Jump to content
[ IMPORTANT ] Premium and Donators users ×
Olarila Professional Hackintosh Services ×

Stuck at first boot from HDD


ChrisOboe

Recommended Posts

Hey Guys,


this is my first Hackintosh install, so i'm not very experienced.


Like the title says i the pc hangs at booting the first time from hdd.

What i did: I downloaded the mavericks usb raw image and copied it to my usb stick.

I bootet via UEFI the usb stick, i got to clover and selected to boot from the usb stick.

I got to the mac installation program. I installed it and when finished i restarted my system.

I bootet again from usb, but now i select in Clover to boot from my osx hdd.

Then i get the verbose boot of the installed mac, but it gets stuck somewhere.


Here is the output of the last console messages:

init
probe
start
DSMOS has arrived
[iOBluethoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xa400
[iOBluethoothHCIController][start] -- completed
VM Swap Subsystem is ON

**** [iOBluethoothHostControllerUSBTransport][configurePM] -- ERROR -- waited 30 seconds and still did not get the commandWakeup() notification -- 0xa400 ****
[iOBluethoothHCIController][hardwareSetupComplete] Failed setup: 0xFF82 (kBluetoothSyncHCIRequestTimedOutWaitingToBeSent)
REQUIRE_NO_ERR failture: 0xff82 - file: /SourceCache/IOBluetoothFamily_kexts/IOBluetoothFamily-4240.4.1/Core/Family/HCI/IOBluetoothFamily.cpp:24451

**** [iOBluethoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- ErrorII -- Something went wrong in the setup process. Could not communicate with Bluetooth 

Here is a screenshot with more information:

http://abload.de/img/10364032_47335069279796oh3.jpg


I don't know anything about the mac boot process, so i cant say if the boot stops because of bluetooth, or if the bluetooth error is just a little problem and the cause of the hangup is something different.


here are information about my hardware:

its an Acer Aspire R7-572G

peach ~ # lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 2 (rev e4)
00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
03:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev ff)

peach ~ # cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 69
model name      : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz
stepping        : 1
microcode       : 0x15
cpu MHz         : 2694.281
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64
monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid
bogomips        : 4790.23
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:

 

I hope you can help me.

Greetings,

ChrisOboe

Link to comment
Share on other sites

hello


is a graphics problem


must find the right ig-platform-id for ur intel hd


is only that one it work..


http://www.insanelymac.com/forum/topic/288241-intel-hd4000-and-haswell-inject-aaplig-platform-id/


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

thanks for your fast answer.

I tried almost alle ig-platform-id's i could find in the internet but none of them worked.

I found out, that if i press enter in clover and select to boot in safe mode i get graphics and a welcome wizard where i can set my keyboard language and network settings (but i cant use is properly because everytime i'm finished with the wizard it restarts, i think this is because of safe mode)


why does my graphics work in safe mode and if i boot from the usb installer, but not when i boot normally from my hdd?

is there anything besides ig-platform-id i can try to make it work?


greets,

ChrisOboe

Link to comment
Share on other sites

hello


ur graphics don't work at all in safe mode


only have a limited image.. and also several things don't be loaded


only gonna work the intel hd .. so u must try the several platform-id


for now to install .. just remove the graphics kext see in image guide how to


when end the install .. then u have problems if don't use the right platform-id


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...