Yosemite installation via pen drive with Clover

[Jeordanis]

I dont use any special config or boot flag. I just boot to the usb without any modification to the installer, and press 1 to enter to chameleon. After that i try all your advices.

[Jeordanis]

Instaled clover and now im getting: System uptime in nanoseconds.

[artur-pt]

hello

u are injecting some old kext .. and the new ones are present in cache..

good hack

[Jeordanis]

Hi

How can i solve that?

[pernacabeluda]

Looks like you are using tonycrap tools, you should ask for help in his forum

http://www.tonycrapx86.com/attachments/yosemite-desktop-support/112148d1415284253-ga-z97x-ud5h-clover-img_0371.jpg

[Jeordanis]

Looks like you are using tonycrap tools, you should ask for help in his forum

http://www.tonycrapx86.com/attachments/yosemite-desktop-support/112148d1415284253-ga-z97x-ud5h-clover-img_0371.jpg

 

Hi

Im using the Olarila usb build. I use the picture of tonycraps because this user have the same problem.

[pernacabeluda]

Post a picture of your own screen. If you used Olarila image and official Clover installer, it can't be exactly like that one.

If the installer boots, most likely you didn't configure Clover correctly.

[Bruxo]

Hello everyone !!!

I'm Yosemite sitema installed on HD seamlessly with Bootloader Clover on the EFI partition

But will problems when turning off the machine

The sitema off normally until the HD hear it off but the cooler cabinet and the CPU fan still working !!!

I'm not using DSDT or SSDT, all settings are contained in Config.plist of Clover, activated the FixShutdown option and even then I did not succeed.

[pernacabeluda]

FixShutdown works for Asus, not for Gigabyte

Adds If(arg=5){} to method _PTS. This trick may repair shutdown problems for some systems (ASUS).

http://clover-wiki.zetam.org/Configuration/ACPI#DSDT-/-Fixes

You may try other Clover fixes or apply Gigabyte shutdown patch in DSDT

http://clover-wiki.zetam.org/Configuration/ACPI#DSDT-/-SuspendOverride

http://clover-wiki.zetam.org/Configuration/ACPI#HaltEnabler

http://Olarila.com/forum/viewtopic.php?f=7&t=44

[Bruxo]

Thank pernacabeluda !!!

Yes I use Gigabyte card as my signature

DSDT be necessary in Clover or Config.plist already do all the fix?

config.plist.zip

[pernacabeluda]

You need to test. If SuspendOverride and/or HaltEnabler in config.plist do not work, try the DSDT patch.

[Bruxo]

Thank you for your attention pernacabeluda

I used SuspendOverride and / or HaltEnabler in Config.plist but have had no effect !!!

I decided to use a copilada DSDT and removed all fix in config.plist of Clover and now deslina hardware perfectly !!!

Thanks for the explanations

DSDT.aml.zip