is on 10.13.6 Kaby lake i7 7700 GA Z270 HD3P with nvidia 710. I need complete efi and dsdt.

Thank you so much for your great work!Send me Antes iMac.zip

[MaLd0n]

[ref]scrolljam[/ref], DSDT.aml.zip

[scrolljam]

Works great! Thanks!

[MaLd0n]

[ref]scrolljam[/ref],

[popo]

I MaLd0n,

Thanks for the DSDT patch. the graphic card seems to work with a good memory the screen is at the correct resolution but it bug, sinilla, jumps lol does not work

I boot only in hdmi black screen with the dvi..

have you 5 min to help me again. please

CLOVER.zip

[MaLd0n]

[ref]popo[/ref], u need check here

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v161/

[chohsiao]

hello Mald0n ,This is my devices list:

motherborad: asus maximus x hero wifi. (z370);

cpu:intel i7-8086k;

graphics card:sapphire rx580 8g;

ssd:sumsang 970 evo m.2 nvme

wifi&bt: bcm94360cd pcie;

I use the post installation clover.zip ,the audio,network,graphics,wifi all work,but have some problems:

1.My sata port ,set bios enabled hot plug,but it can't work.

2.My background I/O panel,the usb 2.0 and 3.0 port can recognize USB flash disk but can't recognize orico usb to sata docking station;only the usb 3.1 port can recognized.

Please help me improve dsdt and clover config.Thanks very much.

Send me Asus-PC.lan.zip