macOS 26 Tahoe Hackintosh

[Fares Shady]

What about me please :((

[Slice]

23 hours ago, Fares Shady said:

There is no NVME options in bios, only found sata mode and I changed it to ahci.
Still not working.
I'm using acer predator helios 300 PH315-53 bios so limited.
But how it used to work before?

Sorry but the problem with your BIOS.
I have GA170 motherboard with M2 slot. I inserted here NVMe noname drive (China) just boot and install here Clover and Sequoia. Nothing to do in BIOS. Nothing to do in Clover.

Now I boot from EFI from the NVME drive, choose Sequoia and all is fine.

[MaLd0n]

@Slice Can you fix the XHCI patch limit in Clover for Tahoe? 

[Slice]

14 minutes ago, MaLd0n said:

@Slice Can you fix the XHCI patch limit in Clover for Tahoe? 

I will look but I think (as well as Vit9696) that this patch should be avoided because using more then 15 ports per hub may cause undefined behaviour of the system because for port number there are only 4 bits (0..15) and extra bit may overlaps other bit.

The patch may be used initial for testing which connector is from which port to create own port maps. This port maps will exclude some unnecessary ports to have only 15 of them. See my LegacyUSB3.kext
https://cloud.mail.ru/public/KCGk/cRHbqg4sw 

[MaLd0n]

48 minutes ago, Slice said:

I will look but I think (as well as Vit9696) that this patch should be avoided because using more then 15

Yes, Slice. I just need it to create installer for many chipset in one EFI folder only, but after installation we need this remap, is ever the best idea. Thank you!

[Slice]

You may exclude for installation any 4-8 first HS** ports to have SS** ports working. Only for installation!

And then remap.

[MaLd0n]

Yes, but the big truth is that this patch has never caused any problems and continues to work beautifully on the Sequoia. 😁

[Fares Shady]

7 hours ago, Slice said:

Sorry but the problem with your BIOS.
I have GA170 motherboard with M2 slot. I inserted here NVMe noname drive (China) just boot and install here Clover and Sequoia. Nothing to do in BIOS. Nothing to do in Clover.

Now I boot from EFI from the NVME drive, choose Sequoia and all is fine.

But how I used to have macOS before and everything was fine!!

[Slice]

9 hours ago, Fares Shady said:

But how I used to have macOS before and everything was fine!!

It was NVME? And BIOS saw it before? What is changed? Before you started any OS.

[joaopaulomartins]

On 6/18/2025 at 2:33 AM, MaLd0n said:

Use only mandatory kexts

This is for me? What mandatory kexts (virtualsmc /Applealc/Lilu) some more?

Can you send me a EFI paste for my hardware to install Tahoe?

I try with other EFI you put in my sequoia when you make me a virtual assistance.

Thank you

[zaza]

@MaLd0n @Slice does any of you successfully installed Tahoe with clover? my skylake is giving me headache.. 

[MaLd0n]

3 hours ago, zaza said:

@MaLd0n @Slice does any of you successfully installed Tahoe with clover? my skylake is giving me headache.. 

https://olarila.com/topic/42748-macos-26-tahoe-with-clover-on-core-ultra-9-285k-hackintosh/

Run like your avatar, a beast. 

 

[zaza]

2 minutes ago, MaLd0n said:

https://olarila.com/topic/42748-macos-26-tahoe-with-clover-on-core-ultra-9-285k-hackintosh/

Run like your avatar, a beast. 

 

Have you premade clover efi supports Tahoe? have tried everything...

[MaLd0n]

Ill update after beta 2 or 3 for check what work or not

[joaopaulomartins]

Hello

My instalation of Tahoe stop in image 1 and few seconds later pass to image 2.

Can you help me to know what i need to change in my EFI?

I send my EFI of Usb boot .

[joaopaulomartins]

On 6/20/2025 at 11:56 PM, joaopaulomartins said:

Hello

My instalation of Tahoe stop in image 1 and few seconds later pass to image 2.

Can you help me to know what i need to change in my EFI?

I send my EFI of Usb boot .

https://ibb.co/TBmBrDdy

https://ibb.co/ccR8VNtr

Edited June 23, 2025 by joaopaulomartins

[zaza]

15 hours ago, MaLd0n said:

Ill update after beta 2 or 3 for check what work or not

Nice one..

[Red Velvet]

it jut wont work for me I'm on a laptop with a Skylake cpu I've tried usbMAP, I've tried making the efi folder using open core simplified, I tried using the olarila efi folder mod, I've tried switching my smbios to MacPro 7,1 and iMac20,1 and it just never works either I get a memory panic error or I get the 🚫 screen. can someone help me

[Kankon]

Thanks Maldon
working perfect also VGA AMD 6700 

[Slice]

On 6/20/2025 at 6:19 PM, zaza said:

@MaLd0n @Slice does any of you successfully installed Tahoe with clover? my skylake is giving me headache.. 

Yes I successfully installed Tahoe with Clover. Four sequential reboots, final stage "nine seconds remains..." and I see desktop.

But WindowsServer crashed a few seconds later because of Polaris card.

Clover is perfect for Tahoe but I wait until Apple will cure WindowServer.