macOS Sierra 10.12.6 bootable USB for Intel PCs

[failax]

EFI/CLOVER/kexts/Other in EFI partition.

 

I added those kexts but hard disk are not shown, even doing this:"Try also FakeID for SATA as 0x9C838086 (under PCI devices)" and this:"fix SATA and add DTGP under ACPI patching/DSDT fix mask (0x00000401)"

My log is attached

preboot.log.zip

[pernacabeluda]

Try putting AHCIPortInjector in EFI/CLOVER/kexts/Other

http://Olarila.com/forum/download/file.php?id=7748

[failax]

Try putting AHCIPortInjector in EFI/CLOVER/kexts/Other

http://Olarila.com/forum/download/file.php?id=7748

 

It worked, thanks!!Installation completed!Now I must fight with drivers...pc is mute and with no internet connection..we hear later..

[failax]

My audio card Realtek ALC1200 Is not recognized, can you show me a package to install?Thanks

I tried with no success multishit driver..

[pernacabeluda]

VoodooHDA or patched AppleHDA

http://www.insanelymac.com/forum/topic/314406-voodoohda-289/

http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/

http://www.insanelymac.com/forum/files/file/496-applehda-patcher/

For patched AppleHDA you need to inject correct layout-id.

[failax]

VoodooHDA or patched AppleHDA

http://www.insanelymac.com/forum/topic/314406-voodoohda-289/

http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/

http://www.insanelymac.com/forum/files/file/496-applehda-patcher/

For patched AppleHDA you need to inject correct layout-id.

 

I try this afternoon thanks.Booting from Clover on usb, other O.S. are shown, but if I try to select them the pc reboots but don't open nor Windows nor Ubuntu, only Sierra goes ahead if selected.

[pernacabeluda]

I have not tested but I believe other OS will only boot if installed in the same mode as Clover (UEFI or legacy).

[failax]

VoodooHDA or patched AppleHDA

http://www.insanelymac.com/forum/topic/314406-voodoohda-289/

http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/

http://www.insanelymac.com/forum/files/file/496-applehda-patcher/

For patched AppleHDA you need to inject correct layout-id.

 

I tried the first and the third link with no success, I haven't understood how to try second one..sorry I'm new to Apple...

[pernacabeluda]

Read detailed instructions on the links, you need to inject layout-id to get patched AppleHDA working, there are several ways to do it.

[failax]

Read detailed instructions on the links, you need to inject layout-id to get patched AppleHDA working, there are several ways to do it.

 

My Realtek Alc1200 isn't listed, it arrives to ALC1150, i tried this last kext with multishit but it doesn't work.VoodoHDA doesn't work too.Maybe some kext are patched now.It's there a way to insert the right kext in clover usb boot?

[pernacabeluda]

It's listed in https://github.com/vit9696/AppleALC/wiki/Supported-codecs

I believe audio kexts don't work from Clover folder because of dependencies.

You can try this

http://Olarila.com/forum/viewtopic.php?f=40&t=5844

[vFever]

Hi,

Does anyone have the full instructions in a list on what to do with the .raw file? Tbh I'm so confused

[pernacabeluda]

It's in the opening post

Copy the .raw file to an USB stick

For Windows

http://en.opensuse.org/SDB:Create_a_Live_USB_stick_using_Windows

or

http://sourceforge.net/projects/win32diskimager/

For OS X

http://Olarila.com/forum/viewtopic.php?f=28&t=3736

[richardyusan]

i've enabled Kernel PM patch in binary patching as instruction for haswell/broadwell processor

but still facing auto reboot

[pernacabeluda]

Check if you have NX bit in BIOS options and enable it

http://Olarila.com/forum/viewtopic.php?f=2&t=1804

[xelalieneilalex]

Managed to boot via Enoch with boot flags -v -x cpus=1

But Sierra cannot be installed to an MBR primary partition (even if formatted to Mac Journalised)

Laptop model: HP 14-d004TX

Processor: 2.4 GHz Intel Core i3-3110M with Intel HD Graphics 4000

GPU: NVIDIA GeForce 820M

RAM: 2 GB 1600 MHz DDR3L SDRAM (1 x 2 GB)

[pernacabeluda]

For what reason? Post the error message.

[xelalieneilalex]

For what reason? Post the error message.

 

Can't seem to find any significant error on verbose boot, but upon reaching the install screen, graphics are not laggy, keyboard & touchpad are working.

Here I successfully created the partition for installation:

Primary MBR (disk0s3):

Then this error:

BIOS settings are OK (Legacy mode ON, Secre Boot OFF, USB boot priority)

MD5 sum of raw file already checked and matched;

So I am still wondering if my laptop is not supported for Sierra install...

[pernacabeluda]

Try to change SMBIOS settings, save this as /Extra/smbios.plist

http://Olarila.com/files/SMBIOS/MacBookPro9.2.plist

[zloduh]

Hi guys

i have managed to install it on Elitebook 8460p. But it only boots from usb.

I have downloaded the latest cloverefi and installed it on my hard but it still not booting.

I am missing lan wifi and sound drivers... i have kexts installed but they do not activate as i am booting from usb.

I dont have efi enabled it didnt need to boot from usb i think i dont need to boot from hard.

Can anyone assist me a bit please. Let me know if you need more info

[NaniBot]

Hi, I am currently stuck with a kernel panic : DSMOS : SMC returned incorrect key. I've tried changing smbios to macpro but it didn't work. I've also changed the fakesmc kext (both kexts : 1 located in the Extra directory and the other located inside the EFI/Extra folder). But even that didn't work.

I own a HP laptop that has a insyde bios. I'm booting in legacy mode(not UEFI). I am using the "Kernel Pmpatch" and "Kernel Lapic Patch" selected in the Binaries Patching option in clover menu.

I've tried hard to search for this kernel panic online but with no luck. Please help.

[Dekill93]

i will try, first my action to install

[kobiandy]

Hello guys. I have been using your bootable images successffully for a while now I must say you guys are the best. I know how frustrating hackintosh can be and you have somehow simplified it for many. My issue here is with a new laptop I recently purchased. Aspire E5-574G(i5 6200U gtx920M intel hd 520). I boot from clover and it just gives me the usual quick rush of texts and panics at screen shown. Please if anyone has an idea of how to solve this as I cannot enter installer. Thanks in advance

[failax]

I have a motherboard MSI x99a SLI plus and intel 5820k, installation doesn't begin, do I have to change something?

[MaLd0n]

npci=0x2000 and nullcpupm, after u need patches Pike