macOS 26 Tahoe Hackintosh

[jm26200]

Hello my friend Daniel

The key combination D, Q, P, A, K
gives me a file ==> USBMap.kext which, added to EFI, doesn't work, so no luck. I finally rebuilt my Sequoia SSD and I'll wait a bit.
Thank you so much, you are a great example of altruism.

regards

Capture d’écran 2025-06-15 à 07.05.51.zip

[Navajyoti Bayan]

During sleep mode on Tahoe my machine shutdown, Is there any solution for it now or have to wait for OpenCore update?

[MaLd0n]

8 hours ago, jm26200 said:

USBMap.kext

Post this kext here

7 hours ago, Navajyoti Bayan said:

During sleep mode on Tahoe my machine shutdown, Is there any solution for it now or have to wait for OpenCore update?

Seems a real time clock problem.

[jm26200]

Ty Daniel and good afternoon

In folder Results === > USBMap.kext

after keys D, Q, P, A, K

so very strange before try with hackintools Export 2 .aml for folder ACPI  and stop same line no progress !!!

Ty again sir
Regard 

USBMap.kext.zip

[MaLd0n]

18 minutes ago, jm26200 said:

In folder Results === > USBMap.kext

EFI TAHOE.zip

-Delete old EFI folder and paste new then empty trash. Don't use merge files.
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead.
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen.

[jm26200]

very sorry bad new

So I'm reporting back to you after copying the EFI folder on my SSD. restart
1 - Reset NVRAM
2 - Automatic reboot on the drive

and a screen of lines unreadable given the speed and an additional half screen, and restarting the PC.

I wish you a good afternoon and thank you very much for your dedication and your help.

regard

[MaLd0n]

Post one video 

[jm26200]

on the second screen here is the reboot which arrives after these last lines if that can give you a clue

I will make a video after clicking on install macOS Beta I am not very well equipped with an iPhone X or an iPad mini from 2012 but i try and i see if good

IMG_10233.zip

IMG_6556.zip

Edited June 15, 2025 by jm26200

[MaLd0n]

Your USB kext is not remmaped. U need to use USB2 port.

[jm26200]

hi sir

My USB drive is properly connected to the USB2 port. I'll repeat the process to get the mapped file by following your instructions D, Q, P, A, K.

And I'll check on the Insanelymac forum. I just read a not-so-encouraging post.

maly70
Members
257
Gender: Male
Posted 3 hours ago
Hi, none of my z790, z590, and z490 work with Tahoe. I couldn't install, and at the second boot, I keep getting KernelManager not active.

I did install the latest OC and kext files, removed all USB-related kexts and .aml files. I got SSDT-UIAC, but still, no luck.

 

Good rest    good night  sIR

3:09 go take my breakfeast and go out for walkin 3 km   seee later   for  macos tahoe

great thnxxs 

Regards

 

[Antonio BQ]

Tengo el mismo problema. No tengo teclado ni ratón.

Edited June 16, 2025 by Antonio Belso Quesada

[Slice]

3 hours ago, Antonio Belso Quesada said:

Tengo el mismo problema. No tengo teclado ni ratón.

Because of well known USB issue. See the discussion.

[jm26200]

Hi Daniel. good new morning try again and surprise all. success for install macOS Tahoe

Great thnxsss sir 

tc always

 

regard

PS : but no wiffi later try with itlmw and hairport ????  and  for install  for  arg  only -V

Capture d’écran 2025-06-17 à 07.03.54.zip

Edited June 17, 2025 by jm26200

[Fares Shady]

I have a problem I don't see my NVME SSD inside the installation, I tried to add that NVMeFix.kext and also in the config.plist but it didn't help.
I was so excited to try but now I can't find any solution 😕
I'm so sure my SSD is compatible it's WD I used it before to install Monterey and it worked fine.
Please help me 😞 

[MaLd0n]

Check NVME options on bios/uefi setup.

[Fares Shady]

There is no NVME options in bios, only found sata mode and I changed it to ahci.
Still not working.
I'm using acer predator helios 300 PH315-53 bios so limited.
But how it used to work before?

[MaLd0n]

Nothing about Storage?

[Fares Shady]

Yes nothing only sata mode and if I want to enable ports or not and for me all ports are on

[joaopaulomartins]

Hello MaLd0n

again in a new battle, now to install Mac Os Tahoe in my hackintosh.

I make a pen bootable, but stop in the image attached. Can you help me?

Best regards from Portugal

IMG20250617193503.jpg.zip

[MaLd0n]

Use only mandatory kexts