Succes install ventura, Dell Alienware M17x R3

[ovidoi]

Hello, I managed to install macos Ventura and Monterey on my laptop on separate hdd using the same efi bootloder and clover respectively with the same settings, 
kext and drivers. For the video part, I installed OCLP 0.5.1 for Intel HD 3000 and AMD Radeon HD6850M, but I have two problems, 
on the intel hd 3000 the ventura freezes after 5 minutes and on the amd radeon I have no transparency, both are seen correctly, 
intel hd 3000 Monterey doesn't crash, but AMD Radeon crashes. What do you advise me? During the installation I used opencore because the system boots in UEFI mode
 from the USB and then I used CLOVER because the system does not always boot in UEFI from the HDD. 

Edited November 22, 2022 by ovidoi

[t3ch]

i guess your graphic card is one but divided into two.. on notebook/laptop..  like mine. well what here works is intel graphics and i am happy with it. how i managed installation is to switch to intel graphic in bios, when you can. when have used reset nvram button bios is gone.. now have only boot menu. be happy with this.

if you need help with resolution because is 1024 only thewn say maybe i can help.

i see your screen super big.

what is your processor company¿

okok

 

show config.plist  i guess bootargs are important.

first manage to start .. to boot.. use desktop coffy EFI.. and when you can boot play more.

or use USB EFI if that works

[ovidoi]

Hello, I have two video cards ATI RadeonHD 6850M and Intel HD3000, 
the video cards work at the maximum resolution 1600x900 but also at the intermediate ones.
 The one from Intel works well in Monterey but crashes in Ventura after 3-4 minutes
 of operation, the one from ATI (Terrascale 2) crashes in Monterey but in Ventura it works 
but no have transparency even though it is seen and installed correctly with OCLP 0.5.1. 
Alienware M17x R3 - MacBook pro 8.3 CPU i7-2760QM 2.2, turbo 3.2 Ghz
Clover 5150 efi mode from HDD, only UEFI boot from usb stick.

When I installed Monterey or Ventura I booted from usb with opencore but after 
installation I use clover without problems, my problems are the blocking of the 
intel video card in Ventura and the lack of transparency of the ATI one also in ventura.

I will also put the config but now I put the ssd with Mojave, tomorrow I will put the one 
with ventura again to see what else I can do with it, now I'm tired after work.

If you can share your efi please. Thank you!

[t3ch]

why you like both oss? anyway happy for you***

like idea of sharing EFI!!! lets make some special repo or similar for this. best git.. ?

[ovidoi]

Hello, I need 2-3 more days for the tests and then I will share my efi,
 I want to try something else, also for Monterey and Ventura. Good evening.