Hackintosh Guide - Sierra / High Sierra / Mojave / Catalina / BigSur on Serie 100/200/300/400 with Clover Bootloader

[gagaraz]

Hi MaLd0n.

Help me to configure DSDT.aml for Mojave10.14 Beta (18A293u) 8700k + Asus ROG STRIX Z370 F Gaming + Radeon RX 560 4GB

Extract the origin of the boot clover F4 + RunMe.app

Thank you

https://www34.zippyshare.com/v/y9xKahpD/file.html

[MaLd0n]

Hi MaLd0n.

Help me to configure DSDT.aml for Mojave10.14 Beta (18A293u) 8700k + Asus ROG STRIX Z370 F Gaming + Radeon RX 560 4GB

Extract the origin of the boot clover F4 + RunMe.app

Thank you

https://www34.zippyshare.com/v/y9xKahpD/file.html

DSDT.aml.zip

[gagaraz]

Good Morning MaLd0n!

Added Clover kexts / Other / : WhateverGreen (1.1.3) --> Apple HDMI Audio Controller & AHCI-300-Series.kext --> Intel Corporation, Series Chipset SATA Controller + RunMe.app

Tell me if everything is okay

https://www49.zippyshare.com/v/1R8LuFev/file.html

Thank you.

[gagaraz]

I do not know if the config.plist settings are checked correctly

[MaLd0n]

same config from HS

[gagaraz]

you can send me a complete clover file ?

Thank you

[zeg66]

Pressed F4 in Clover and got one (1) DSDT.aml file and fifteen (15) SSDT*.aml files, all of them different in size. Disassembled them with iasl and got sixteen (16) new *.dsl files in total. All of these go through maciasl with no errors. How can I tell what patches need to be applied? Most patches appear to be for laptops, this is a desktop system (my profile), running 17F77 with the following issues: (a) it goes to sleep ok but when I press a key to wake it reboots, problem report says "Kernel Extensions in backtrace: com.apple.iokit.IOGraphicsFamily(519.19)" and (b) I would like to investigate if I can make it burn less than 55 watts at idle.

[MaLd0n]

you can send me a complete clover file ?

Thank you

is a same folder, just update kexts and usb patch in config.plist

[MaLd0n]

Pressed F4 in Clover and got one (1) DSDT.aml file and fifteen (15) SSDT*.aml files, all of them different in size. Disassembled them with iasl and got sixteen (16) new *.dsl files in total. All of these go through maciasl with no errors. How can I tell what patches need to be applied? Most patches appear to be for laptops, this is a desktop system (my profile), running 17F77 with the following issues: (a) it goes to sleep ok but when I press a key to wake it reboots, problem report says "Kernel Extensions in backtrace: com.apple.iokit.IOGraphicsFamily(519.19)" and (b) I would like to investigate if I can make it burn less than 55 watts at idle.

???

[TwistedSystems]

Good afternoon MaLd0n.

Starting with a fresh install and used F4 to extract the clean DSDT and used your post clover folder for booting into the system and ran the runme.app without doing anything else. I wanted to optimize this system to 100%. I have not found a DSDT that matches the GA Z270MX-Gaming 5 as of yet. Thanks for the help in advance and will donate to you for your time with this.

Send me iMACs-iPro-2.zip

[MaLd0n]

Good afternoon MaLd0n.

Starting with a fresh install and used F4 to extract the clean DSDT and used your post clover folder for booting into the system and ran the runme.app without doing anything else. I wanted to optimize this system to 100%. I have not found a DSDT that matches the GA Z270MX-Gaming 5 as of yet. Thanks for the help in advance and will donate to you for your time with this.

CLOVER.zip

USE LAST CLOVER VERSION

Replca, reboot and send me new SEND_ME

[TwistedSystems]

Thanks for that. I have installed the latest clover and replaced the clover folder. Ran the runme.app and here is the latest file. Thanks for the help so far.

Send me iMACs-iPro-2.zip

[MaLd0n]

Thanks for that. I have installed the latest clover and replaced the clover folder. Ran the runme.app and here is the latest file. Thanks for the help so far.

delete old SEND_ME in ur desktop, and run app again, just to avoid merge

[TwistedSystems]

I did notice that it was named the same after running it again. Here is the new one for you. Thanks.

Send me iMACs-iPro-2.zip

[MaLd0n]

I did notice that it was named the same after running it again. Here is the new one for you. Thanks.

looks good

u don't need more apfs_patched.efi, the ApfsDriverLoader.efi+AptioMemoryFix.efi solve it now, loads apfs.efi from ApfsContainer located on block device.

[TwistedSystems]

Thanks man, I will remove that one. Everything shows in PCI list and all is well on my end. Sending a donation your way bro! Thank you for the help on this one.

[MaLd0n]

Thanks man, I will remove that one. Everything shows in PCI list and all is well on my end. Sending a donation your way bro! Thank you for the help on this one.

Welcome, bro!

Enjoy!

[MaLd0n]

so what should I use from now on my computer?

if i usually update clover regularly and i have two systems mounted ssd hsierra hdd mojave

use it, but remove csm driver, just use it if u don't have other option

[PlexiPuter]

Hi MaLd0n

I got the Z370 running quickly from a CCC clone of 10.13.5

I booted using a DSDT from a very similar board but It would be great if you could do the same edits to my vanilla DSDT taken from pressing F4 in clover.

I've attached the send me files.

System so far is:

Z370 Gaming K3 (Bios F6)

i7 8700k

intel UHD Graphics

Thanks a lot

PlexiPuter

Send me PlexiPuter Z370.zip

[MaLd0n]

Hi MaLd0n

I got the Z370 running quickly from a CCC clone of 10.13.5

I booted using a DSDT from a very similar board but It would be great if you could do the same edits to my vanilla DSDT taken from pressing F4 in clover.

I've attached the send me files.

System so far is:

Z370 Gaming K3 (Bios F6)

i7 8700k

intel UHD Graphics

Thanks a lot

PlexiPuter

CLOVER.zip

use last clover version