Mavericks on HP Sleekbook-14 from Clover USB partial success

[paaguti]

Hi folks,

I'm nearly there...

I downloaded and transfered the 10.9.5 USB Installer with Clover. To kix screen, etc. I used the config.plist from https://github.com/RehabMan/OS-X-Clover-Laptop-Config.git that fits my slekbook best. I get to the install screen but I don't have keyboard. Any ideas?

This is my lspci

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)

00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)

00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)

00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)

01:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)

Additional info:

from cpuid

(synth) = Intel Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge E1/N0/L1) / i7-3000 (Ivy Bridge E1), 22nm

CPU 3:

vendor_id = "GenuineIntel"

version information (1/eax):

processor type = primary processor (0)

family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6)

model = 0xa (10)

stepping id = 0x9 (9)

extended family = 0x0 (0)

extended model = 0x3 (3)

(simple synth) = Intel Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge E1/N0/L1) / i7-3000 (Ivy Bridge E1) / Mobile Core i3-3000 (Ivy Bridge L1) / i5-3000 (Ivy Bridge L1) / Mobile Core i7-3000 (Ivy Bridge E1/L1) / Xeon E3-1200 v2 (Ivy Bridge E1/N0/L1) / Pentium G1600/G2000/G2100 (Ivy Bridge P0) / Pentium 900/1000/2000/2100 (P0), 22nm

miscellaneous (1/ebx):

process local APIC physical ID = 0x3 (3)

cpu count = 0x10 (16)

CLFLUSH line size = 0x8 (8)

brand index = 0x0 (0)

I have 6 gig RAM on the machine.

Edited December 30, 2014 by Guest

[mendietinha]

you need a ps2 kext. probably voodoops2 from rehabman.

[paaguti]

Hi,

I have the original 10.9.5 installer image I got through the forum and it seems to have the Voodoo keyboard extensions:

paag@HP-Sleekbook:~$ ls /mnt/EFI/CLOVER/kexts/10.9/

AHCIPortInjector.kext GenericUSBXHCI.kext VoodooPS2Mouse.kext

AppleACPIPS2Nub.kext IOAHCIBlockStorageInjector.kext VoodooPS2Trackpad.kext

Disabler.kext VoodooPS2Controller.kext

FakeSMC.kext VoodooPS2Keyboard.kext

I have read somewhere that the HP's need a special config.plist for Voodoo. Someone aware of that?

[artur-pt]

hello

maybe u must use this one

delete the others

https://bitbucket.org/RehabMan/os-x-voodoo-ps2-controller/downloads

good hack

[paaguti]

Hi, thanks for the advice.

First try:

Remove ApplePS2* and Voodoo* from EFI/CLOVER/kexts/10.9 and install recommended VoodooPS2 there. Boot with injected kexts and no cache... still waiting for Bluetooth mouse and keyboard. however, mouse pointer appears and can be moved with the trackpad...

I didn't install the Daemon nor the launcher, though

[artur-pt]

hello

u must explain what is ur achieve .. bluetooth devices ?

for that u don't need ps2 kext .. but a working bluetooth .. so must read about ur bluetooth

good hack

[paaguti]

Hi,

Sorry if I didn't write a clearer description... I achieve two things: the pointer responds but then the screen shows the bluetooth mouse and keyboards and how you have to switch them on. It seems to get stuck waiting for the keyboard. I have tested and I do have keyboard in single user mode.

Should I try to remove the VoodooPS2 kext from EFI/CLOVER/kexts/10.9 and install it on S/L/E on the USB stick, including the daemon?

Thanks for bearing with me

[artur-pt]

hello

u stuck in a screen with a keyboard ? is that in installer ..

if so use a usb keyboard to go on..

good hack

[mendietinha]

sometimes hitting space a few times do the trick.

space or enter or esc. i can´t remember wich one.

[paaguti]

Thanks a ton! That was the clue!

I have Mavericks installed and running. Now I have to find the drivers for my USB WiFi, then the DSDT for the power button, the sound, etc. But at least I can start managing my iPods again

[paaguti]

Sent from the Mavericks with USB WIFI dongle

This is gorgeous. The only thing is that sometimes the Bluetooth assistant wakes up saying that there is no keyboard. Just a minor nuisance, though.

Thanks folks!

[paaguti]

A couple of days enjoying Mavericks on my Sleekbook and I'm not able to make a complete shutdown or reset. Anyone can help there? How can I do that through Clover?

BTW, my method of installing Ubuntu (w UEFI support) first and then Mavericks, copying CLOVER from the USB to the UEFI partition makes modifying the Clover config quite easy.