Yosemite installation via pen drive with Clover

[Jeordanis]

I use this same USB device to install yosemite in my older motherboard without change the bios settings or use any boot flag, so the usb device is fine. Help me guys, I'm desperate.

[pernacabeluda]

It may be a compatibility issue.

Try to update Clover.

[Jeordanis]

How can i do that? Please note that I have no installation of os x.

[pernacabeluda]

Then it's not an option.

Sorry, I really have no idea.

[Jeordanis]

Then it's not an option.

Sorry, I really have no idea.

 

Ok i use another hackintosh to update clover to 2999 version. Same problem.

[artur-pt]

hello

maybe ur onboard graphics is the problem ...

try to set the right ig-platform-id ...

good hack

[pernacabeluda]

Did you try all Clover USB fixes?

Try to remove all kexts from Clover folder and install only the latest FakeSMC from here

http://www.projectosx.com/forum/index.php?showtopic=2585

[Jeordanis]

hello

maybe ur onboard graphics is the problem ...

try to set the right ig-platform-id ...

good hack

 

Where and how please.

[Jeordanis]

Ok i manege to get into the installer changing the memory profile in the bios setting and using chameleon. I do not have graphics acceleration now. Do you recomend me install clover now?

[pernacabeluda]

What USB setup worked for you (BIOS, kext and boot args) after changing the memory profile?

Install Clover and inject ig-platform-id

http://clover-wiki.zetam.org/Configuration/Graphics#ig-platform-id

http://rampagedev.wordpress.com/more-guides/intel-hd-graphics-guide/

[Jeordanis]

I dont use any special config or boot flag. I just boot to the usb without any modification to the installer, and press 1 to enter to chameleon. After that i try all your advices.

[Jeordanis]

Instaled clover and now im getting: System uptime in nanoseconds.

[artur-pt]

hello

u are injecting some old kext .. and the new ones are present in cache..

good hack

[Jeordanis]

Hi

How can i solve that?

[pernacabeluda]

Looks like you are using tonycrap tools, you should ask for help in his forum

http://www.tonycrapx86.com/attachments/yosemite-desktop-support/112148d1415284253-ga-z97x-ud5h-clover-img_0371.jpg

[Jeordanis]

Looks like you are using tonycrap tools, you should ask for help in his forum

http://www.tonycrapx86.com/attachments/yosemite-desktop-support/112148d1415284253-ga-z97x-ud5h-clover-img_0371.jpg

 

Hi

Im using the Olarila usb build. I use the picture of tonycraps because this user have the same problem.

[pernacabeluda]

Post a picture of your own screen. If you used Olarila image and official Clover installer, it can't be exactly like that one.

If the installer boots, most likely you didn't configure Clover correctly.

[Bruxo]

Hello everyone !!!

I'm Yosemite sitema installed on HD seamlessly with Bootloader Clover on the EFI partition

But will problems when turning off the machine

The sitema off normally until the HD hear it off but the cooler cabinet and the CPU fan still working !!!

I'm not using DSDT or SSDT, all settings are contained in Config.plist of Clover, activated the FixShutdown option and even then I did not succeed.

[pernacabeluda]

FixShutdown works for Asus, not for Gigabyte

Adds If(arg=5){} to method _PTS. This trick may repair shutdown problems for some systems (ASUS).

http://clover-wiki.zetam.org/Configuration/ACPI#DSDT-/-Fixes

You may try other Clover fixes or apply Gigabyte shutdown patch in DSDT

http://clover-wiki.zetam.org/Configuration/ACPI#DSDT-/-SuspendOverride

http://clover-wiki.zetam.org/Configuration/ACPI#HaltEnabler

http://Olarila.com/forum/viewtopic.php?f=7&t=44

[Bruxo]

Thank pernacabeluda !!!

Yes I use Gigabyte card as my signature

DSDT be necessary in Clover or Config.plist already do all the fix?

config.plist.zip